TXB0104 電壓位準 I/O轉換板 4bit Sparkfun美國製

商品說明

TXB0104 電壓位準I/O轉換板-4bit

這是Texas Instruments TXB0104模塊的分線板。TXB0104是一款具有自動方向感應功能的4位雙向電壓電平轉換器。這個4位非反相轉換器使用兩個獨立的可配置電源軌。A端口旨在跟踪VCCA。VCCA接受1.2V至3.6V的任何電源電壓。B端口用於跟踪VCCB。VCCB接受1.65V至5.5V的任何電源電壓。這允許在1.2V，1.5V，1.8V，2.5V，3.3V和5V電壓節點之間進行通用的低壓雙向轉換。VCCA不應超過VCCB。我們已經打破了這個模塊上的每個引腳，您可以輕鬆訪問A和B端口。

特徵

• A端口為1.2V至3.6V，B端口為1.65V至5.5V（VCCA≤VCCB）
• VCC隔離功能 – 如果VCC輸入處於GND，所有輸出都處於高阻狀態
• OE輸入電路參考VCC
• 低功耗，5μA最大ICC

Documents

• 概要
• 鷹文件
• 數據表
• 連接指南
• GitHub函數庫與範例

 

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

 

Voltage-Level Translator Breakout – TXB0104

This is a breakout board for the Texas Instruments TXB0104 module. The TXB0104 is a 4-bit bidirectional voltage-level translator with automatic direction sensing.

This 4-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2V to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65V to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB. We have broken out each pin on this module for you to easily access both the A and B ports.

• 1.2V to 3.6V on A Port and 1.65V to 5.5V on B Port (VCCA ≤ VCCB)
• VCC Isolation Feature – If Either VCC Input Is at GND, All Outputs Are in the High-Impedance State
• OE Input Circuit Referenced to VCC
• Low Power Consumption, 5-μA Max ICC