Wifi Shield V2.0 Arduino/ Seeeduino 無線網路 wifi 擴展板 seeed原廠
NT$1,762 NT$1,420 未稅
尚有庫存
- 商品說明
商品說明
Wifi Shield V2.0 Arduino 無線網路 wifi 擴展板
WiFi Shield V2.0擴展板配置RN171 TCP/IP無線模組,可讓Arduino / Seeeduino連接高達802.11b / g的無線網絡。 RN171無線模組支持TCP,UDP,FTP和HTTP通信協議,可以滿足大多數無線和物聯網(IoT)網絡項目的需求,例如智能家居網絡,機器人控件和個人氣象站。
屏蔽層覆蓋範圍廣,並通過新的穩定的車載天線傳輸強信號。 Arduino的默認通信協議是UART / Serial,您可以通過我們合併的兩根跳線選擇用於RX和TX的數字引腳(D0至D7)。 屏蔽層還具有兩個I2C和串行的Grove連接器,以使其可以與任何其他Groves一起插入。
特徵
- 帶有分步教程的各種演示
- 低功耗
- 與Arduino兼容,易於上手
- CMD支持
規格
- 外型尺寸:100毫米x65毫米x30毫米
- 重量:毛重41g
- 電池:排除
- 電壓:3.3〜5.5伏
- 當前:25〜400毫安
- 發射功率:0-10 dBm
- 頻率:2402〜2480 MHz
- 接口:UART(軟件串行,可以將數字引腳選擇為RN171的RX和TX)
- 網路速率:802.11b為1-11 Mbps 802.11g為6-54Mbps
- 安全的WiFi身份驗證:WEP-128,WPA-PSK(TKIP),WPA2-PSK(AES)
- 內置網絡應用:DHCP客戶端,DNS客戶端,ARP,ICMP ping,FTP,TELNET,HTTP,UDP,TCP
- RN-171:WIFLY GSX 802.11 b / g無線局域網模塊。
出貨清單
- Wifi Shield V2.0 x1
Documents
- [Wiki] Wifi Shield V2.0
- WiFi Shield V2.0 Eagle Files
- Schematic PDF
- RN-171 Datasheet
- Wifi Shield Library
- WiFi Module User Manual — This is where you’ll find all the commands for the RN-171 module in the shield.
- What is a Seeeduino
- w3schools Great website to learn HTML, Javascript, and JQuery
Wifi Shield V2.0
Featured with RN171 TCP/IP module, the WiFi shield allows your Arduino/Seeeduino to connect wireless networks up to 802.11b/g. The RN171 module supports TCP, UDP, FTP and HTTP communication protocols, which meet the needs of most wireless and Internet of Things (IoT) network projects, such as smart home networks, robots controls and personal weather stations.
The shield covers a wide range and transmit strong signals with the newly, stable on-board antenna. The default communication protocol with the Arduino is UART/Serial, and you can select which digital pins (D0 to D7) to use for RX and TX with the two jumper rows we’ve incorporated. The shield also has two Grove connectors of I2C and Serial to make it can be plugged with any other Groves.
The shield is well documented with demos and you can check the User Manual here online.
Features
- Various demos with step-by-step tutorials
- Low power consumption
- Compatible with Arduino, easy to get started with
- CMD Support
Technical details
Dimensions | 100mm x65mm x30mm |
Weight | G.W 41g |
Battery | Exclude |
Voltage | 3.3~5.5 V |
Current | 25~400mA |
Transmit power | 0-10 dBm |
Frequency | 2402~2480 MHz |
Interface | UART (Software serial, you can choose the digital pins as RX and TX of RN171) |
Network rate | 1-11 Mbps for 802.11b/6-54Mbps for 802.11g |
Secure WiFi authentication | WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES) |
Built-in networking applications | DHCP client, DNS client, ARP, ICMP ping, FTP, TELNET, HTTP, UDP, TCP |
RN-171 | WIFLY GSX 802.11 b/g Wireless LAN Module. |
相關商品
-
Grove – Sound Sensor 聲音感測器 seeed原廠
0 滿分 5 分聲音感測模組是一個麥克風元件,它可以用於檢測偵測環境中的聲音強度。而偵測到的資料輸出的值可以由電位進行調整。
NT$238NT$180 未稅加入購物車Quick View -
Grove – PIR Motion Sensor 紅外線人體移動探測感測器 seeed原廠
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – Air quality sensor v1.3 空氣品質感測器模組 seeed原廠
0 滿分 5 分主要可以監測的氣體是一氧化碳,醇,丙酮,稀釋劑,甲醛等輕微毒性氣體。本模組兼容 5V和3.3V電源。
NT$457NT$300 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Multichannel Gas Sensor v2 多通道有害氣體感測器 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove – Piezo Vibration Sensor MEAS 壓電式 振動 感測器 震動傳感器 seeed原廠
0 滿分 5 分主要用於汽車防盜報警器、臥式滾筒洗衣機振動不平衡及其他要求安靜、小噪音的家用電器如空調及電廣靶鏢記分等 振動 信號的檢測,也可以用於記數器的觸發器做為柔性開關、脈膊檢測、聲納測量等等。
NT$267NT$220 未稅加入購物車Quick View -
Grove – Flame Sensor 火焰感測器 seeed原廠
0 滿分 5 分NT$371NT$200 未稅加入購物車Quick View -
Grove – UV Sensor UV 紫外線感測器 seeed原廠
0 滿分 5 分NT$457NT$300 未稅加入購物車Quick View -
Grove – Recorder v3.0 錄音感測器 錄音機 語音錄放模組 seeed原廠
0 滿分 5 分NT$733NT$560 未稅加入購物車Quick View -
Grove – GSR Sensor 測謊器 皮膚電阻感測器 流汗感測器 seeed原廠
0 滿分 5 分NT$433NT$320 未稅加入購物車Quick View