





Wifi Shield V2.0 Arduino/ Seeeduino 無線網路 wifi 擴展板
NT$1,762 NT$1,400 未稅
WiFi Shield V2.0擴展板配置RN171 TCP/IP無線模組,可讓Arduino / Seeeduino連接高達802.11b / g的無線網絡。RN171無線模組支持TCP,UDP,FTP和HTTP通信協議,可以滿足大多數無線和物聯網(IoT)網絡項目的需求,例如智能家居網絡,機器人控件和個人氣象站。
尚有庫存
- 詳細資訊
商品說明
WiFi Shield V2.0 擴展板配置RN171 TCP/IP無線模組,可讓Arduino / Seeeduino連接高達802.11b / g的無線網絡。RN171無線模組支持TCP,UDP,FTP和HTTP通信協議,可以滿足大多數無線和物聯網(IoT)網絡項目的需求,例如智能家居網絡,機器人控件和個人氣象站。
屏蔽層覆蓋範圍廣,並通過新的穩定的車載天線傳輸強信號。Arduino的默認通信協議是UART / Serial,您可以通過我們合併的兩根跳線選擇用於RX和TX的數字引腳(D0至D7)。屏蔽層還具有兩個I2C和串行的Grove連接器,以使其可以與任何其他Groves一起插入。
WiFi Shield V2.0 特徵
- 帶有分步教程的各種演示
- 低功耗
- 與Arduino兼容,易於上手
- CMD支持
WiFi Shield V2.0 規格
- 外型尺寸:100毫米x65毫米x30毫米
- 重量:毛重41g
- 電池:排除
- 電壓:3.3〜5.5伏
- 當前:25〜400毫安
- 發射功率:0-10 dBm
- 頻率:2402〜2480 MHz
- 接口:UART(軟件串行,可以將數字引腳選擇為RN171的RX和TX)
- 網路速率:802.11b為1-11 Mbps 802.11g為6-54Mbps
- 安全的WiFi身份驗證:WEP-128,WPA-PSK(TKIP),WPA2-PSK(AES)
- 內置網絡應用:DHCP客戶端,DNS客戶端,ARP,ICMP ping,FTP,TELNET,HTTP,UDP,TCP
- RN-171:WIFLY GSX 802.11 b / g無線局域網模塊。
WiFi Shield V2.0 出貨清單
- Wifi Shield V2.0 x1
WiFi Shield V2.0 Documents
- [Wiki] Wifi Shield V2.0
- WiFi Shield V2.0 Eagle Files
- Schematic PDF
- RN-171 Datasheet
- Wifi Shield Library
- WiFi Module User Manual — This is where you’ll find all the commands for the RN-171 module in the shield.
- What is a Seeeduino
- w3schools Great website to learn HTML, Javascript, and JQuery
Wifi Shield V2.0 技術補充(英文)
以下為原廠英文技術說明,提供使用者參考。
Featured with RN171 TCP/IP module, the WiFi shield allows your Arduino/Seeeduino to connect wireless networks up to 802.11b/g. The RN171 module supports TCP, UDP, FTP and HTTP communication protocols, which meet the needs of most wireless and Internet of Things (IoT) network projects, such as smart home networks, robots controls and personal weather stations.
The shield covers a wide range and transmit strong signals with the newly, stable on-board antenna. The default communication protocol with the Arduino is UART/Serial, and you can select which digital pins (D0 to D7) to use for RX and TX with the two jumper rows we’ve incorporated. The shield also has two Grove connectors of I2C and Serial to make it can be plugged with any other Groves.
The shield is well documented with demos and you can check the User Manual here online.
