



STM32F103C8T6 小系統板 單片機 核心板 STM32開發板 ARM
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
- 詳細資訊
商品說明
STM32F103C8T6 小系統板 單片機 核心板
Core: ARM 32-bit Cortex ™ -M3 CPU
- Up to 72MHz operating frequency
- Single cycle multiplication and hardware division
memory
- from 64K or 128K bytes of Flash program memory
- up to 20K bytes of SRAM
Lclock, reset and power management
- 2.0 to 3.6 V supply and I / O pins
- Power on / off reset (POR / PDR), programmable voltage monitoring(PVD)
- 4 ~ 16MHz crystal oscillator
- Built-in factory-calibrated 8MHz RC oscillator
- Built-in calibrated 40kHz RC oscillator
- PLL that generates the CPU clock
- 32 kHz RTC oscillator with calibration function
Low power consumption
- Sleep, Standby and Standby modes
- V BAT supplies power to the RTC and the back-up registers
L2 12-bit analog-to-digital converters, 1us conversion time (up to 16)
- Conversion range: 0 to 3.6V
- Double sampling and hold function
- Temperature sensor
LDMA:
- 7-channel DMA controller
- Peripherals supported: timers, ADC, SPI, I 2 C and USART Up to 80 Fast I / O ports
- 26/37/51/80 I / O ports, all I / O ports can be mapped to 16 external interrupts; almost all ports can tolerate 5V letter number
L Debug mode
- Serial single-wire debugging (SWD) and JTAG interfaces Up to 7 timers
- Three 16-bit timers, up to four for each timer Input Capture / Output Compare / PWM or Pulse Count channels And incremental encoder inputs
- One 16-bit with dead zone control and emergency brake for motors
Control the PWM Advanced Control Timer
- Two Watchdog Timers (Standalone and Windowed)
- System time timer: 24-bit self-decrementing counter Up to 9 communication interfaces
- Up to 2 i2c interfaces (Supports SMBus / PMBus)
- Up to 3 USART interfaces (supports ISO7816 interface, LIN, IrDA interface and modem control) Up to 2 SPI interfaces (18 Mbit / s)
- CAN interface (2.0B active)
- USB 2.0 full speed interface
LCRC computing unit, 96-bit chip unique code
STM32模擬器接線

USB轉TTL模組接線

腳位定義

相關商品
-
X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A5 評估板基於 SPIRIT1 射頻模組 SPSGRF-915,可用於擴展 STM32 Nucleo 開發板。 SPSGRF-915 模組工作於 915 MHz ISM 頻段,並通過 FCC 認證(FCC ID:S9NSPSGRF)和 IC 認證(IC:8976C-SPSGRF)。 X-NUCLEO-IDS01Ax(x= 4 或 5)的工作頻率透過兩個電阻(R14 和 R15)來辨識。它與 ST Morpho 和 Arduino UNO R3 連接器佈局相容。
NT$848NT$700 未稅 -
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A4是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模組SPSGRF-868,該模組工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,方便用戶在不同MCU系列中進行程序移植。
-
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
0 滿分 5 分NT$800 未稅STM32 Nucleo 開發板 為使用者提供了一個經濟實惠且靈活的平台,可以嘗試新想法,並使用任何 STM32 微控制器系列來建立原型,從中選擇各種性能、功耗和功能的組合。由於支援 Arduino™ 連接功能和 ST Morpho 接頭,使用者可以透過多種專業擴充板輕鬆擴展 STM32 Nucleo 開放式開發平台的功能。
-
JLINK V9 仿真下載器 相容STM32 AMR開發 燒錄編程器
0 滿分 5 分NT$800 未稅這是一款支援MDK、IAR、DS5、KEIL等多種主流開發環境的JTAG仿真器。它能自由升級固件至7.88a及以上版本,確保與最新版開發軟體相容。支援的CPU核心包括ARM7/9/11、Cortex-A/M/R系列。
-
STM32 Nucleo-64 (NUCLEO-F103RB):內建 ST-LINK、相容 Arduino 脚座
0 滿分 5 分NT$760 未稅這款STM32 Nucleo-64 開發板,採用STM32F103RB微控制器,提供經濟且靈活的開發平台。它支援Arduino Uno V3與ST Morpho擴展介面,並內建ST-LINK/V2-1調試器/編程器,無需額外探針。板載電源管理、LED和按鈕,且相容多種IDE,適合物聯網、嵌入式系統等原型開發。
-
STM32F401RCT6 開發板 (Black Pill) | 支援 MicroPython|相容 F401CCU6 已焊排針
0 滿分 5 分新版 STM32F401RCT6 開發板採用 Cortex-M4 核心,主頻達 84MHz。完全相容舊版 STM32F401CCU6 腳位與程式,僅晶片封裝升級。支援 Type-C 介面、DFU 模式與 MicroPython 開發。內建多種進入 Bootloader 燒錄方式,是取代 Arduino 及進行物聯網開發的 CP 值首選解決方案。
NT$300NT$140 未稅 -
STM32 Nucleo-64 MCU Development Board NUCLEO-L452RE(ARM Cortex-M4)
0 滿分 5 分NT$800 未稅NUCLEO-L452RE 開發板是由 STMicroelectronics 設計。它搭載了 ARM Cortex M4 核心,並支援 32 位元的資料匯流排寬度。採用 QFP64 封裝的微控制器,工作電源電壓支援多種模式,包括 3.3 V、5 V,以及 7 V 到 12 V。
-
STMicroelectronics NUCLEO-F413ZH 開發板
0 滿分 5 分NT$1,600 未稅STMicroelectronics 的 NUCLEO-F413ZH 是 STM32 Nucleo-144 板。該板為用戶提供了一種經濟實惠且靈活的方式,可以使用STM32微控制器嘗試新概念和構建原型,從性能,功耗和功能的各種組合中進行選擇。
-
STM32 Nucleo-144 Board F429ZI 2M Flash 開發板
0 滿分 5 分NT$960 未稅STM32 Nucleo-144開發板 為用戶使用STM32F429ZIT6系列微控制器構建原型提供了一種經濟高效且靈活的方式。Zio連接器是Arduino Uno的擴展,提供對更多外圍設備的訪問,並且ST morpho標頭通過選擇Shields擴展了功能。支持多種集成開發環境(IDE),包括IAR,Keil,基於GCC和ARM mbed。
-
NUCLEO-L476RG STM32 開發板 Arduino 相容腳座
0 滿分 5 分NT$760 未稅STMicroelectronics NUCLEO-L476RG STM32開發板設計用於基於高性能Arm®Cortex®-M432位RISC內核的STM32L476RGT6超低功耗MCU的評估。板上顯示了STM32微控制器提供的性能和功耗功能的各種組合。開發板提供Arduino™Uno V3連接支持。














