
樹莓派 Zero W Camera Kit 相機套件 SparkFun原廠
該套件包含易於組裝和編程的部件,擴展了Raspberry Pi Zero W的IoT功能和高度定制的可訪問性Pi相機模塊。
- 商品說明
商品說明
樹莓派 Zero W Camera Kit 相機套件
SparkFun Raspberry Pi Zero W 相機套件 為您提供通過Raspberry Pi Zero W控制的雲台攝像頭。該套件包含易於組裝和編程的部件,擴展了Raspberry Pi Zero W的IoT功能和高度定制的可訪問性Pi相機模塊。使用Zero W相機套件,您可以創建自製的運動激活安全系統,用於流媒體的網絡攝像頭接口或任何數量的項目和冒險的監控站。經過幾步之後,您就可以隨時安裝遠程攝像頭系統!
在這個套件內,您需要組裝您的雲台相機,包括Raspberry Pi Zero W,我們自己的Pi Servo HAT,Raspberry Pi相機模塊V2,帶舵機的雲台支架,以及所有電纜和插頭需要把它們全部掛鉤。我們還編寫了一個深入的彙編指南,引導您完成每一步,將您的套件放在一起,以及使用Raspbian Jesse Image和圖書館的編程步驟。本指南可以在下面找到。
出貨清單
- 1x Raspberry Pi Zero W
- 1x SparkFun Pi Servo HAT
- 1x Raspberry Pi Camera Module V2
- 1x Raspberry Pi Zero Case w/ Short Camera Cable
- 1x Pan/Tilt Bracket Kit
- 1x Raspberry Pi Zero Camera Cable
- 1x Raspberry Pi GPIO Male Header – 2×20
- 1x Raspberry Pi GPIO Tall Header – 2×20
- 1x Double-Sided Foam Tap Square – 1in.
Documents
=========================================================
SparkFun Raspberry Pi Zero W Camera Kit
The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W. This kit consists of parts that are easy to assemble and program, expanding the Raspberry Pi Zero W’s IoT capabilities and highly tailored accessibility to the Pi Camera Module. With the Zero W camera kit, you will be able to create homemade motion-activated security systems, webcam interfaces for streaming, or monitoring stations for any number of projects and adventures. After just a few steps you’ll be set up in no time with your very own remote camera system!
Inside this kit is everything you need to assemble your pan/tilt camera, including a Raspberry Pi Zero W, our own Pi Servo HAT, a Raspberry Pi Camera Module V2, a pan/tilt bracket with servos, and all the cables and headers you need to hook them all up. We have also written an in-depth assembly guide that walks you through each step to put together your kit, as well as programming steps utilizing the Raspbian Jesse Image and libraries. This guide can be found below.
Note: The Pan/Tilt Bracket in this kit does not come pre-built, so some assembly is required. Check our Documents for a complete Assembly Guide.
Includes
- 1x Raspberry Pi Zero W
- 1x SparkFun Pi Servo HAT
- 1x Raspberry Pi Camera Module V2
- 1x Raspberry Pi Zero Case w/ Short Camera Cable
- 1x Pan/Tilt Bracket Kit
- 1x Raspberry Pi Zero Camera Cable
- 1x Raspberry Pi GPIO Male Header – 2×20
- 1x Raspberry Pi GPIO Tall Header – 2×20
- 1x Double-Sided Foam Tap Square – 1in.
Documents
相關商品
-
Interface Cable U.FL to SMA母頭 連接線 Sparkfun
0 滿分 5 分U.FL 轉 SMA接頭(母頭)連接器,附直徑 1.32 mm的電纜。 插入高達 6 GHz 的電纜損耗低於 -2 dB。 兩個連接頭均為鍍金黃銅,電纜導體為鍍銀銅。
-
樹莓派原廠 7吋觸控螢幕一體成形機殼 黑色外殼 Pi4B版本 英國製
0 滿分 5 分- 一體式外殼,組裝超容易。
- 可拆式後蓋,仍可以使用 GPIO。
本商品只有 樹莓派 觸控機殼套件 ,不含7吋觸控螢幕與樹莓派主板。
NT$857NT$600 未稅 -
Humidity Sensor Breakout-HIH-4030 濕度感測器 Sparkfun美國製
0 滿分 5 分這是霍尼韋爾HIH-4030濕度傳感器的分線板。HIH-4030測量相對濕度(%RH)並將其作為模擬輸出電壓輸出。 您可以將傳感器的輸出直接連接到微控制器上的ADC; 並且,由於傳感器接近線性電壓輸出,數據非常易於處理。
-
20×4 SerLCD – RGB Backlight (Qwiic)
0 滿分 5 分 -
Humidity and Temperature Sensor Breakout-Si7021 溫濕度感測器 Sparkfun美國製
0 滿分 5 分Si7021 是一款低成本,易於使用,高度精確的數字濕度和溫度感測器。該感測器非常適用於環境傳感和數據記錄,並非常適合構建氣象站或保濕控制系統。所有你需要的是用於I2C通信的兩條線路,你將擁有相對濕度讀數和非常準確的溫度讀數作為獎勵!
-
樹莓派原廠 Raspberry Pi 4B 電源供應器 , USB-C 接頭 5V / 3A / 15.3W 黑/白 隨機出貨
0 滿分 5 分- 5.1V / 3.0A DC output
- AC 100-240V 50/60 Hz input range
- Short circuit, overcurrent and over temperature protection
- 15.3W maximum output power
- 1.5m 18 AWG captive cable with USB-C output connector
-
樹莓派攝影鏡頭專用 CSI 排線 100CM 加長版特製 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 100CM 版本, 另有200CM,50CM ,跟 30CM 的版本。
本商品只有排線,不含樹莓派鏡頭模組 -
原廠英國製 Raspberry Pi Camera Moudule V2 樹莓派攝影模組 鏡頭模組
0 滿分 5 分Raspberry Pi Model A/B/B+/Pi2/Pi3/Pi4 皆可適用.
NT$1,190NT$900 未稅 -
樹莓派3 A+外殼 Raspberry Pi 3A+ 壓克力外殼 六片式組合
0 滿分 5 分樹莓派3 A+外殼 Raspberry Pi 3A+ 壓克力外殼 六片式組合
外殼的USB孔位有誤差,但仍可插入USB接頭正常使用,介意的請勿購買
NT$143NT$100 未稅 -
HMC6343 Breakout 電子羅盤模組
0 滿分 5 分HMC6343是一款完全集成的高端電子羅盤模塊,可以計算並在幾度內為您提供精確的航向。