



STM32F103C8T6 小系統板 單片機 核心板 STM32開發板 ARM
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
- 詳細資訊
商品說明
STM32F103C8T6 小系統板 單片機 核心板
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Lclock, reset and power management
- 2.0 to 3.6 V supply and I / O pins
- Power on / off reset (POR / PDR), programmable voltage monitoring(PVD)
- 4 ~ 16MHz crystal oscillator
- Built-in factory-calibrated 8MHz RC oscillator
- Built-in calibrated 40kHz RC oscillator
- PLL that generates the CPU clock
- 32 kHz RTC oscillator with calibration function
Low power consumption
- Sleep, Standby and Standby modes
- V BAT supplies power to the RTC and the back-up registers
L2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- Conversion range: 0 to 3.6V
- Double sampling and hold function
- Temperature sensor
LDMA:
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPI, I 2 C and USART Up to 80 Fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can tolerate 5V letter number
L Debug mode
- Serial single-wire debugging (SWD) and JTAG interfaces Up to 7 timers
- Three 16-bit timers, up to four for each timer Input Capture / Output Compare / PWM or Pulse Count channels And incremental encoder inputs
- One 16-bit with dead zone control and emergency brake for motors
Control the PWM Advanced Control Timer
- Two Watchdog Timers (Standalone and Windowed)
- System time timer: 24-bit self-decrementing counter Up to 9 communication interfaces
- Up to 2 i2c interfaces (Supports SMBus / PMBus)
- Up to 3 USART interfaces (supports ISO7816 interface, LIN, IrDA interface and modem control) Up to 2 SPI interfaces (18 Mbit / s)
- CAN interface (2.0B active)
- USB 2.0 full speed interface
LCRC computing unit, 96-bit chip unique code
STM32模擬器接線

USB轉TTL模組接線

腳位定義

相關商品
-
STMicroelectronics NUCLEO-F413ZH 開發板
0 滿分 5 分NT$1,600 未稅STMicroelectronics 的 NUCLEO-F413ZH 是 STM32 Nucleo-144 板。該板為用戶提供了一種經濟實惠且靈活的方式,可以使用STM32微控制器嘗試新概念和構建原型,從性能,功耗和功能的各種組合中進行選擇。
-
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A4是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模組SPSGRF-868,該模組工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,方便用戶在不同MCU系列中進行程序移植。
-
ODYSSEY-STM32MP135D 內建4GB eMMC 開發板 Cortex-A7 STM32/4Gb/PoE
0 滿分 5 分ODYSSEY-STM32MP135D 採用 32 位 Arm Cortex-A7 STM32 MPU,安裝在 8.5 x 5.6 mm的機板上,使其成為用戶最方便且節省空間的選擇。 它還支援 Yocto 和 Buildroot 操作系統,為需要不同軟體選項的用戶提供靈活性。ODYSSEY 專為工業控制應用而設計,可通過允許兩個網絡端口上的備份輸入來提供線路冗餘。 這可以確保在網絡故障或中斷時數據的穩定性和安全性。
NT$1,600NT$1,360 未稅 -
X-NUCLEO-IDW01M1 WiFi 擴展板 SWPF01SA module STM32 Nucleo
0 滿分 5 分X-NUCLEO-IDW01M1 Wi-Fi擴展板SWPF01SA module STM32 Nucleo
Expansion Boards 用於:STM32 Nucleo 核心:ARM Cortex M3 數據匯流排寬度:32 bit 描述/功能:Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo 接口。
- 產品: Expansion Boards
- 用於: STM32 Nucleo
- 核心: ARM Cortex M3
- 數據匯流排寬度: 32 bit
- 描述/功能: Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo
- 接口類型: UART
- 最高工作溫度: + 85 C
- 最低工作溫度: – 40 C
- 系列: STM32 NUCLEO
- 評估工具: SWPF01SA
-
NUCLEO-F446RE STM32F446RE Mbed 開發板 原裝意法半導體進口
0 滿分 5 分NUCLEO-F446RE 利用ST的專有ART Accelerator™、智能架構、先進的Flash技術及其嵌入式ARM Cortex-M4內核,實現了225 DMIPS和608 CoreMark® 的領先性能(180MHz頻率下從嵌入式Flash執行)。通過多個接口進行高效並發通信,使工業、科技、醫療以及物聯網(Internet-of-Things,IoT)應用更加智能並具有更多交互。
NT$800NT$760 未稅 -
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
0 滿分 5 分NT$800 未稅STM32 Nucleo 開發板 為使用者提供了一個經濟實惠且靈活的平台,可以嘗試新想法,並使用任何 STM32 微控制器系列來建立原型,從中選擇各種性能、功耗和功能的組合。由於支援 Arduino™ 連接功能和 ST Morpho 接頭,使用者可以透過多種專業擴充板輕鬆擴展 STM32 Nucleo 開放式開發平台的功能。
-
STM32 Nucleo-64 (NUCLEO-F103RB):內建 ST-LINK、相容 Arduino 脚座
0 滿分 5 分NT$760 未稅這款STM32 Nucleo-64 開發板,採用STM32F103RB微控制器,提供經濟且靈活的開發平台。它支援Arduino Uno V3與ST Morpho擴展介面,並內建ST-LINK/V2-1調試器/編程器,無需額外探針。板載電源管理、LED和按鈕,且相容多種IDE,適合物聯網、嵌入式系統等原型開發。
-
NUCLEO-F411RE STM32F411RE Mbed 開發板 原裝意法半導體進口 Arduino 相容腳座
0 滿分 5 分STM32 Nucleo-64開發板採用STM32F411RE MCU,支持Arduino和ST形態連接。STM32 Nucleo板為用戶提供了一種經濟實惠且靈活的方式,可以從STM32微控制器中嘗試新的概念並構建原型,從性能,功耗和功能的各種組合中進行選擇。Arduino™Uno V3連接支持和ST morpho頭部允許輕鬆擴展STM32 Nucleo開放平台的功能
NT$740NT$660 未稅 -
STM32-L053R8 Nucleo-64 開發板 | 支援 Arduino 及 ST morpho 連接 (整合 ST-LINK 偵錯器)
0 滿分 5 分STM32L053R8 Nucleo-64 是一款搭載超低功耗 ARM Cortex-M0+ 核心的開發板。支援 Arduino Uno R3 與 ST morpho 接頭,整合 ST-LINK 偵錯器,無需額外探針即可快速建立原型。
NT$846NT$700 未稅 -
STM32 Nucleo-144 MCU / NUCLEO-F767ZI 開發板
0 滿分 5 分NT$1,200 未稅STM32 Nucleo-144 NUCLEO-F767ZI 為使用者提供了一種經濟實惠且靈活的方式,讓他們可以從 STM32 微控制器提供的各種性能和功耗特性組合中進行選擇,從而嘗試新概念並建立原型。對於相容板,內部或外部 SMPS 顯著降低了運作模式下的功耗。
















