





24GHz Human Stationary Presence Sensor 人體存在靜止感測器 Seeed
NT$700 未稅
人體存在靜止偵測雷達感測器是一個獨立的、保護隱私的安全毫米波模組,工作頻率為 24GHz。 該模組採用增強型英飛凌多普勒雷達和標準算法,是智能家居、智能酒店和危險警報等個性化應用的理想解決方案。而且由於發射波是毫米級的,即使是遮蔽物,它也將保持功能。
尚有庫存
- 詳細資訊
商品說明
24GHz Human Stationary Presence Sensor 毫米波人體靜止存在雷達感測器模組是一款基於英飛凌毫米波 FMCW 工業雷達的獨立模組近距離感測器,工作頻率為 24GHz。該單元採用增強型多普勒雷達信號處理機制和標準算法構建,能夠區分佔用和非佔用條件,並在自適應環境中識別人類活動。它是智能家居、人體行為檢測、危險警報等個別應用中高精度、自我調節、隱私保護、安全的生物雷達系統的理想解決方案。
與傳統的 PIR 感測器相比,人體靜止存在模組對站立、移動和跌倒等人體活動具有更高的靈敏度。而且由於發射波是毫米級的,即使是遮蔽物,它也將保持功能。與 PIR 傳感器的短響應不同,該模組會持續不斷地感知人,這使得它在客廳、酒店甚至監獄中都非常有用。
該模組包含一個標準的自學習算法,它可以同時檢測,保護隱私,它可以管理不同的環境,無論位置是有點嘈雜還是非常安靜。在此之上,它大大降低了非生命物體的干擾,檢測輸出精度高達95%。
模組上內置雙陣列高性能天線,具有扇形波束模式波束寬度,水平為 90°,垂直為 60°,使其感應面積高達 96 平方米。此外,它甚至可以感知微動。該模組對環境的適應性很強,即使環境因素不同,也能保持正常運行。輸出功率非常低,即使長時間暴露也不會對人體造成傷害。
該單元支持二次開發,體積小、數字輸出、內部算法等可改進因素,通過Wio Terminal或XIAO系列等開發板使用UART通信接口可應用於多種場景應用。
產品特徵
- 可靠的技術:英飛凌毫米波 FMCW 工業雷達
- 啟用理論:將多普勒雷達技術與工作頻率為 24GHz 的近距離傳感器 (NDS) 結合使用
- 標準算法:區分佔用/未佔用條件,識別自適應環境中的人類活動
- 完善的隱私保護:提供無需身份識別的監控能力
- 靈活的安裝位置:無論遮擋物如何都能正常運行
- 無害工作狀態:輸出10dBm無害能量功率
- 精度高:減少非生命物體的干擾,輸出結果精度達到95%以上
- 高魯棒性:在包含不同溫度、濕度、噪音、氣流、灰塵、光線等的複雜環境中保持正常運行。
- 高性能天線:在水平 90°/ 垂直 60° 的扇形波束模式中感應均勻的微動
- 測量距離:
- 運動感知最大距離:最遠12米>
- 微動感知最大距離:可達5米
- 體感最大距離:最遠3米
- 檢測時間:
- 無人到有人:0.5秒內
- 有人到無人狀態:1分鐘以上
- 可定制雷達:支持雷達參數、協議、天線、功能等二次開發
注意:該產品的功耗為500mw。
技術教學
Documents
- MR24HPB1_User_Manual.pdf
- Seeed mmWave sensor series V2.0.pptx
- 24G-Radar-Fall-detection-human-3D
- Seeed Studio MMWave Sensor Case Design
教學專題
技術補充(英文)
以下為原廠英文技術說明,提供使用者參考。
Description
The mmWave Human stationary Presence Radar Sensor Module is a self-contained module near distance sensor based on Infineon mmWave FMCW industrial radar operating at 24GHz. The unit is built with the enhanced Doppler radar signal processing mechanism and standard algorithm which enables distinguishing between the occupied and unoccupied conditions and identifying human activities in a self-adaption environment. It is an ideal solution for high-accurate, self-regulation, privacy-protected, secure biotic radar systems in individual applications, such as smart home, human behave detecting, danger alarm.
