- 商品說明
商品說明
Gravity: Heart Rate Monitor Sensor 超小型心率 血氧飽和值 監測傳感器/感測器 for Arduino
DFRobot心率傳感器是一款拇指大小的心率監測儀,專為Arduino微控制器設計。
它包括一個Gravity接口,可輕鬆實現即插即用連接。
該傳感器是基於PPG(PhotoPlethysmoGraphy)技術開發的脈衝傳感器。這是一種簡單且低成本的光學技術,可用於檢測組織微血管床中的血容量變化。
根據該理論,相對容易檢測心動週期的脈動分量。
傳感器有兩個孔,可用於連接皮帶。您可以將手指,手腕,耳垂或其他與皮膚接觸的區域包裹起來。
心臟傳感器有兩種信號輸出模式:模擬脈沖模式和數字方波模式。您可以使用撥號開關更改其輸出模式。有許多用戶場景,包括教育,體育或製造商/互動項目!
-
請注意:本產品不是醫療器材,不能用作此類產品或作為其附件使用,也不能用於診斷或治療任何疾病。
開始之前
打開包裝盒後,您可以在包裝內找到黑帶。將其穿過傳感器的孔,如照片中所示。然後你可以將它附在你的手指(建議),手腕或任何其他暴露血管的地方。請勿將皮帶太緊或太鬆,否則讀數可能不穩定。除此之外,在測試過程中,你應該穩定你的手指,不要移動太多,否則讀數會很差。
基於物聯網的心率監測系統是向Blynk應用程序發送脈率並從任何地方監測它的一個非常基礎的項目。
引腳說明
接線圖
規格
- 輸入電壓(Vin):3.3 – 6V(推薦5V)
- 輸出電壓:0 – Vin(模擬),0 / Vin(數字)
- 工作電流:<10mA
- 尺寸:28 x 24(mm),1.102“x 0.945”(in)
- 接口類型:PH2.0-3P
出貨清單
- 心率感測器 x1
- 手腕帶 x1
- PH2.0-3P電線 x1
-
請注意:
1.本產品不是醫療器械,不能用作此類產品或作為其附件使用,也不能用於診斷或治療任何疾病。
2.此為靜態心率傳感器,測量時請勿隨意移動,也勿按壓過緊。
Documents
=========================================================
Gravity: Heart Rate Monitor Sensor for Arduino
The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers.
This heart rate monitor sensor is a pulse sensor which is developed based on PPG techniques. This is a simple and low-cost optical technique that can be used to detect blood volume changing in the microvascular bed of tissues. It is relatively easy to detect the pulsatile component of the cardiac cycle according to this theory.
The sensor has two holes that you can use to attach to your belt. You can wrap on your finger, wrist, earlobe or other areas where it has contact with your skin.
A Gravity Interface is adapted to allow plug&play to ease the barrier of usage. The IO sensor shield is the best option to connect this heart rate sensor with your Arduino or other microcontrollers. Besides, this sensor can also be compatible with Raspberry Pi, intel edison, joule and curie by means of 3.3V Input Voltage.
NOTE:
1. This product is NOT a professional medical device and should not be used to diagnose or treat medical conditions.
2. This sensor is designed to work when the user is not moving. If used while moving it will give inaccurate results.
SPECIFICATION
- Input Voltage (Vin): 3.3 – 6V (5V recommended)
- Output Voltage: 0 – Vin (Analog), 0/ Vin (Digital)
- Operating current: <10mA
- Dimension: 28 x 24(mm), 1.102″ x 0.945″(in)
- Interface Type: PH2.0-3P
DOCUMENTS
SHIPPING LIST
- Heart Rate Monitor Sensor For Arduino x1
- Wrist belt x1
- PH2.0-3P cable x1
相關商品
-
加入購物車Quick View
2路電平轉換模組帶隔離 2-Channel Level Converter (12V to 5V) DFRobot原廠
0 滿分 5 分加入購物車Quick View -
2串 7.4V 聚合物鋰電池組保護板 大電流2串保護板
0 滿分 5 分NT$76NT$57 未稅加入購物車Quick View -
加入購物車Quick View
MAX471 電壓檢測 電流檢測模組 電壓感測器 電流感測器
0 滿分 5 分電流檢測採用美國美信公司生產的精密高端電流檢測放大器晶片MAX471
加入購物車Quick View -
Fermion:LWLP5000 差壓感測器±500pa DFRobot原廠
0 滿分 5 分NT$1,524NT$1,420 未稅加入購物車Quick View -
Grove – Alcohol Sensor 酒精感測器 seeed原廠
0 滿分 5 分酒精感測器(傳感器)為酒精專用檢測半導體傳感器。它具有良好的靈敏度和回應速度快的特性,本模組適用用於開發便攜式酒精檢測系統。
NT$286NT$220 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Multichannel Gas Sensor v2 多通道有害氣體感測器 seeed原廠
0 滿分 5 分加入購物車Quick View -
FlexiForce 壓力感測器 – 1磅 SparkFun原廠
0 滿分 5 分
NT$781NT$740 未稅加入購物車Quick View -
Grove – PIR Motion Sensor 紅外線人體移動探測感測器 seeed原廠
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View -
Grove – I2C Touch Sensor 電容式觸摸感測器 I2C 觸摸開關感應器 seeed原廠
0 滿分 5 分I2C 觸摸感測器使用飛思卡爾MPR121晶片,它可以感應觸碰和人的手指的接近。這個感應器包括兩部分——一個觸碰感應控制器和4個感應片。把感應片插到控制器上,就可以開始使用了。
NT$819NT$400 未稅加入購物車Quick View