
樹莓派 Zero W Camera Kit 相機套件 SparkFun原廠
該套件包含易於組裝和編程的部件,擴展了Raspberry Pi Zero W的IoT功能和高度定制的可訪問性Pi相機模塊。
- 商品說明
商品說明
樹莓派 Zero W Camera Kit 相機套件
SparkFun Raspberry Pi Zero W 相機套件 為您提供通過Raspberry Pi Zero W控制的雲台攝像頭。該套件包含易於組裝和編程的部件,擴展了Raspberry Pi Zero W的IoT功能和高度定制的可訪問性Pi相機模塊。使用Zero W相機套件,您可以創建自製的運動激活安全系統,用於流媒體的網絡攝像頭接口或任何數量的項目和冒險的監控站。經過幾步之後,您就可以隨時安裝遠程攝像頭系統!
在這個套件內,您需要組裝您的雲台相機,包括Raspberry Pi Zero W,我們自己的Pi Servo HAT,Raspberry Pi相機模塊V2,帶舵機的雲台支架,以及所有電纜和插頭需要把它們全部掛鉤。我們還編寫了一個深入的彙編指南,引導您完成每一步,將您的套件放在一起,以及使用Raspbian Jesse Image和圖書館的編程步驟。本指南可以在下面找到。
出貨清單
- 1x Raspberry Pi Zero W
- 1x SparkFun Pi Servo HAT
- 1x Raspberry Pi Camera Module V2
- 1x Raspberry Pi Zero Case w/ Short Camera Cable
- 1x Pan/Tilt Bracket Kit
- 1x Raspberry Pi Zero Camera Cable
- 1x Raspberry Pi GPIO Male Header – 2×20
- 1x Raspberry Pi GPIO Tall Header – 2×20
- 1x Double-Sided Foam Tap Square – 1in.
Documents
=========================================================
SparkFun Raspberry Pi Zero W Camera Kit
The SparkFun Raspberry Pi Zero W Camera Kit provides you with a pan/tilt camera controlled via a Raspberry Pi Zero W. This kit consists of parts that are easy to assemble and program, expanding the Raspberry Pi Zero W’s IoT capabilities and highly tailored accessibility to the Pi Camera Module. With the Zero W camera kit, you will be able to create homemade motion-activated security systems, webcam interfaces for streaming, or monitoring stations for any number of projects and adventures. After just a few steps you’ll be set up in no time with your very own remote camera system!
Inside this kit is everything you need to assemble your pan/tilt camera, including a Raspberry Pi Zero W, our own Pi Servo HAT, a Raspberry Pi Camera Module V2, a pan/tilt bracket with servos, and all the cables and headers you need to hook them all up. We have also written an in-depth assembly guide that walks you through each step to put together your kit, as well as programming steps utilizing the Raspbian Jesse Image and libraries. This guide can be found below.
Note: The Pan/Tilt Bracket in this kit does not come pre-built, so some assembly is required. Check our Documents for a complete Assembly Guide.
Includes
- 1x Raspberry Pi Zero W
- 1x SparkFun Pi Servo HAT
- 1x Raspberry Pi Camera Module V2
- 1x Raspberry Pi Zero Case w/ Short Camera Cable
- 1x Pan/Tilt Bracket Kit
- 1x Raspberry Pi Zero Camera Cable
- 1x Raspberry Pi GPIO Male Header – 2×20
- 1x Raspberry Pi GPIO Tall Header – 2×20
- 1x Double-Sided Foam Tap Square – 1in.
Documents
相關商品
-
原廠 樹莓派 4代 Raspberry Pi 4 Model B 8GB 開發板
0 滿分 5 分Raspberry Pi 4 Model B 是Raspberry Pi系列中的第四代產品,擁有運行速度為1.5GHz的64位四核處理器,雙頻2.4GHz和5GHz無線局域網,藍牙5.0 / BLE,真正的千兆以太網和PoE 通過單獨的PoE HAT提供的功能。
-
Sparkfun Environmental Sensor Breakout VOC氣體、溫濕度、氣壓多功能感測器-BME680 (Qwiic)美國製
0 滿分 5 分這款 SparkFun 環境感測器是Bosch 4合 1 BME680 氣體感測器的突破之作。
NT$1,000NT$760 未稅 -
Humidity and Temperature Sensor Breakout -HIH6130 溫濕度感測器 美國製
0 滿分 5 分HIH6130是一款數字輸出型相對濕度(RH)和溫度傳感器,採用相同的封裝。這樣可以對RH測量進行溫度補償,並提供第二個獨立的溫度傳感器輸出。
NT$1,143NT$960 未稅 -
樹莓派4代 Raspberry Pi 4B 電源供應器 5V/3A 帶開關按鈕 Type-C插頭
0 滿分 5 分- 名稱:5V / 3A 電源供應器
- 輸入:100-240V-50/60Hz 0.3A
- 輸出:5V / 3A
- 線長:1米
- 特點:帶開關按鈕
- 適用於:樹莓派4B開發板
NT$286NT$260 未稅 -
樹莓派原廠 Raspberry Pi 4B 電源供應器 , USB-C 接頭 5V / 3A / 15.3W 黑/白 隨機出貨
0 滿分 5 分- 5.1V / 3.0A DC output
- AC 100-240V 50/60 Hz input range
- Short circuit, overcurrent and over temperature protection
- 15.3W maximum output power
- 1.5m 18 AWG captive cable with USB-C output connector
-
20×4 SerLCD – RGB Backlight (Qwiic)
0 滿分 5 分 -
樹莓派3代 Raspberry Pi 3 Model B+開發板 Pi3B+ 英國製
0 滿分 5 分樹莓派 Raspberry Pi 是由英國樹莓派基金會(Raspberry Pi Foundation) 於 2012 年所推出的單板電腦(SBC, Single Board Computer),基於 ARM 架構,採用 Linux 系統(如:Debian、ArchLinux),大小只有一張信用卡大。
-
原廠英國製 Raspberry Pi Camera Moudule V2 樹莓派攝影模組 鏡頭模組
0 滿分 5 分Raspberry Pi Model A/B/B+/Pi2/Pi3/Pi4 皆可適用.
NT$1,190NT$900 未稅 -
樹莓派4代 Pi4B 鋁合金黑色鎧甲外殼 雙散熱風扇
0 滿分 5 分樹莓派4代(Raspberry Pi 4B)鋁合金外殼,帶雙風扇。樹莓派鎧甲外殼,黑色鎧甲加身,靜音雙風扇加持,靠實力高冷。貼芯導熱柱,散熱更快;巧妙孔位設計, 精准開孔;不影響WIFI和藍牙信號.
-
樹莓派原廠英國製 7吋觸控顯示器 Raspberry Pi Touch Display (800×480)
0 滿分 5 分本產品非人為因素故障保固3個月