



XBee Pro ZB S2C low power ZigBee module 63mW 3200M 最新產品 原裝進口
NT$2,600 NT$2,200 未稅
2017 最新 XBee Pro ZB S2C low power ZigBee module 63mW 3200M 原裝進口
We now carry the Series 2 XBee “ZigBee” modules. This is the PRO Series 2 ZigBee protocol 63mW with wire antenna. Its good for point-to-point, multipoint and mesh networks. This module is a little more difficult to get going than the Series 1 – you must set up a “coordinator” module so they are not as plug-and-play. We suggest this module for those who are following the Building Wireless Sensor Network book as it focuses on Series 2.
尚有庫存
- 商品說明
商品說明
XBee Pro ZB S2C low power ZigBee module 63mW 3200M 最新產品 原裝進口
We now carry the Series 2 XBee “ZigBee” modules. This is the PRO Series 2 ZigBee protocol 63mW with wire antenna. Its good for point-to-point, multipoint and mesh networks. This module is a little more difficult to get going than the Series 1 – you must set up a “coordinator” module so they are not as plug-and-play. We suggest this module for those who are following the Building Wireless Sensor Network book as it focuses on Series 2.
Series 2 modules cannot talk to Series 1 modules so if you already have some S1 type XBees you may want to stick with them. The S2 modules are not necessarily ‘better’ than S1 for many projects. They’re just different as they use the “ZigBee” wireless stack instead of the 802.15.4. This makes them better for low power usage and advanced users who want a mesh topology (many XBees in a spread-out configuration) – but they are more difficult to use for basic point-to-point setups.
The pins on an XBee are 2mm spacing, not 0.1″ so they will not fit into a breadboard. For that reason, they work best in our XBee adapter module kit (which has a 250mA 3.3V regulator) or with the USB XBee adapter.
This module comes with a wire antenna, its the same price as a chip antenna but 50% more range because of the improved antenna, awesome!
- Frequency: 2.4 GHz
- Range: 2 mile
- Data Rate: 250 kbps
- Sensitivity: – 101 dBm
- Operating Supply Voltage: 2.7 V to 3.6 V
- Supply Current Transmitting: 120 mA
- Supply Current Receiving: 31 mA
- Output Power: 63 mW
- Maximum Operating Temperature: + 85 C
- Antenna Connector Type: Wire
- Brand: Digi International
- Dimensions: 3.294 cm x 2.438 cm
- Interface Type: SPI, UART
Details:
- TX Peak Current: 205mA
- RX Current: 47 mA (@3.3 V)
- Power-down Current: < 3.5 μA
- Indoor/Urban: up to 300 ft (90 m)
- Outdoor line-of-sight: up to 2 miles (3200 m)
- Transmit Power: 63mW (18dBm)
- Receiver Sensitivity: -102 dBm
This handy chart from Digi shows the differences between all of the different XBees in the family
Mechanical Diagram for XBees
Spec sheet about Series 2 XBees
相關商品
-
XBee ZB S2C low power ZigBee module w/ integrated wire antenna 最新產品 原裝進口
0 滿分 5 分XBee ZB S2C low power ZigBee module w/ integrated wire antenna 原裝進口
Digi International XBee® & XBee-PRO® ZB ZigBee® RF Modules provide cost-effective wireless connectivity to devices in ZigBee mesh networks. They are interoperable with other ZigBee and ZigBee PRO feature set devices. These modules require no configuration or additional development; users can have their network up and running in a matter of minutes. Programmable versions of the XBee-PRO ZB ZigBee and the SMT ZigBee modules make customizing ZigBee applications easy, even without wireless design expertise.
-
2.4G zigbee CC2530 DL-22 無線串口收發模組 CC2530 數據透傳 支援點對點廣播模式 TTL 1000米長距離,附天線
0 滿分 5 分NT$505NT$380 未稅 -
家庭助理 SkyConnect USB 記憶棒-支援 Zigbee/Thread/Matter 居家自動化集成隨身碟
0 滿分 5 分Home Assistant SkyConnect 記憶棒 是一種物理無線電適配器/加密狗裝置,用於完美匹配 Home Assistant 用戶。 它相容多協議(Zigbee/Thread/Matter)並提供一致的無線 (OTW) 固件更新,為家庭自動化集成提供適合初學者的體驗。
-
XBee Sensor Shield 感測器擴展板 帶 XBee/ RS485 接口
0 滿分 5 分NT$305NT$280 未稅 -
XBEE Adapter USB 轉 TTL / FT232RL晶片 FTDI 下載器 附傳輸線
0 滿分 5 分PC通過USB線直接與XBee適配器連接,方便XBee 模組進行配置或設定與傳輸使用。
NT$190NT$160 未稅 -
XBee Explorer Dongle sparkfun 原廠
0 滿分 5 分This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
NT$933NT$840 未稅 -
2.4G zigbee CC2530 無線串口收發模組 DL-20 250米長距離
0 滿分 5 分2.4G zigbee CC2530 無線串口收發模組 CC2530 數據透傳 支援點對點廣播模式 TTL
本模組可以實現串口資料透傳,使用它就像使用一個串口模組一樣簡單。你無需瞭解複雜的ZigBee協定,卻擁有ZigBee網路的優勢。
- TI CC2530 完全相容符合2.4G IEEE 802.15.45之規範
- TI CC2530 完全符合ZigBee PRO(ZigBee 2007)協議規範
- 支援 UART 串口介面
NT$476NT$300 未稅 -
Leonardo 開發板 含 Xbee插座 (Arduino 兼容) DFRobot
0 滿分 5 分是基於Arduino的原設計基礎上增加1個xbee接口,節省一個Xbee擴展板,只要2個控制器加2個xbee即可無線通訊。
NT$810NT$640 未稅 -
Xbee Shield Pro V03 Xbee擴展板 相容Arduino 藍芽 Bluetooh
0 滿分 5 分注意:出貨商品不含開發板跟XBEE模組
NT$190NT$180 未稅 -
XBee PRO XSC S3B, 900MHz, 250mW, wire antenna, 9600 bps
0 滿分 5 分XBee PRO XSC S3B 無線傳輸模組 900 MHz, 250 mW, wire antenna, 9600 bps XBP9B-XCWT-001
Do you need ‘moar power’ for your wireless widget? The XBee-PRO XSC 900 MHz RF module features two times the throughput and 20 times less current draw than the previous XSC module. This version (S3B) features an ADF7023 transceiver from Analog Devices, which can toss your data up to 28 miles Line-of-Sight (LOS), along with low power consumption, drawing less than 2.5 uA in power down.