Grove – PH 感測器套件 (E-201C-Blue ) seeed原廠
- 商品說明
商品說明
Grove – PH 感測器套件 (E-201C-Blue )
PH傳感器測量水基溶液中的氫離子活性,我們通常用它來測量液體的PH值。廣泛用於化工、醫藥、染料、科研等需要進行酸鹼度檢測的行業。該套件中的驅動板支持 3.3V 和 5V 系統。並且通過標準的 BNC 探針接口和 Grove 連接器,與 Arduino 和 Raspberry Pi 一起工作非常方便。
特徵
- 廣泛用於化學工業,製藥工業,染料工業和科學研究
- 支持Arduino和Rasberry Pi
- 體積小巧,易於部署且具有成本效益
- 分辨率:最高 ±0.15PH(STP)
- 探頭可更換
規格
- 工作電壓:3.3V / 5伏
- 範圍:0-14PH
- 解析度:±0.15PH(STP)
- 響應時間:<1分鐘
- 探頭接口:BNC
- 測量溫度:0-60℃
- 內部電阻:≤250MΩ(25℃)
- 鹼錯誤:0.2PH(1mol / L)Na +,PH14)(25℃)
注意事項
- 在測量之前,必須使用已知PH值的標準緩衝溶液校準電極。為了獲得更準確的結果,已知的PH值應該是可靠的,並且更接近所測值。
- 測量完成後,應戴上電極保護套。應在保護套中放入少量3.3mol / L氯化鉀溶液,以保持電極燈泡濕潤。
- 電極的前端必須保持清潔乾燥,以絕對防止輸出兩端短路,否則會導致測量結果不准確或無效。
- 長期使用電極後,如果發現梯度略有誤差,可以將電極的下端浸入4%HF(氫氟酸)中3-5秒,然後用蒸餾水洗滌,然後浸泡在氯化鉀溶液中使其變新。
- 本產品未通過 RoHS 認證。
- 本產品不應長時間浸泡在任何溶液中
出貨清單
- PH探測器 x1
- Grove連接線 x1
- 驅動板 x1
- 飽和氯化鈉溶液 x1
Documents
- [Wiki] PH傳感器套件(E-201C-Blue)
=========================================================
Grove – PH Sensor Kit (E-201C-Blue )
Feature
- Widely used in chemical industry, pharmaceutical industry, dye industry, and scientific research
- Support with both Arduino and Rasberry Pi
- Compact size for easy deployment and cost-effective
- Resolution: at most ±0.15PH (STP)
- Probe replaceable
Description
Are you trying to find an easy to use and cost-effect PH sensor/meter? Do you want to use a PH sensor/meter with Arduino or Raspberry Pi? Well, this new Grove – PH Sensor will meet all your needs. The PH sensor measures the hydrogen-ion activity in water-based solutions, we usually use it to measure the PH of a liquid. It is widely used in the chemical industry, the pharmaceutical industry, the dye industry, and scientific research where acidity and alkalinity testing is required. The drive board in this kit support both 3.3V and 5V system. And with the stander BNC probe interface and Grove connector, it is very convenient to work with Arduino and Raspberry Pi.
Note
This product is non-RoHS certified.
This product should not be soaked in any solution for a long time
Specification
Items | Values |
---|---|
Operating voltage | 3.3V/5V |
Range | 0-14PH |
Resolution | ±0.15PH(STP) |
Response time | <1min |
Probe Interface | BNC |
Measure temperature | 0-60℃ |
Internal resistance | ≤250MΩ(25℃) |
Alkali error | 0.2PH(1mol/L)Na+,PH14)(25℃) |
Cautions
- Before being measured, the electrode must be calibrated with a standard buffer solution of known PH value. In order to obtain more accurate results, the known PH value should be reliable, and closer to the measured one.
- When the measurement is completed, the electrode protective sleeve should be put on. A small amount of 3.3mol / L potassium chloride solution should be placed in the protective sleeve to keep the electrode bulb wet.
- The leading end of the electrode must be kept clean and dry to absolutely prevent short circuits at both ends of the output, otherwise it will lead to inaccurate or invalid measurement results.
- After long-term use of the electrode, if you find that the gradient is slightly inaccurate, you can soak the lower end of the electrode in 4% HF (hydrofluoric acid) for 3-5 seconds, wash it with distilled water, and then soak in potassium chloride solution to make it new.
Part list
Items | Quantity |
---|---|
PH prober | 1 |
Grove cable | 1 |
Driver board | 1 |
Saturated sodium chloride solution | 1 |
相關商品
-
Grove – EMG Detector 肌電圖 檢測儀 肌肉信號傳感器/感測器 肌電檢測器 seeed原廠
0 滿分 5 分傳感器採集小肌肉信號然後進行第2次放大和濾波,輸出信號可以被Arduino識別。
NT$1,486NT$1,320 未稅加入購物車Quick View -
Grove – Fingerprint Sensor 光學指紋感測器模組 指紋建檔/識別 seeed原廠
0 滿分 5 分指紋感測器模組通過光學檢測,識別輸入的指紋是否和已經建檔錄存的指紋數據統一。本指紋識別感測器採用高性能的DSP晶片進行圖片渲染、計算、識別、搜索。你也可以直接錄存新的指紋,最多可以錄入162個。當傳感器工作時,紅色LED開始閃爍。適合用來做指紋鎖等項目。
NT$1,667NT$1,300 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ2) 煙霧氣體感測器 seeed原廠
0 滿分 5 分檢測的氣體包括異丁烷,液化石油氣,甲烷,乙醇,氫氣,煙霧等。感測器的回應速度快,便於實際的測量。通過板上的電位器調整輸出精度
NT$257NT$220 未稅加入購物車Quick View -
Grove – PIR Motion Sensor 紅外線人體移動探測感測器 seeed原廠
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅加入購物車Quick View -
Grove-LoRa-E5 (STM32WLE5JC)無線傳輸模組 868/915 MHz,支援LoRaWAN seeed原廠
0 滿分 5 分內置LoRa-E5 STM32WLE5JC的Grove LoRa-E5由ARM Cortex M4超低功耗MCU內核和LoRa SX126x供電,是一種易於使用的無線模塊,支持EU868和US915頻率上的LoRaWAN協議,並且(G )FSK,BPSK,(G)MSK,LoRa調製。
NT$714NT$560 未稅加入購物車Quick View -
Grove – GPS Module 衛星模組 適用於 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分Grove – GPS模組是一款低成本及可程式設計的GPS模組,可用於手持設備GPS資料的採集。模組採用串口通信,可通過串口進行資料的讀取。它設有一個50通道的u-blox 5定位引擎,首次定位時間(TTFF)小於1s。跟蹤和採集的靈敏度均達到-160dBm,適用於個人導航及位置服務的專案。
NT$857NT$700 未稅加入購物車Quick View -
加入購物車Quick View
Grove – Multichannel Gas Sensor v2 多通道有害氣體感測器 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測傳感器 seeed原廠
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模塊。他的工作頻率在42KHz,適合用於中距離或近距離的探測。已經附上 Arduino 函數庫。
NT$190NT$140 未稅加入購物車Quick View -
Grove – UV Sensor UV 紫外線感測器 seeed原廠
0 滿分 5 分NT$457NT$300 未稅加入購物車Quick View -
Grove – 3-Axis Digital Gyro 三軸電子陀螺儀 (I2C) ITG 3200 seeed原廠
0 滿分 5 分電子輸出的三軸MEMS運動處理陀螺儀。適用於遊戲、3D鼠標或其他運動檢測相關的應用。
NT$952NT$620 未稅加入購物車Quick View