



STM32F103C8T6 小系統板 單片機 核心板 STM32開發板 ARM
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
- 詳細資訊
商品說明
STM32F103C8T6 小系統板 單片機 核心板
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Lclock, reset and power management
- 2.0 to 3.6 V supply and I / O pins
- Power on / off reset (POR / PDR), programmable voltage monitoring(PVD)
- 4 ~ 16MHz crystal oscillator
- Built-in factory-calibrated 8MHz RC oscillator
- Built-in calibrated 40kHz RC oscillator
- PLL that generates the CPU clock
- 32 kHz RTC oscillator with calibration function
Low power consumption
- Sleep, Standby and Standby modes
- V BAT supplies power to the RTC and the back-up registers
L2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- Conversion range: 0 to 3.6V
- Double sampling and hold function
- Temperature sensor
LDMA:
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPI, I 2 C and USART Up to 80 Fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can tolerate 5V letter number
L Debug mode
- Serial single-wire debugging (SWD) and JTAG interfaces Up to 7 timers
- Three 16-bit timers, up to four for each timer Input Capture / Output Compare / PWM or Pulse Count channels And incremental encoder inputs
- One 16-bit with dead zone control and emergency brake for motors
Control the PWM Advanced Control Timer
- Two Watchdog Timers (Standalone and Windowed)
- System time timer: 24-bit self-decrementing counter Up to 9 communication interfaces
- Up to 2 i2c interfaces (Supports SMBus / PMBus)
- Up to 3 USART interfaces (supports ISO7816 interface, LIN, IrDA interface and modem control) Up to 2 SPI interfaces (18 Mbit / s)
- CAN interface (2.0B active)
- USB 2.0 full speed interface
LCRC computing unit, 96-bit chip unique code
STM32模擬器接線

USB轉TTL模組接線

腳位定義

相關商品
-
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A4是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模組SPSGRF-868,該模組工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,方便用戶在不同MCU系列中進行程序移植。
-
X-NUCLEO-IDW01M1 WiFi 擴展板 SWPF01SA module STM32 Nucleo
0 滿分 5 分X-NUCLEO-IDW01M1 Wi-Fi擴展板SWPF01SA module STM32 Nucleo
Expansion Boards 用於:STM32 Nucleo 核心:ARM Cortex M3 數據匯流排寬度:32 bit 描述/功能:Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo 接口。
- 產品: Expansion Boards
- 用於: STM32 Nucleo
- 核心: ARM Cortex M3
- 數據匯流排寬度: 32 bit
- 描述/功能: Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo
- 接口類型: UART
- 最高工作溫度: + 85 C
- 最低工作溫度: – 40 C
- 系列: STM32 NUCLEO
- 評估工具: SWPF01SA
-
X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A5 評估板基於 SPIRIT1 射頻模組 SPSGRF-915,可用於擴展 STM32 Nucleo 開發板。 SPSGRF-915 模組工作於 915 MHz ISM 頻段,並通過 FCC 認證(FCC ID:S9NSPSGRF)和 IC 認證(IC:8976C-SPSGRF)。 X-NUCLEO-IDS01Ax(x= 4 或 5)的工作頻率透過兩個電阻(R14 和 R15)來辨識。它與 ST Morpho 和 Arduino UNO R3 連接器佈局相容。
NT$848NT$700 未稅 -
STM32-L053R8 Nucleo-64 開發板 | 支援 Arduino 及 ST morpho 連接 (整合 ST-LINK 偵錯器)
0 滿分 5 分STM32L053R8 Nucleo-64 是一款搭載超低功耗 ARM Cortex-M0+ 核心的開發板。支援 Arduino Uno R3 與 ST morpho 接頭,整合 ST-LINK 偵錯器,無需額外探針即可快速建立原型。
NT$846NT$700 未稅 -
NUCLEO-F411RE STM32F411RE Mbed 開發板 原裝意法半導體進口 Arduino 相容腳座
0 滿分 5 分STM32 Nucleo-64開發板採用STM32F411RE MCU,支持Arduino和ST形態連接。STM32 Nucleo板為用戶提供了一種經濟實惠且靈活的方式,可以從STM32微控制器中嘗試新的概念並構建原型,從性能,功耗和功能的各種組合中進行選擇。Arduino™Uno V3連接支持和ST morpho頭部允許輕鬆擴展STM32 Nucleo開放平台的功能
NT$740NT$660 未稅 -
STM32 Nucleo-144 MCU / NUCLEO-F767ZI 開發板
0 滿分 5 分NT$1,200 未稅STM32 Nucleo-144 NUCLEO-F767ZI 為使用者提供了一種經濟實惠且靈活的方式,讓他們可以從 STM32 微控制器提供的各種性能和功耗特性組合中進行選擇,從而嘗試新概念並建立原型。對於相容板,內部或外部 SMPS 顯著降低了運作模式下的功耗。
-
STM32F411CEU6 高配版開發板 | 100MHz 效能、512KB 大容量 | 支援 MicroPython
0 滿分 5 分升級版 STM32F411CEU6 開發板,主頻提升至 100MHz 並具備 512KB 大容量 Flash。完全相容 F401 腳位,支援 Type-C DFU 燒錄與 MicroPython。高效能、低功耗,是進階嵌入式開發與機器人控制的首選核心板。
NT$190NT$180 未稅 -
JLINK V9 仿真下載器 相容STM32 AMR開發 燒錄編程器
0 滿分 5 分NT$800 未稅這是一款支援MDK、IAR、DS5、KEIL等多種主流開發環境的JTAG仿真器。它能自由升級固件至7.88a及以上版本,確保與最新版開發軟體相容。支援的CPU核心包括ARM7/9/11、Cortex-A/M/R系列。
-
X-NUCLEO-IKS01A2 MEMS 及 環境傳感器擴展板
0 滿分 5 分X-Nucleo-IKS01A2 與 X-Nucleo-IKS01A1 在接口上完全一致,採用 Arduino UNO R3 接口與其他Nucleo板相連。X-Nucleo-IKS01A2採用了全新的三軸加速度計加三軸陀螺儀(A+G),三軸加速度加三軸磁力計(A+M)以及MEMS氣壓計,所有傳感器通過同一I2C接口與主控板相連。保留了DIL24socket,便於評測其他型號的傳感器。
NT$933NT$800 未稅 -
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
0 滿分 5 分NT$800 未稅STM32 Nucleo 開發板 為使用者提供了一個經濟實惠且靈活的平台,可以嘗試新想法,並使用任何 STM32 微控制器系列來建立原型,從中選擇各種性能、功耗和功能的組合。由於支援 Arduino™ 連接功能和 ST Morpho 接頭,使用者可以透過多種專業擴充板輕鬆擴展 STM32 Nucleo 開放式開發平台的功能。















