



STM32F103C8T6 小系統板 單片機 核心板 STM32開發板 ARM
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
- 詳細資訊
商品說明
STM32F103C8T6 小系統板 單片機 核心板
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Lclock, reset and power management
- 2.0 to 3.6 V supply and I / O pins
- Power on / off reset (POR / PDR), programmable voltage monitoring(PVD)
- 4 ~ 16MHz crystal oscillator
- Built-in factory-calibrated 8MHz RC oscillator
- Built-in calibrated 40kHz RC oscillator
- PLL that generates the CPU clock
- 32 kHz RTC oscillator with calibration function
Low power consumption
- Sleep, Standby and Standby modes
- V BAT supplies power to the RTC and the back-up registers
L2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- Conversion range: 0 to 3.6V
- Double sampling and hold function
- Temperature sensor
LDMA:
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPI, I 2 C and USART Up to 80 Fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can tolerate 5V letter number
L Debug mode
- Serial single-wire debugging (SWD) and JTAG interfaces Up to 7 timers
- Three 16-bit timers, up to four for each timer Input Capture / Output Compare / PWM or Pulse Count channels And incremental encoder inputs
- One 16-bit with dead zone control and emergency brake for motors
Control the PWM Advanced Control Timer
- Two Watchdog Timers (Standalone and Windowed)
- System time timer: 24-bit self-decrementing counter Up to 9 communication interfaces
- Up to 2 i2c interfaces (Supports SMBus / PMBus)
- Up to 3 USART interfaces (supports ISO7816 interface, LIN, IrDA interface and modem control) Up to 2 SPI interfaces (18 Mbit / s)
- CAN interface (2.0B active)
- USB 2.0 full speed interface
LCRC computing unit, 96-bit chip unique code
STM32模擬器接線

USB轉TTL模組接線

腳位定義

相關商品
-
X-NUCLEO-IDW01M1 WiFi 擴展板 SWPF01SA module STM32 Nucleo
0 滿分 5 分X-NUCLEO-IDW01M1 Wi-Fi擴展板SWPF01SA module STM32 Nucleo
Expansion Boards 用於:STM32 Nucleo 核心:ARM Cortex M3 數據匯流排寬度:32 bit 描述/功能:Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo 接口。
- 產品: Expansion Boards
- 用於: STM32 Nucleo
- 核心: ARM Cortex M3
- 數據匯流排寬度: 32 bit
- 描述/功能: Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo
- 接口類型: UART
- 最高工作溫度: + 85 C
- 最低工作溫度: – 40 C
- 系列: STM32 NUCLEO
- 評估工具: SWPF01SA
-
STM32-L053R8 Nucleo-64 開發板 | 支援 Arduino 及 ST morpho 連接 (整合 ST-LINK 偵錯器)
0 滿分 5 分STM32L053R8 Nucleo-64 是一款搭載超低功耗 ARM Cortex-M0+ 核心的開發板。支援 Arduino Uno R3 與 ST morpho 接頭,整合 ST-LINK 偵錯器,無需額外探針即可快速建立原型。
NT$846NT$700 未稅 -
RedBear DUO – Wi-Fi + BLE IoT Board 物聯網開發板 seeed
0 滿分 5 分支援 Wi-Fi 和 BLE 雙模連線;免費 Particle io 雲端服務;支援 Arduino、JavaScript 和 Python(僅限 Wi-Fi 和 BLE);Broadcom WICED SDK(Wi-Fi 和藍牙雙模);免費 Android 和 iOS 應用。
NT$886NT$790 未稅 -
STM32 Nucleo-64 MCU Development Board NUCLEO-L452RE(ARM Cortex-M4)
0 滿分 5 分NT$800 未稅NUCLEO-L452RE 開發板是由 STMicroelectronics 設計。它搭載了 ARM Cortex M4 核心,並支援 32 位元的資料匯流排寬度。採用 QFP64 封裝的微控制器,工作電源電壓支援多種模式,包括 3.3 V、5 V,以及 7 V 到 12 V。
-
STM32 Nucleo-64 (NUCLEO-F103RB):內建 ST-LINK、相容 Arduino 脚座
0 滿分 5 分NT$760 未稅這款STM32 Nucleo-64 開發板,採用STM32F103RB微控制器,提供經濟且靈活的開發平台。它支援Arduino Uno V3與ST Morpho擴展介面,並內建ST-LINK/V2-1調試器/編程器,無需額外探針。板載電源管理、LED和按鈕,且相容多種IDE,適合物聯網、嵌入式系統等原型開發。
-
ODYSSEY-STM32MP135D 內建4GB eMMC 開發板 Cortex-A7 STM32/4Gb/PoE
0 滿分 5 分ODYSSEY-STM32MP135D 採用 32 位 Arm Cortex-A7 STM32 MPU,安裝在 8.5 x 5.6 mm的機板上,使其成為用戶最方便且節省空間的選擇。 它還支援 Yocto 和 Buildroot 操作系統,為需要不同軟體選項的用戶提供靈活性。ODYSSEY 專為工業控制應用而設計,可通過允許兩個網絡端口上的備份輸入來提供線路冗餘。 這可以確保在網絡故障或中斷時數據的穩定性和安全性。
NT$1,600NT$1,360 未稅 -
Grove-Mini Track Ball 迷你軌道球 seeed
0 滿分 5 分Grove-Mini Track ball 將為您的應用提供一個實用的運動跟踪功能模組原型設計。它具有高級,快速響應的360度檢測和單點檢測功能,集成在芯片STM32F103C8T6和** AN48841B *中。也可以使用Grove接口進行標準化,這將為您在原型設計過程中節省大量工作。
NT$552NT$480 未稅 -
JLINK V9 仿真下載器 相容STM32 AMR開發 燒錄編程器
0 滿分 5 分NT$800 未稅這是一款支援MDK、IAR、DS5、KEIL等多種主流開發環境的JTAG仿真器。它能自由升級固件至7.88a及以上版本,確保與最新版開發軟體相容。支援的CPU核心包括ARM7/9/11、Cortex-A/M/R系列。
-
X-NUCLEO-IKS01A2 MEMS 及 環境傳感器擴展板
0 滿分 5 分X-Nucleo-IKS01A2 與 X-Nucleo-IKS01A1 在接口上完全一致,採用 Arduino UNO R3 接口與其他Nucleo板相連。X-Nucleo-IKS01A2採用了全新的三軸加速度計加三軸陀螺儀(A+G),三軸加速度加三軸磁力計(A+M)以及MEMS氣壓計,所有傳感器通過同一I2C接口與主控板相連。保留了DIL24socket,便於評測其他型號的傳感器。
NT$933NT$800 未稅 -
STM32 Nucleo-144 Board F429ZI 2M Flash 開發板
0 滿分 5 分NT$960 未稅STM32 Nucleo-144開發板 為用戶使用STM32F429ZIT6系列微控制器構建原型提供了一種經濟高效且靈活的方式。Zio連接器是Arduino Uno的擴展,提供對更多外圍設備的訪問,並且ST morpho標頭通過選擇Shields擴展了功能。支持多種集成開發環境(IDE),包括IAR,Keil,基於GCC和ARM mbed。

