Compared to the traditional PIR sensor, the Human stationary Presence Module has more sensitivity to human activities like standing, moving, and falling. And because the transmitting wave is millimetre-level, it will remain functioning even shelter block. Not like the PIR sensor short responding, the module keeps sensing people continuously which makes it quite useful during the living room, hotel, or even prison.
The module contains a standard self-learning algorithm, it can detect simultaneously, privacy-protectively, and it can manage different environments whether the location is a little noisy or extremely peaceful. Above that, it highly decreases the interference of non-living objects and the detect output is up to 95 % accuracy.
There is a two-array, high-performing antenna built on the module and it has fan-beam pattern beamwidth where the Horizontal is 90° and Vertical is 60° which makes its sensing area as high as 96m2. Additionally, it even can sense micromotion. The module is very adaptable to the environment and it can maintain proper functioning even if the environmental factors are different. The output power is very low which ensures it is harmless to the human body even in prolonged exposure.
Features
- Reliable tech: Infineon mmWave FMCW industrial radar
- Enabled theory: Apply Doppler radar technology with Near Distance Sensor(NDS) operating at 24GHz
- Standard algorithm: Distinguish occupied/unoccupied conditions and identify human activities in the self-adaption environment
- Perfect privacy protection: Provide surveillance capabilities without identification
- Flexible install location: Operate properly regardless of the shelter blocks
- Harmless working status: Output 10 dBm harmless energy power
- High accuracy: Decrease the interference of non-living objects and the output results achieve more than 95% accuracy
- High robustness: Maintain proper functioning in a complex environment containing different temperatures, humidity, noise, air currents, dust, light and so on.
- High performing antenna: Sense even micromotion in a fan-beam pattern where Horizontal90°/ Vertical60°
- Measurement distance:
- Motion perception maximum distance: up to 12 meters
- Micromotion perception maximum distance: up to 5 meters
- Body perception maximum distance: up to 3 meters
- Detecting time:
- Unoccupied to occupied status: within 0.5 seconds
- Manned to unmanned status: above 1 minute
- Customizable radar: Support secondary development including radar parameter, protocol, antenna, function
資料來源:Seeed Studio 官方技術文件,經台灣物聯科技實測整理後彙整
相關商品
-
Grove – Relay 繼電器模組 | 支援 Arduino & Raspberry Pi | 輕鬆控制高電壓電路
0 滿分 5 分Grove-Relay 模組,一個低電壓控制高電壓的數字開關。透過 5V 控制器,可輕鬆驅動高達 250V AC / 30V DC、5A 的電路,內建 LED 指示燈,使用更方便。
NT$200NT$140 未稅 -
Grove – Recorder v3.0 錄音感測器 錄音機 語音錄放模組
0 滿分 5 分Grove錄音機基於ISD9160FI 晶片,通過設定電阻值和播放週期其可記錄最長達 83秒。能夠提供單片機聲音的存儲。記錄時間可通過模組的PCB採樣電阻改變。可由板載按鍵或微控制器如 Arduino 或 Seeeduino 直接控制。
NT$500NT$400 未稅 -
Seeed Studio Grove – Flame Sensor 火焰感測器 (YG1006 / 760nm-1100nm 紅外線偵測)
0 滿分 5 分Grove – Flame Sensor 是一款專為檢測火源設計的高速、高靈敏度感測模組。核心採用 YG1006 NPN 矽光電晶體,能精準捕捉 760nm ~ 1100nm 波長範圍內的紅外輻射。黑色環氧樹脂封裝有效過濾可見光干擾,確保在複雜環境下仍能準確運作。具備標準 Grove 接口與可調靈敏度電位器,是製作消防機器人眼睛或火焰警報系統的理想元件。
NT$371NT$200 未稅 -
Seeed Grove – BLE v1 低功耗藍牙 4.0 模組 (HM-11 / TI CC2540 / 支援 iOS & Android)
0 滿分 5 分Grove – BLE (v1) 是一款高效能的低功耗藍牙 4.0 (Bluetooth Low Energy) 傳輸模組。基於工業級 HM-11 模組與 TI CC2540 晶片開發,提供穩定的 UART 串口 無線透傳功能。無需複雜配對,即可支援 Android 與 Apple (iOS) 裝置連線控制。具備標準 Grove 接口與 AT 指令集,支援 3.3V/5V 供電,非常適合用於開發智慧家居、遙控機器人與手機周邊互動專案。
NT$638NT$460 未稅 -
Seeed Grove MQ3 酒精感測器模組 高靈敏快速響應 支援 Arduino/樹莓派
0 滿分 5 分想用 Arduino 製作酒精感測器?Seeed Studio Grove – MQ3 酒精感測器具備高靈敏度與快速回應特性,檢測範圍達 0.05-10 mg/L。適用於家庭與工業氣體洩漏檢測,支援電位計調整靈敏度。台灣現貨,隨附 Grove 連接線!