Features
- Various demos with step-by-step tutorials
- Low power consumption
- Compatible with Arduino, easy to get started with
- CMD Support
Technical details
| Dimensions | 100mm x65mm x30mm |
| Weight | G.W 41g |
| Battery | Exclude |
| Voltage | 3.3~5.5 V |
| Current | 25~400mA |
| Transmit power | 0-10 dBm |
| Frequency | 2402~2480 MHz |
| Interface | UART (Software serial, you can choose the digital pins as RX and TX of RN171) |
| Network rate | 1-11 Mbps for 802.11b/6-54Mbps for 802.11g |
| Secure WiFi authentication | WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES) |
| Built-in networking applications | DHCP client, DNS client, ARP, ICMP ping, FTP, TELNET, HTTP, UDP, TCP |
| RN-171 | WIFLY GSX 802.11 b/g Wireless LAN Module. |
相關商品
-
Grove – Screw Terminal 4P 螺絲端子座 額定功率可達 125V@6A seeed
0 滿分 5 分Grove – Screw Terminal 4P 螺絲端子座有四個 3.5mm 端口座可達125V @ 6A。終端可以接受30〜20AWG線。這是最常見的螺距螺紋端子。Grove – Screw Terminal 有四個端口,包括GND,VCC和另外兩個未限定端口。
NT$100NT$80 未稅 -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測 感測器 seeed
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模組。他的工作頻率在42KHz,適合用於中距離或近距離的探測。該模組具有超音波發射器和超音波接收器,因此您可以將其視為超音波收發器。
NT$190NT$140 未稅 -
Grove – GSR Sensor 測謊器 皮膚電阻感測器 流汗感測器
0 滿分 5 分GSR通過測量皮膚電流反應來測量皮膚電導率。強烈的情緒會刺激你的交感神經系統,導致汗腺分泌更多的汗水.通過兩個電極連接到兩個手指來發現這種強烈的情緒,能夠製作與情感有關的項目(如睡眠質量監視器)。
NT$433NT$320 未稅 -
Grove – Gas Sensor(MQ5) 氣體感測器 Seeed
0 滿分 5 分Grove氣體感測器(MQ5)模組可用於氣體洩漏檢測(在家庭和工業中)。可檢測液化石油氣,天然氣,城鎮煤氣等。基於其快速響應時間,測量可以盡快進行。且其靈敏度也可以通過電位器來進行調節。
NT$276NT$220 未稅 -
Grove – Recorder v3.0 錄音感測器 錄音機 語音錄放模組
0 滿分 5 分Grove錄音機基於ISD9160FI 晶片,通過設定電阻值和播放週期其可記錄最長達 83秒。能夠提供單片機聲音的存儲。記錄時間可通過模組的PCB採樣電阻改變。可由板載按鍵或微控制器如 Arduino 或 Seeeduino 直接控制。
NT$500NT$400 未稅 -
Grove – Fingerprint Sensor 光學指紋感測器模組 指紋建檔/識別
0 滿分 5 分指紋感測器模組通過光學檢測,識別輸入的指紋是否和已經建檔錄存的指紋數據統一。本指紋識別感測器採用高性能的DSP晶片進行圖片渲染、計算、識別、搜索。你也可以直接錄存新的指紋,最多可以錄入162個。
NT$1,667NT$1,300 未稅 -
Seeed Grove MQ3 酒精感測器模組 高靈敏快速響應 支援 Arduino/樹莓派
0 滿分 5 分想用 Arduino 製作酒精感測器?Seeed Studio Grove – MQ3 酒精感測器具備高靈敏度與快速回應特性,檢測範圍達 0.05-10 mg/L。適用於家庭與工業氣體洩漏檢測,支援電位計調整靈敏度。台灣現貨,隨附 Grove 連接線!
NT$362NT$240 未稅 -
Seeed Grove 數位光敏感測器 (TSL2561) I2C 介面 寬量程 40,000 LUX 支援 Arduino & 樹莓派
0 滿分 5 分Grove – Digital Light Sensor 數位型光敏感測器 是基於I2C 光度- 數位 轉換器, TSL2561 將光強度轉換為數位訊號。不同於傳統的類比式光感測器,數位光敏模組的特點是由於其雙光敏二極管,可選擇的光譜範圍:紅外線和全光譜。
NT$320NT$220 未稅 -
Grove – Relay 繼電器模組 | 支援 Arduino & Raspberry Pi | 輕鬆控制高電壓電路
0 滿分 5 分Grove-Relay 模組,一個低電壓控制高電壓的數字開關。透過 5V 控制器,可輕鬆驅動高達 250V AC / 30V DC、5A 的電路,內建 LED 指示燈,使用更方便。
NT$200NT$160 未稅 -
Seeed Studio XIAO ESP32-S3 Sense TinyML 機器學習入門套件 (哈佛課程推薦)
0 滿分 5 分想掌握邊緣人工智慧?本 TinyML 機器學習套件遵循哈佛大學課程體系設計,核心採用 XIAO ESP32-S3 Sense,板載 OV3660 相機與數位麥克風,搭配 6 軸 IMU 與 OLED 擴充板。從影像分類到語音辨識,帶您無縫解鎖邊緣 AI 無限可能!立即選購
NT$2,095NT$1,900 未稅




















