





Micro OLED Breakout Board 黑底藍 液晶模組 Sparkfun美國製
NT$500 未稅
Micro OLED Breakout Board 會分解出一個小的單色藍黑色OLED。它的寬度為64像素,高度為48像素,跨度為0.66英寸。它雖然很微小,但仍然具有衝擊力-OLED顯示屏非常清晰,您可以在其中容納大量圖形。
尚有庫存
- 商品說明
商品說明
Micro OLED 黑底藍 液晶模組 產品介紹
Micro OLED Breakout Board 會分解出一個小的單色藍黑色OLED。它的寬度為64像素,高度為48像素,跨度為0.66英寸。
它雖然很微小,但仍然具有衝擊力-OLED顯示屏非常清晰,您可以在其中容納大量圖形。
儘管如此,最重要的是Micro OLED易於通過SPI或I 2 C接口進行控制。
規格
- 工作電壓:3.3V
- 屏幕尺寸:64×48像素(0.66英寸寬)
- 單色黑底藍
- SPI或I 2 C接口
出貨清單
- Micro OLED Breakout x1
Documents
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (SSD1306)
- GitHub (Design Files & Example Code)
- GitHub (Library)
- Product Video
=========================================================
SparkFun Micro OLED Breakout
The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceivingly large amount of graphics on there. This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resorting to serial output, and teaching a little game theory while creating a fun, Arduino-based video game. Most important of all, though, is the Micro OLED is easy to control over either an SPI or I2C interface.
You may be asking yourself, “Why does this board look so familiar?” Yes, this is essentially a MicroView without the Arduino portion. We understand that sometimes you just need a breakout, an open door for you to explore the possibilities of a super small OLED screen. Speaking of, the screen on this breakout is only 64 pixels wide and 48 pixels tall, measuring 0.66″ across.
In total, the Micro OLED Breakout provides access to 16 of the OLED’s pins. Fortunately, though, you’ll only need about half of them to make the display work. The top row of pins (GND-CS) breaks out everything you’d need to interface with the OLED over an SPI or I2C interface. The pins on the bottom (D7-vB) are mostly only used if you need to control the display over a parallel interface. This board operates at 3.3V with a current of 10mA (20mA max).
Features
- Operating Voltage: 3.3V
- Screen Size: 64×48 pixels (0.66″ Across)
- Monochrome Blue-on-Black
- SPI or I2C Interface
相關商品
-
5路循跡感測器 五路紅外線尋跡感測器 帶碰撞、距離檢測功能
0 滿分 5 分5路循跡感測器 專門設計用作黑(白)線的尋取,特別適合於複雜黑白線、交叉黑白線的檢測,它有6路高靈敏度的紅外感測器(5路巡線、1路蔽障),能夠對黑白線準確的識別
NT$190NT$140 未稅 -
Grove – PIR Motion Sensor 紅外線人體移動探測感測器
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅 -
2串聯7.4V聚合物鋰電池組保護板 大電流2聯串保護板
0 滿分 5 分- 過充電壓範圍:4.25-4.35v±0.05v
- 過放電壓範圍: 2.5-3.0v±0.05v
- 上限工作電流:8A
- 工作溫度:-40—+50℃
- 上限瞬間電流:10A
- 存儲條件:-40– +80℃
- 靜態電流:小於10uA
- 有效壽命:大於50000小時
- 內阻:小於300mΩ
- 短路保護:可保護,需充電恢復
- 充電電壓:8.4V-9V
NT$76NT$57 未稅 -
Grove – Air quality sensor v1.3 空氣品質感測器模組
0 滿分 5 分主要可以監測的氣體是一氧化碳,醇,丙酮,稀釋劑,甲醛等輕微毒性氣體。本模組兼容 5V和3.3V電源。
NT$300NT$200 未稅 -
Gravity: I2C 非接觸式紅外線溫度感測器 MLX90614 for Arduino
0 滿分 5 分MLX90614 紅外測溫模組,通過探測物體紅外輻射能量的大小和波長的分佈來檢測物體的表面溫度。紅外測溫器由光學系統、光電探測器、信號放大器和信號處理及輸出等部分組成。光學系統匯聚其視場內的目標紅外輻射能量,視場的大小由測溫儀的光學零件及其位置確定。紅外能量聚焦在光電探測器上並轉變為相應的電信號。
-
TXB0104 電壓位準 I/O轉換板 4bit Sparkfun美國製
0 滿分 5 分Texas Instruments TXB0104 模組的擴展板。TXB0104是一款具有自動方向感應功能的4位雙向電壓電平轉換器。這個4位非反相轉換器使用兩個獨立的可配置電源軌。A端口旨在跟踪VCCA。VCCA接受1.2V至3.6V的任何電源電壓。B端口用於跟踪VCCB。VCCB接受1.65V至5.5V的任何電源電壓。這允許在1.2V,1.5V,1.8V,2.5V,3.3V和5V電壓節點之間進行通用的低壓雙向轉換。VCCA不應超過VCCB。我們已經打破了這個模塊上的每個引腳,您可以輕鬆訪問A和B端口。
-
Grove – Gas Sensor(MQ5) 氣體感測器 Seeed
0 滿分 5 分Grove氣體感測器(MQ5)模組可用於氣體洩漏檢測(在家庭和工業中)。可檢測液化石油氣,天然氣,城鎮煤氣等。基於其快速響應時間,測量可以盡快進行。且其靈敏度也可以通過電位器來進行調節。
NT$276NT$220 未稅 -
Force Sensitive Resistor – FSR400 Small 電阻式壓力感測器 SparkFun原廠
0 滿分 5 分直徑為0.16“(4 mm)的有源感應區域,Interlink Electronics的FSR會根據傳感區域的壓力而改變其阻力,力越強,電阻越小,當沒有壓力應用於FSR,其電阻將大於1MΩ,全壓施加電阻為2.5kΩ。
-
XH-W1209 紅光數位顯示溫控器 高精度溫度控制器/控溫開關/微型溫控板 送外殼
0 滿分 5 分XH-W1209 數顯溫控器 紅光+外殼 高精度溫度控制器/控溫開關/微型溫控板 送外殼,1套重量:43克左右;尺寸:49mm*40mm。硬體介紹::感測器接口;程序更新接口;功能設置鍵;增加按鍵+;DC12V;減小按鍵;;20A繼電器;繼電器輸出端口;DC12V工作接口。
-
Fermion: BMM150 Triple Axis Magnetometer Sensor 三軸數位地磁感測器
0 滿分 5 分NT$286NT$260 未稅