Wifi Shield V2.0 Arduino/ Seeeduino 無線網路 wifi 擴展板

商品說明

Wifi Shield V2.0 Arduino 無線網路 wifi 擴展板 產品介紹

WiFi Shield V2.0擴展板配置RN171 TCP/IP無線模組，可讓Arduino / Seeeduino連接高達802.11b / g的無線網絡。RN171無線模組支持TCP，UDP，FTP和HTTP通信協議，可以滿足大多數無線和物聯網（IoT）網絡項目的需求，例如智能家居網絡，機器人控件和個人氣象站。
屏蔽層覆蓋範圍廣，並通過新的穩定的車載天線傳輸強信號。Arduino的默認通信協議是UART / Serial，您可以通過我們合併的兩根跳線選擇用於RX和TX的數字引腳（D0至D7）。屏蔽層還具有兩個I2C和串行的Grove連接器，以使其可以與任何其他Groves一起插入。

 

特徵

• 帶有分步教程的各種演示
• 低功耗
• 與Arduino兼容，易於上手
• CMD支持

 

規格

• 外型尺寸：100毫米x65毫米x30毫米
• 重量：毛重41g
• 電池：排除
• 電壓：3.3〜5.5伏
• 當前：25〜400毫安
• 發射功率：0-10 dBm
• 頻率：2402〜2480 MHz
• 接口：UART（軟件串行，可以將數字引腳選擇為RN171的RX和TX）
• 網路速率：802.11b為1-11 Mbps 802.11g為6-54Mbps
• 安全的WiFi身份驗證：WEP-128，WPA-PSK（TKIP），WPA2-PSK（AES）
• 內置網絡應用：DHCP客戶端，DNS客戶端，ARP，ICMP ping，FTP，TELNET，HTTP，UDP，TCP
• RN-171：WIFLY GSX 802.11 b / g無線局域網模塊。

 

出貨清單

• Wifi Shield V2.0 x1

 

Documents

• [Wiki] Wifi Shield V2.0
• WiFi Shield V2.0 Eagle Files
• Schematic PDF
• RN-171 Datasheet
• Wifi Shield Library
• WiFi Module User Manual — This is where you’ll find all the commands for the RN-171 module in the shield.
• What is a Seeeduino
• w3schools Great website to learn HTML, Javascript, and JQuery

Wifi Shield V2.0

Featured with RN171 TCP/IP module, the WiFi shield allows your Arduino/Seeeduino to connect wireless networks up to 802.11b/g. The RN171 module supports TCP, UDP, FTP and HTTP communication protocols, which meet the needs of most wireless and Internet of Things (IoT) network projects, such as smart home networks, robots controls and personal weather stations.

The shield covers a wide range and transmit strong signals with the newly, stable on-board antenna. The default communication protocol with the Arduino is UART/Serial, and you can select which digital pins (D0 to D7) to use for RX and TX with the two jumper rows we’ve incorporated. The shield also has two Grove connectors of I2C and Serial to make it can be plugged with any other Groves.

The shield is well documented with demos and you can check the User Manual here online.

Features

• Various demos with step-by-step tutorials
• Low power consumption
• Compatible with Arduino, easy to get started with
• CMD Support

Technical details

Dimensions	100mm x65mm x30mm
Weight	G.W 41g
Battery	Exclude
Voltage	3.3~5.5 V
Current	25~400mA
Transmit power	0-10 dBm
Frequency	2402~2480 MHz
Interface	UART (Software serial, you can choose the digital pins as RX and TX of RN171)
Network rate	1-11 Mbps for 802.11b/6-54Mbps for 802.11g
Secure WiFi authentication	WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES)
Built-in networking applications	DHCP client, DNS client, ARP, ICMP ping, FTP, TELNET, HTTP, UDP, TCP
RN-171	WIFLY GSX 802.11 b/g Wireless LAN Module.