Adafruit RFM96W LoRa Radio Transceiver Breakout – 433MHz 含 SMA天線接頭
NT$952 NT$880 未稅
+20dBm的LoRa分組無線電,但可以進一步延伸。他們可以使用簡單的有線天線輕鬆地走2 Km視線,或者使用定向天線和設置調整可達20Km
- 分組廣播與即將到來的Arduino圖書館
- 使用免授權的ISM頻段:“歐洲ISM”@ 868MHz或“980MHz的”美國ISM“
- 為uFL或SMA無線電連接器使用簡單的有線天線或現場
- SX1276基於LoRa®的帶SPI接口的模塊
- +5至+20 dBm至100 mW功率輸出能力(軟件可選擇功率輸出)
- + 20dBm傳輸期間〜100mA峰值,有源收音期間〜30mA。
- 範圍約 2Km,取決於障礙物,頻率,天線和功率輸出
尚有庫存
- 商品說明
商品說明
Adafruit RFM96W LoRa Radio Transceiver Breakout – 433 MHz 雙頻無線傳輸模組 含 Edge-Launch SMA Connector 天線接頭
雙頻無線傳輸模組 :+20dBm的LoRa分組無線電,但可以進一步延伸。他們可以使用簡單的有線天線輕鬆地走2 Km視線,或者使用定向天線和設置調整可達20Km
- 分組廣播與即將到來的Arduino圖書館
- 使用免授權的ISM頻段:“歐洲ISM”&”美國ISM“
- 為uFL或SMA無線電連接器使用簡單的有線天線或現場
- SX1276基於LoRa®的帶SPI接口的模塊
- +5至+20 dBm至100 mW功率輸出能力(軟件可選擇功率輸出)
- + 20dBm傳輸期間〜100mA峰值,有源收音期間〜30mA。
- 範圍約 2Km,取決於障礙物,頻率,天線和功率輸出
433 MHz 雙頻無線傳輸模組 原廠技術導覽:
https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts
“You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio operates exactly the same way: you send signals here, they receive them there. The only difference is that there is no cat.”
Sending data over long distances is like magic, and now you can be a magician with this range of powerful and easy-to-use radio modules. Sure, sometimes you want to talk to a computer (a good time to use WiFi) or perhaps communicate with a Phone (choose Bluetooth Low Energy!) but what if you want to send data very far? Most WiFi, Bluetooth, Zigbee and other wireless chipsets use 2.4GHz, which is great for high speed transfers. If you aren’t so concerned about streaming a video, you can use a lower license-free frequency such as 433 or 900 MHz. You can’t send data as fast but you can send data a lot farther.’
Also, these packet radios are simpler than WiFi or BLE, you dont have to associate, pair, scan, or worry about connections. All you do is send data whenever you like, and any other modules tuned to that same frequency (and, with the same encryption key) will receive. The receiver can then send a reply back. The modules do packetization, error correction and can also auto-retransmit so its not like you have worry about everything but less power is wasted on maintaining a link or pairing.
These modules are great for use with Arduinos or other microcontrollers, say if you want a sensor node nework or transmit data over a campus or town. The trade off is you need two or more radios, with matching frequencies. WiFi and BT, on the other hand, are commonly included in computers and phones.
These radio modules come in four variants (two modulation types and two frequencies) The RFM69’s are easiest to work with, and are well known and understood. The LoRa radios are exciting and more powerful but also more expensive.
This is the LoRa radio module 433 MHz version!
We also carry a 900 MHz version here. These are +20dBm LoRa packet radios that have a special radio modulation that is not compatible with the RFM69s but can go much much farther. They can easily go 2 Km line of sight using simple wire antennas, or up to 20Km with directional antennas and settings tweakings
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU “Europe” license-free ISM or ITU “American” amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
- +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
- ~100mA peak during +20dBm transmit, ~30mA during active radio listening.
