- 商品說明
商品說明
Grove – Infrared Reflective Sensor 紅外線循跡模組 循跡避障模塊 v1.2
紅外線的反射是通過檢測物體表面發射光線的顏色和距離。因此,當一個淺色物體靠近時,信號強度增加,指示燈變成紅色,當深色物體靠近時,信號強度減弱,指示燈熄滅。紅外反射傳感器主要應用在尋線跟跟踪、旋轉測速,或是其他被檢測物體顏色對比強烈的場景。
特徵
- Grove兼容且易於使用
- 高度敏感和可靠
- 佔地面積小
- 適用於不同場合的靈敏度
- 內置指示燈LED
- 通過電位計可調節閾值
規格
工作電壓(V) | 3.3-5V |
工作電流(mA) | 14.69-15.35毫安 |
有效的可檢測距離 | 4-15毫米 |
單色線的最小可檢測寬度 | 10mm |
光電晶體管:峰值靈敏度波長 | 800納米 |
IR LED:峰值發光波長 | 940nm |
數字輸出 | 0或VCC |
反射光電傳感器 | RPR-220 |
出貨清單
- Grove – Infrared Reflective Sensor x1
- Grove連接線 x1
Documents
=========================================================
Grove – Infrared Reflective Sensor v1.2
Grove – Infrared Reflective Sensor v1.2 can be used for detection of proximity and color of objects. The reflective photosensor – RPR–220 used in this module consists of an infrared light emitting diode and a high –sensitivity phototransistor. Light-colored objects directly in front of the sensor will reflect more infrared light as well as generate more current in the phototransistor than an object with dark-colored surfaces, this can be tell from a built-in indicator LED which will turn red with sufficient flow of current. Also, the intensity of the reflective light increases as the object getting closer. You can adjust the potential-meter on the back of the board if you want to detect a specific object (eg. Black line) at a certain distance.
This sensor is a widely used in applications such as line-following robots, rotary speed detection, auto-data logging on utility meters or other situations where color or distance contrast is sharp.
Features
- Panel-mounting Grove interface
- Digital output: 0 or VCC
- Built-in indicator LED
- Threshold adjustable via potentiometer
- Power supply: 3.5 – 5.5V DC
- Reflective Photosensor: RPR-220
- Effective working distance: 4-15mm
- Minimum detectable width for monochrome lines: 10mm
- Connector: 4 pin Buckled Grove interface
- Dimension: 20mm*20mm
相關商品
-
Grove – Gas Sensor(MQ2) 煙霧氣體感測器 seeed原廠
0 滿分 5 分檢測的氣體包括異丁烷,液化石油氣,甲烷,乙醇,氫氣,煙霧等。感測器的回應速度快,便於實際的測量。通過板上的電位器調整輸出精度
NT$257NT$220 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – Digital Light Sensor 數位型光敏感測器 偵測光亮強度傳感器 seeed原廠
0 滿分 5 分NT$400NT$320 未稅加入購物車Quick View -
Grove – Serial Camera Kit 串列通訊攝影機鏡頭套件 seeed原廠
0 滿分 5 分本套件中提供了兩種規格的鏡頭。標準配置用於普通照片拍攝,廣角拍攝特別適用於監控項目。
加入購物車Quick View -
Grove – BLE 工業級 UART轉 BLE 藍牙 HM-11 藍芽模組 seeed原廠
0 滿分 5 分NT$638NT$460 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ5) 氣體感測器 Seeed原廠
0 滿分 5 分可檢測液化石油氣,天然氣,城鎮煤氣等。基於其快速響應時間,測量可以盡快進行。且其靈敏度也可以通過電位器來進行調節。
NT$276NT$220 未稅加入購物車Quick View -
Grove – PIR Motion Sensor 紅外線人體移動探測感測器 seeed原廠
0 滿分 5 分這是一個極易使用的紅外線 PIR人體運動探測感測器。通過這個感測器,你可以使你的作品對運動,例如人類的運動作出互動。只要將其接到Grove – Base Shield上,並且下載程序,當有人走入它的探測範圍時,PIR運動探測傳感器就會在它的SIG腳上輸出一個HIGH信號。
NT$333NT$260 未稅加入購物車Quick View -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測傳感器 seeed原廠
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模塊。他的工作頻率在42KHz,適合用於中距離或近距離的探測。已經附上 Arduino 函數庫。
NT$190NT$140 未稅加入購物車Quick View -
Grove – GSR Sensor 測謊器 皮膚電阻感測器 流汗感測器 seeed原廠
0 滿分 5 分NT$433NT$320 未稅加入購物車Quick View -
Grove – EMG Detector 肌電圖 檢測儀 肌肉信號傳感器/感測器 肌電檢測器 seeed原廠
0 滿分 5 分傳感器採集小肌肉信號然後進行第2次放大和濾波,輸出信號可以被Arduino識別。
NT$1,486NT$1,320 未稅加入購物車Quick View