NT$362NT$240 未稅 -
Seeed Grove – Sound Sensor 聲音感測器 (LM386 放大器) 支援類比訊號輸出與靈敏度調整 Arduino & 樹莓派聲控開發
0 滿分 5 分Grove – Sound Sensor 是一款基於 LM386 功率放大器與駐極體麥克風的聲音偵測模組,專門用於檢測環境中的聲音強度。模組輸出 類比電壓訊號 (Analog),聲音越大、電壓變化越大。板載電位器 (Potentiometer) 可讓使用者自行調整信號增益 (靈敏度),以適應不同的檢測環境。具備 4V-12V 寬工作電壓與標準 Grove 接口,是製作聲控開關與簡易噪音計的最佳選擇。
NT$238NT$180 未稅 -
Grove – EMG Detector 肌電圖 檢測儀 肌肉信號 傳感器/感測器 肌電檢測器
0 滿分 5 分Grove – EMG Detector 肌電圖感測器,能將肌肉收縮的電信號轉換為可被 Arduino 識別的訊號,適用於 3.3V 至 5V 的系統。 具備Grove 兼容介面、3.5mm 插頭和 6 個電極,透過其差分與零漂移放大器設計。
NT$1,486NT$1,300 未稅 -
Grove – Alcohol Sensor 酒精感測器 Seeed Studio
0 滿分 5 分Grove – Alcohol Sensor 是適用於Arduino或Seeeduino的一個完整酒精傳感器模塊。它由基於MQ303A半導體酒精傳感器。它具有良好的靈敏度可對酒精快速反應。適合做呼吸酒精測驗。該Grove具備了MQ303A的所有必要電路,如電源調節和加熱器電源。該傳感器輸出電壓與空氣中的酒精濃度成反比。
NT$286NT$220 未稅 -
Seeed Grove 數位光敏感測器 (TSL2561) I2C 介面 寬量程 40,000 LUX 支援 Arduino & 樹莓派
0 滿分 5 分Grove – Digital Light Sensor 數位型光敏感測器 是基於I2C 光度- 數位 轉換器, TSL2561 將光強度轉換為數位訊號。不同於傳統的類比式光感測器,數位光敏模組的特點是由於其雙光敏二極管,可選擇的光譜範圍:紅外線和全光譜。
NT$320NT$220 未稅 -
Grove – Wio E5 LoRaWAN 無線模組 (STM32WLE5JC) 868/915 MHz | 整合ARM Cortex-M4和SX126x
0 滿分 5 分Grove – Wio-E5 是一款高性能無線電模組,支援 LoRaWAN 協議,使用極為簡單。其核心是Wio -E5 LoRaWAN STM32WLE5JC 模組,整合了 ARM Cortex M4 超低功耗 MCU 核心和 Wio SX126x。這款全球首創的微型模組將 LoRa® RF 和 MCU 晶片整合在一起,支援多種調變方式。
NT$714NT$540 未稅




