- Range of approx. 2Km, depending on obstructions, frequency, antenna and power output
All radios are sold individually and can only talk to radios of the same part number. E.g. RFM69 900 MHz can only talk to RFM69 900 MHz, LoRa 433 MHz can only talk to LoRa 433 MHz, etc.
Each radio comes with some header, a 3.3V voltage regulator and levelshifter that can handle 3-5V DC power and logic so you can use it with 3V or 5V devices. Some soldering is required to attach the header. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Optionally you can pick up a uFL or SMA edge-mount connector and attach an external duck.
雙頻無線傳輸模組
相關商品
-
38KHz 紅外線接收模組
0 滿分 5 分38KHz 紅外線接收模組/數位感測器模組/紅外線接收器 for Arduino 與樹莓派
Arduino 專用模組,端口與感測擴充板相容
38KHz 紅外接收頭,可接受各種紅外遙控信號NT$57NT$48 未稅加入購物車Quick View -
433Mhz RF link kit RF 無線接收發射傳輸模組 一對 相容Arduino
0 滿分 5 分RF 433Mhz 模組 發射接收一對
工作電壓(V):DC 5V
傳輸速率:<10KB/S
發射功率:25mW
工作電流:4mA
調製方式:調幅
工作溫度: -10 ℃ ~ 70 ℃
接收靈敏度(dBm):-105DB
工作頻率(MHz):433.92MHz
實測距離可以達40公尺(視實際環境有無干擾而定)NT$57NT$38 未稅加入購物車Quick View -
Grove – LoRa Radio 868MHz 無線射頻開發模組 seeed原廠
0 滿分 5 分Grove-LoRa Radio 868MHz的主要功能模塊是RFM98,它是一款採用LoRa遠程調製解調器的收發器,可提供超長距離擴頻通信且高抗干擾性,同時消耗微量電流.Grove-LoRa Radio 868MHz的核心處理器是ATmega168的,這是一種廣泛使用的芯片,具有很高的性能和低功耗,特別適用於這個Grove模塊。
NT$857NT$760 未稅加入購物車Quick View -
Grove – NFC Tag 近場通訊標籤模組 seeed原廠
0 滿分 5 分Grove – NFC Tag 是一款基於意法半導體M24LR64E-R集成解決方案的近場標籤模塊。通過I2C接口與主機通信,內建64位唯一識別碼同時集成了64Kbit EEPROM。模塊外擴了一個PCB天線,可以很方便安裝到您設計的結構中。
NT$848NT$700 未稅加入購物車Quick View -
加入購物車Quick View
NRF24L01+工業級遠距離升級版3.3V 2.4G無線收發模組
0 滿分 5 分加入購物車Quick View -
LoRa 無線傳輸模組 SX1278/1276 LoRa 8000m 擴頻技術 傳輸模組 1W(30dBm)含專用天線
0 滿分 5 分加入購物車Quick View -
Grove LoRa Radio 433MHz 無線射頻開發模組 seeed原廠
0 滿分 5 分Grove-LoRa Radio 433MHz的主要功能模塊是RFM98,它是一款採用LoRa遠程調製解調器的收發器,可提供超長距離擴頻通信且高抗干擾性,同時消耗微量電流.Grove-LoRa Radio 433MHz的核心處理器是ATmega168的,這是一種廣泛使用的芯片,具有很高的性能和低功耗,特別適用於這個Grove模塊。
NT$643NT$560 未稅加入購物車Quick View -
38khz 紅外線發射模組
0 滿分 5 分紅外線發射模組
◎ Arduino 專用模組,端口與感測擴充板相容
◎ 帶有發射狀態指示燈,方便測試
◎ 提供範例程式測試NT$71NT$48 未稅加入購物車Quick View -
Dragino LoRa Shield v95- 868M frequency Arduino Lora 擴展板 seeed原廠
0 滿分 5 分Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$800 未稅加入購物車Quick View -
Bluetooth 4.0 BLE CC2540 CC2541 藍芽模組 BLE4.0 帶底板
0 滿分 5 分NT$305NT$200 未稅加入購物車Quick View