Humidity Sensor Breakout – HIH-4030 濕度感測器/傳感器 SparkFun原廠
NT$700 未稅
這是霍尼韋爾HIH-4030濕度傳感器的分線板。 HIH-4030測量相對濕度(%RH)並將其作為模擬輸出電壓輸出。 您可以將傳感器的輸出直接連接到微控制器上的ADC; 並且,由於傳感器接近線性電壓輸出,數據非常易於處理。
尚有庫存
- 商品說明
商品說明
Humidity Sensor Breakout – HIH-4030 溫度感測器/傳感器
這是霍尼韋爾HIH-4030濕度傳感器的分線板。 HIH-4030測量相對濕度(%RH)並將其作為模擬輸出電壓輸出。 您可以將傳感器的輸出直接連接到微控制器上的ADC; 並且,由於傳感器接近線性電壓輸出,數據非常易於處理。
施加到電源引腳的電壓應該在4-5.8VDC之間,最好在5V。 傳感器通常只消耗約200μA。
該產品如圖所示,HIH-4030焊接在分線板上。 3針插頭的引腳間隔0.1“。
特徵
- 近線性模擬輸出
- 4-5.8VDC電壓供應
- 所有引腳分離為0.1英寸間距的接頭
- 激光修剪互換性
- 低功耗設計,典型電流消耗僅為200μA
- 提高準確性
- 快速的響應時間
- 穩定,低漂移性能
- 尺寸0.75×0.30“(19.05×7.62mm)
Documents
=========================================================
SparkFun Humidity Sensor Breakout – HIH-4030
This is a breakout board for Honeywell’s HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensor’s near linear voltage output, the data is very easy to process.
Voltage applied to the supply pins should be within 4-5.8VDC, and optimally at 5V. The sensor will typically only consume about 200μA.
This product comes as shown in the picture, with the HIH-4030 soldered onto the breakout board. The pins of the 3-pin header are spaced by 0.1″.
Features
- Near linear, analog output
- 4-5.8VDC voltage supply
- All pins broken out to a 0.1″ pitch header
- Laser trimmed interchangeability
- Low power design, typical current draw of only 200μA
- Enhanced accuracy
- Fast response time
- Stable, low drift performance
- 0.75 x 0.30 ” (19.05 x 7.62 mm)
相關商品
-
Grove – 3-Axis Analog Accelerometer 3軸加速度計 seeed原廠
0 滿分 5 分ADXL335 是一款小巧,薄型,低功耗,完整的3軸加速度計,具有信號調理電壓輸出。 該產品可測量加速度,最小滿量程範圍為±3 g。
NT$476NT$380 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – RTC 高精度時間模組 seeed原廠
0 滿分 5 分支持I2C協議的時鐘芯片DS1307。它使用鋰電池(CR1225)。時鐘/日曆提供秒,分,小時,日,日,月和年信息。
NT$271NT$220 未稅加入購物車Quick View -
Grove – PIR Motion Sensor 紅外線人體移動探測感測器 seeed原廠
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅加入購物車Quick View -
K型M6螺釘式熱電偶 溫度感測器測溫線 MAX6675探頭感溫線(不含溫度感測器)
0 滿分 5 分NT$95NT$80 未稅加入購物車Quick View -
加入購物車Quick View
2路電平轉換模組帶隔離 2-Channel Level Converter (12V to 5V) DFRobot原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
Gravity: I2C 非接觸式紅外線溫度感測器 MLX90614 for Arduino DFRobot原廠
0 滿分 5 分加入購物車Quick View -
Grove – I2C Touch Sensor 電容式觸摸感測器 I2C 觸摸開關感應器 seeed原廠
0 滿分 5 分I2C 觸摸感測器使用飛思卡爾MPR121晶片,它可以感應觸碰和人的手指的接近。這個感應器包括兩部分——一個觸碰感應控制器和4個感應片。把感應片插到控制器上,就可以開始使用了。
NT$819NT$400 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Rotary Angle Sensor 旋轉角度電位器模組 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove – Infrared Temperature Sensor 紅外線 溫度感測器模組 seeed原廠
0 滿分 5 分紅外溫度傳感器通過接收物體發出的紅外線來測量其溫度。
NT$457NT$380 未稅加入購物車Quick View