乙太網路轉串口模組 RJ45 轉 TTL 模組 USR-TCP232-T2

商品說明

乙太網路轉串口模組 RJ45 轉 TTL 模組 產品介紹

一款全新的，小體積的串口轉以太網模組，這是一款能實現RJ45 網口與TTL串口之間直接的數據透明傳輸的設備。並可通過電平轉換電路應用於232和485接口。

TCP Server模式

串口轉以太網模塊監聽設定的端口并等待TCP客戶端連接。

串口設備發送的數據将通過串口轉以太網模塊透明傳輸給所有鏈接成功的客戶端。

TCP Client模式

串口轉以太網模塊向設定的IP地址發起TCP鏈接，

若鏈接失敗，串口轉以太網模塊将不斷嘗試重連直到成功。

若鏈接成功，服務端就可以與串口設備雙向透明傳輸數據。

 

UDP模式

串口轉以太網模塊将串口設備的數據UCP發送給指定的IP網絡設備。

串口轉以太網模塊同時監聽端口，将所有接收的數據轉發給串口設備。

HTTPD Client模式

支持串口數據HTTP（GET/POST）方式提交至指定服務器。

同步波特率

通過網絡指令動态改變串口轉以太網模塊的波特率、數據位、校驗位、停止位。

注冊包機制

以太網模塊作爲TCP Client和UCP Client時，建立鏈接後自動發送預定的注冊包做标識。

注冊包數據可以是MAC地址，也可以是自定義注冊數據。

串口網絡心跳包

網絡心跳包：模塊通過定時發送心跳包通知服務器處于活躍狀态，并保持與服務器的正常網絡鏈接。

串口心跳包：模塊通知串口設備處于活躍狀态，也可用于主動抓取傳感器的數據。

強大的虛拟串口

虛拟串口

利用虛拟串口軟件（USR-VCOM）實現原串口程序遠程控制設備

有人透傳雲

遠程管理：使用有人以太網模塊可以通過網絡遠程管理串口設備

延長串口通訊距離：将近距離的串口傳輸轉成網絡傳輸

 

Serial TTL UART Ethernet Module

USR-TCP232-T2 Low Cost Solution – It supports data transferred over LAN network or Internet to remote serial port.

 

Introduction of Serial UART Ethernet Module

USR-TCP232-T2 Serial TTL to Ethernet Module which can realize data bidirectional transparent transmission between serial TTL and RJ45 Port. USR-TCP232-T2 is based on Cortex-M0 core- low cost solution. It has characters of low power, fast speed and high efficiency.

 

Serial UART Ethernet Module – M0 Series

Solution	Cost-Effective, -25~75C
Keep-Alive	Detect the inactive connection, rebuild connection automatically
Built-In Webpage	Configure parameters
DHCP+DNS	DNS and DHCP automatically obtain an IP address
Firmware	Upgrade firmware via network
Client connection	Support 1 to 16 clients to be connected in TCP server mode

 

Feature of  Serial UART Ethernet Module

• DHCP &DNS, automatically obtain an IP address and query IP address through serial setting protocol
• Set parameters through webpage and serial AT command
• Upgrade firmware via network
• Auto-MDI/MDIX, RJ45 port with 10/100Mbps
• Serial port baud rate from 600 bps to 460.8 Kbps, Check bit of None,Odd,Even,Mark and Space
• Work mode: TCP Server, TCP Client, UDP Client, UDP Server, HTTPD Client
• Support virtual serial port and provide corresponding software USR-VCOM
• Heartbeat package mechanism to ensure connection is reliable, put an end to dead link
• User-defined registration package mechanism, check connection status and use as custom packet header
• Under TCP Server mode, Client number ranges from 1 to 16; default number is 4
• The global unique MAC address bought from IEEE, user can define MAC address
• Restore factory default
• Across the gateway, switches, routers
• Can work in LAN, also can work in the Internet (external network)
• Provide PC TCP/IP socket programming example such as VB,C++,Delphi,Android and IOS
• Support customization

 

Application Field of Serial UART Ethernet Module

• Industrial data transmission, industrial automation
• security and protection monitoring, public security
• Smart home, power control, environmental monitoring, intelligent agriculture
• Door check on work attendance system, POS system, rice selling system
• Building automation system, power monitoring, self-service banking system, telecom machine room monitoring

 

Image of Serial UARTto Ethernet Module

User Manual

[Datasheet] USR-TCP232-T2 Datasheet | download
[User Manual] USR-TCP232-T2 User Manual V1.1 | download
[User Manual] USR-M0-AT-Command-Set V1.0.0 | download
[Selection Table] Ethernet Module Selection Table | download

Development File

[Demo Code] TCPIP Demo Code | download

Application Software

[USR-VCOM] Virtual Serial Software V3.7.1.520 | download
[USR-TCP-Test] Testing Software | download
[USR-TCP-Test_android] Testing Software | download
[USR-M0] Setup Software V2.2.1.272 | download