Arduino Pro Mini 328 – 5V/16MHz SparkFun原廠
NT$400 NT$360 未稅
尚有庫存
- 商品說明
商品說明
Arduino Pro Mini 328 – 5V/16MHz
這是Arduino Pro Mini!是SparkFun的最小設計。這是一個運行16MHz Bootloader的5V Arduino。Arduino Pro Mini沒有安裝連接器,因此您可以使用任何方向焊接任何連接器或電線。我們建議Arduino用戶第一次使用Uno R3。這是一個很棒的電路板,可以幫助您快速啟動和運行。Arduino Pro系列適用於了解系統電壓(5V),連接器缺失和USB板外的局限性的用戶。
我們使用了所有SMD組件,使其成為兩層等。該板直接連接到FTDI Basic Breakout板並支持自動復位。Arduino Pro Mini也可以使用FTDI電纜,但FTDI電纜不會帶出DTR引腳,因此自動復位功能不起作用。板上有一個電壓調節器,因此它可以接受高達12VDC的電壓。如果您向電路板提供未經穩壓的電源,請務必連接到“RAW”引腳而不是VCC。
該板的最新版本突破了ADC6和ADC7引腳,並增加了可選I2C上拉電阻的佔位面積!
特徵
- ATmega328以16MHz運行,帶外部諧振器(0.5%容差)
- 0.8mm薄PCB
- USB連接板外
- 支持自動重置
- 5V穩壓器
- 最大150mA輸出
- 過流保護
- 重量不到2克!
- 直流輸入5V高達12V
- 板載電源和狀態LED
- 模擬引腳:8
- 數字I / O:14
- 0.7×1.3英寸(18×33毫米)
Documents
=========================================================
Arduino Pro Mini 328 – 5V/16MHz
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.
We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin and not VCC.
The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.
Features
- ATmega328 running at 16MHz with external resonator (0.5% tolerance)
- 0.8mm Thin PCB
- USB connection off board
- Supports auto-reset
- 5V regulator
- Max 150mA output
- Over current protected
- Weighs less than 2 grams!
- DC input 5V up to 12V
- On board Power and Status LEDs
- Analog Pins: 8
- Digital I/Os: 14
- 0.7×1.3″ (18x33mm)
Documents
相關商品
-
Teensy Prop Shield 開發板 SparkFun原廠
0 滿分 5 分Teensy Pro Shield用在小型手持或穿戴裝置上製作互動式燈光和音效。板子內建10DoF(自由度)運動感測器,2W音頻放大器,跟高速5V緩衝器以及8MB快閃記憶體。
NT$1,219NT$1,060 未稅加入購物車Quick View -
加入購物車Quick View
美國官方授權經銷 Arduino ETHERNET SHIELD 2 乙太網路擴展板 2代 不含POE模組 義大利製
0 滿分 5 分義大利原廠 Arduino 乙太網路擴展板 2代 不含POE模組
Arduino Ethernet Shield 2 connects your Arduino board to the internet.
Plug The Arduino Ethernet Shield 2 module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. The Shield has a Power over Ethernet (PoE) module designed to extract power from a conventional Ethernet cable.
加入購物車Quick View -
UNO Rev3 副廠開發板 通過美國FCC認證 相容Arduino 環保材質 附1.3m長傳輸線
0 滿分 5 分- 通過美國FCC認證
- 使用全新Atmega 16U2 晶片替代 8U2.意味著更高的傳輸速率和memory.
- 在Mac和Linux系統中無需安裝驅動。(在windows系統中需要Arduino IDE驅動)
- 增加了 SDA and SCL 介面
NT$400NT$380 未稅加入購物車Quick View -
Seeeduino V4.2 將Arduino UNO R3+Grove接口整合成一塊開發板 送傳輸線
0 滿分 5 分Seeeduino V4.2是一款兼容Arduino的主板,基於ATmga328P MCU。可以通過micro-USB電纜對開發板進行編程。三個板載Grove接口可以使您的電路板輕鬆連接到Grove模塊。想要做一些很棒的東西,只需要一個Seeeduino v4.2,一些Grove模塊就夠了
NT$400NT$320 未稅加入購物車Quick View -
加入購物車Quick View
DFRduino UNO R3 開發板 DFRobot原廠 附贈1.3m長傳輸線
0 滿分 5 分Uno R3是基於ATmega328P 的單片機開發板。該開發板由14路數字輸入/輸出引腳(其中6路可以用作PWM輸出)、 6路模擬輸入、1個16MHz的石英晶體振盪器、一個USB接口、1個電源接頭、1個ICSP數據頭以及1個複位按鈕組成。Uno包含了單片機運行所需的所有要素,只需用USB連接線將其連接到計算機,或利用AC-DC適配器或電池供電後即可啟動。Uno的特色在於將ATmega16U2編程為一個USB-to-serial轉換器,以便能簡單、輕鬆和自由地安裝驅動程序。
加入購物車Quick View -
Pro Micro – 3.3V/8MHz 開發板 SparkFun原廠
0 滿分 5 分Pro Micro與Pro Mini相似,除了板載ATmega32U4。 32U4內部的USB收發器使我們能夠在板上添加USB連接,並消除笨重的外部USB接口。
NT$810NT$680 未稅加入購物車Quick View -
加入購物車Quick View
MEGA 2560 R3 副廠開發板 ATMega16U2 採用原廠晶片 通過美國FCC認證 送1.3m長傳輸線
0 滿分 5 分採用全新原廠晶片及國際標準環保材質生產製造,通過美國FCC認證
加入購物車Quick View -
加入購物車Quick View
美國官方授權經銷 Arduino Leonardo 含底殼 Arduino 義大利製
0 滿分 5 分Arduino Leonardo 開發板 是一款基於ATmega32u4( 下載 )的 微控制器板。它有20個數字輸入/輸出引腳(其中7個可用作PWM輸出,12個可用作模擬輸入)、1個16 MHz晶體振盪器、1個micro USB連接、1個電源插座、1個ICSP頭和1個複位按鈕。它包含了支持微控制器所需的一切;只需通過USB電纜將其連至計算機或者通過AC-DC適配器或電池為其供電即可開始。
加入購物車Quick View -
Pro Micro – 5V/16MHz 開發板 SparkFun原廠
0 滿分 5 分Pro Micro與Pro Mini相似,除了板載ATmega32U4。 32U4內部的USB收發器使我們能夠在板上添加USB連接,並消除笨重的外部USB接口。
NT$762NT$680 未稅加入購物車Quick View -
加入購物車Quick View
NANO V3.0 FT232RL 副廠/相容 Arduino 原裝晶片非大陸晶片 附傳輸線
0 滿分 5 分Arduino NANO V3.0 FT232RL原裝晶片非大陸晶片
Arduino Nano 是 Arduino Uno的 微型版本。和Uno一樣,核心為 Atmel ATmega328 微處理器,具有14組數位輸出/入腳位,
以及8組類比腳位,可以用來控制周邊、監測感應器數值,並透過USB和運行Windows/Mac OSX/Linux的個人電腦連接;甚至能夠透過模擬方式作為HID(鍵盤、滑鼠或其他周邊)與電腦互動。超迷你的Nano,可以直接插在麵包板,或是您自定的電路板上,應用更加方便,甚至加速您的產品原型開發 。在Arduino IDE上傳程式開發板處理器需設定為ATmega328p(Old Bootloader)
加入購物車Quick View