GrovePi+ Plus 樹莓派 Grove 插座式 擴充板 擴展板 支援Pi 4B

商品說明

GrovePi+ Plus 樹莓派 Grove 插座式擴充板 擴展板 相容 Raspberry B/B+/A+/2/3/4

GrovePi+自帶15個Grove擴展口，可以完美兼容Raspberry Pi 3 Model B和B+跟最新Pi 4B，只需要將它插到樹莓派主板上，通過Grove口連接傳感器，就可以在樹莓派平台上設計各種硬件原型。 它是通過I2C接口進行通訊，連接模擬信號和數字信號的傳感器，發送、接收和執行樹莓派發出的指令。

GrovePi是將Grove Sensors引入Raspberry Pi的擴展板。作為GrovePi的新版本。它支持新的RaspberryPi模型B +和模型A +。有三個安裝孔可以完美匹配所有版本的Raspberry Pi，它們都是相機線纜出口孔。它還改善了電壓電平轉換子電路。

 

 

特徵

• 完全兼容Raspberry Pi型號 B/B+/A+/2/3/4
• 更快的SPI和更高可靠性的UART連接
• 即插即用
• 韌體更新程序簡單

 

功能

• 7個數字引腳
• 3個模擬引腳
• 3個I2C接口
• 1個連接到GrovePi的串口
• 1個連接到Raspberry Pi的串口
• Grove接口輸出電壓：5V直流電壓

 

 

如何開始使用  GrovePi +

第1步 – 堆疊銜接 GrovePi +擴充板到你的樹莓派上

第2步 – 將 GrovePi + 連接到樹莓派主機板

第3步 – 將你的程式碼上傳到樹莓派

第4步 – 開始以接收數據

 

 

出貨清單

• GrovePi + x1

 

Documents

• GrovePi+ wiki
• Programming the GrovePi+
• More Grove Sensors Compatibled with Raspberry Pi

 

查看更多樹莓派系列相關產品

 

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

 

GrovePi+

GrovePi+ is add-on board with 15 Grove 4-pin interfaces that brings Grove sensors to the Raspberry Pi. It is the newest version compatible with Raspberry Pi model B/B+/A+/2/3 perfectly.

GrovePi+ is an easy-to-use and modular system for hardware hacking with the Raspberry Pi, no need for soldering or breadboards: plug in your Grove sensors and start programming directly. Grove is an easy to use collection of more than 100 inexpensive plug-and-play modules that sense and control the physical world. By connecting Grove Sensors to Raspberry Pi, it empowers your Pi in the physical world. With hundreds of sensors to choose from Grove families, the possibilities for interaction are endless.

NOTE: The Raspberry Pi board is not included.

What is New

• Compatible with Raspberry Pi model B/B+/A+/2/3/4 perfectly
• Faster SPI and higher reliability UART connections
• Easier to assemble camera cables and LCD cables
• Simplified procedures of firmware update

Features

• 7 digital Ports
• 3 analoge Ports
• 3 I2C ports
• 1 Serial port connect to GrovePi
• 1 Serial port connect to Raspberry Pi
• Grove header Vcc output Voltage: 5Vdc

 

How to use

• Step 1 – Slip the GrovePi+ board over your Raspberry Pi
• Step 2 – Connect the Grove modules to the GrovePi+ board
• Step 3 – Upload your program to Raspberry Pi
• Step 4 – Begin taking in the world data