- 商品說明
商品說明
Gravity: 投入式 液位感測器 傳感器 液位監測
投入式 液位感測器 採用高性能的感壓芯片,配合先進的電路處理和溫度補償技術,在不同深度下傳感器受到的壓力不同,不同壓力轉化為對應數值的電流信號輸出,從而達到對液位深度的測量。
本產品採用不銹鋼外殼隔離防腐,可直接投入被測液體中,從水、油到粘度較大的糊狀物都可以進行高精度的測量。無論是在河水、水庫液位測量,還是在供水液位監測、城市地下水位監測、水處理池上都有良好的使用效果。
本產品搭配了Gravity:電流轉電壓模塊(4~20mA),該模塊將傳感器的電流信號轉換為電壓信號供Arduino或其他控制器讀取,此產品應用於水廠、煉油廠、污水處理廠、建材、輕工、機械等工業領域,實現對液體的測量。
1.請完全按照連接說明連接電源。
2.本產品屬於精密設備,因此不允許拆卸或撞擊設備或使設備從高處掉落,更不要使用任何尖銳物體觸碰設備,以免造成設備損壞。
3.將變送器上電然後就可以使用了。但預熱30分鐘後,它可以提供更穩定的輸出。如果在使用過程中發現任何異常,請關閉電源並停止使用。
連接圖
引腳說明
|
|
||||||||||||||||||
|
|
規格
- 線長: 5m
- 量程: 0-5m
- 綜合精度: 0.5%
- 輸出信號: 4-20mA
- 工作電壓: 12-36V
- 工作溫度: -20-70℃
- 過載能力: 300%
- 壽命: 1*10^8壓力循環(25℃)
- 膜片殼體材質: 316L不銹鋼
- 防護等級: IP68
出貨清單
- 投入式 液位感測器 x1
- Gravity: 模擬電流電壓轉換器(適用於4~20mA應用) x1
Documents
=========================================================
Gravity: Throw-in Type Liquid Level Transmitter
This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology. The level transmitter receives different pressures at different depths of liquid, which can be converted into corresponding current signals and output through the sensor. In this way, the depth of liquid can be measured.The shell of the transmitter is made of stainless steel, anti-corrosion and easy to clean. It can be directly placed in the liquid like water, oil or even mash with large viscosity. This product can provide a steady performance in all sorts of measurement conditions such as river, reservoir, city water supply, groundwater in urban, and basin.
We sold this product together with our Gravity: Analog Current to Voltage Converter. The converter can convert current into voltage signal which can be read by your Arduino controllers or other controllers. The throw-in type liquid level transmitter can be used in waterworks, refinery, sewage disposal work, construction, light industry, mechanical and so on.
Notes:
1. Please connect the power supply exactly as the connection instruction.
2. The product is a precision device, so it is not allowed to disassemble and crash the device or make it fall from the high place, what’s more, don’t touch its diaphragm with any sharp objects in case of causing device damage.
3. Power the transmitter up then you can use it. But it can provide more steady output after preheating for 30 minutes. Please turn off the power and stop using if any abnormality is found during use.
4. The liquid level lead should be vertically downward. Please prevent water from entering the terminal, and the joint is required to be waterproof.
5. Place the liquid level probe in water, try to fix it and keep it away from the inlet.
Connection Diagram
Dimension Diagram
SPECIFICATION
- Cable Length: 5m
- Measuring Range: 0-5m
- Accuracy: 0.5%
- Output Signal: 4-20mA
- Operating Voltage: 12-36V
- Operating Temperature: -20℃-70℃
- Overload Capacity: 300%
- Service Life: 1*10^8 Pressure Circulation (25℃)
- Material: 316L stainless steel
- Protection Class: IP68
DOCUMENTS
SHIPPING LIST
- Throw-in Type Liquid Level Transmitter x1
- Gravity: Analog Current to Voltage Converter(for 4~20mA Application) (SEN0262) x1
相關商品
-
FlexiForce 壓力感測器 – 1磅 SparkFun原廠
0 滿分 5 分
NT$781NT$740 未稅加入購物車Quick View -
ESP8266 串口 WIFI模組 遠距離 無線模組 ESP-07
0 滿分 5 分半孔貼片工藝,所有IO引出,帶金屬屏蔽殼,可過FCC CE認證,可外接IPX天線,也可用內置陶瓷天線
NT$143NT$100 未稅加入購物車Quick View -
加入購物車Quick View
HC-05 串口藍牙模組 (帶底板) 主機/從機可設定 / 帶底板,附 Arduino 範例
0 滿分 5 分請勿將電源接到信號腳上,會直接燒壞模組!
藍牙透傳模組只有4個AT指令,分別是測試通訊,改名稱,改串列傳輸速率,改配對密碼,AT指令必須從TXD,RXD信號腳設置,不能通過藍牙通道設置。發送AT指令的設備可以是各種類型的MCU(比如51,avr,pic,msp430,arm等),也可以是電腦通過串口(PC串口接MAX232以後或者USB轉串口)發送。
加入購物車Quick View -
Grove – 3-Axis Analog Accelerometer 3軸加速度計 seeed原廠
0 滿分 5 分ADXL335 是一款小巧,薄型,低功耗,完整的3軸加速度計,具有信號調理電壓輸出。 該產品可測量加速度,最小滿量程範圍為±3 g。
NT$476NT$380 未稅加入購物車Quick View -
Grove – Alcohol Sensor 酒精感測器 seeed原廠
0 滿分 5 分酒精感測器(傳感器)為酒精專用檢測半導體傳感器。它具有良好的靈敏度和回應速度快的特性,本模組適用用於開發便攜式酒精檢測系統。
NT$286NT$220 未稅加入購物車Quick View -
GY-530 VL53LDK 激光測距感測器 ToF測距 飛行時間測距
0 滿分 5 分鐳射測距智慧感測器,新的智慧感測器基於成功的FlightSense™技術,實現更快、更遠、更精確的測距功能,大幅提升手機和平板電腦的拍照性能,為智慧型機器人、用戶檢測、無人機、物聯網和穿戴式裝置市場開拓新的應用機會
NT$362NT$190 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Gravity: Analog Turbidity Sensor 水濁度感測器 水質檢測 養殖環境監測 For Arduino DFRobot原廠
0 滿分 5 分濁度感測器利用光學原理,通過測量溶液中的透光率和散射率來綜合判斷溶液濁度情況,從而達到檢測水質的目的。
NT$648NT$500 未稅加入購物車Quick View -
Grove – Air quality sensor v1.3 空氣品質感測器模組 seeed原廠
0 滿分 5 分主要可以監測的氣體是一氧化碳,醇,丙酮,稀釋劑,甲醛等輕微毒性氣體。本模組兼容 5V和3.3V電源。
NT$457NT$300 未稅加入購物車Quick View -
Analog pH Meter Pro Sensor 模擬檢測 PH值(專業版) 相容Arduino DFRobot原廠
0 滿分 5 分NT$2,667NT$2,460 未稅加入購物車Quick View