FTDI Basic Breakout – 5V FT232RL晶片 SparkFun原廠
NT$695 NT$500 未稅
尚有庫存
- 商品說明
商品說明
FTDI Basic Breakout – 5V FT232RL晶片 美國 SparkFun 原裝進口
這是 Sparkfun FTDI Basic 的最新版本。我底部使用SMD 6針頭,這使得它更小更緊湊。功能一直保持不變。這是FTDI FT232RL USB串行IC的功能擴展板。該板的引腳排列與FTDI電纜匹配使用官方Arduino和副廠的5V Arduino板。它也可以用於一般串行應用。與該板的主要區別在於它引出DTR引腳,而不是FTDI電纜的RTS引腳。當下載新的草圖時,DTR引腳允許Arduino目標自動復位。這是一個非常好的功能,讓您可以下載草圖,而無需點擊重置按鈕。
標記為BLK和GRN的引腳對應於FTDI電纜上的有色導線。FTDI電纜上的黑線為GND,綠色為CTS。使用這些BLK和GRN引腳將FTDI基板與Arduino目標對齊。該電路板具有TX和RX LED,通過FTDI電纜可以更好地使用。您實際上可以看到LED上的串行流量,以驗證電路板是否正常工作。該板旨在降低Arduino開發成本,並提高易用性(自動重置功能!)。我們的Arduino Pro板和LilyPads使用這種類型的連接器。該板的一個很好的功能是板背面的跳線,允許將板配置為3.3V或5V(電源輸出和IO電平)。該闆卡默認為5V,但如果需要切換到3.3V,則可以切斷默認軌跡並添加焊接跳線。
Document
=========================================================
SparkFun FTDI Basic Breakout – 5V
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows an Arduino target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of Arduino development and increase ease of use (the auto-reset feature rocks!). Our Arduino Pro boards and LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
Documents:
- Schematic
- Eagle Files
- USB to serial UART Boards Hookup Guide
- How to Install FTDI Drivers
- FTDI Drivers
- GitHub (Design Files)
相關商品
-
Sensor Shield V5.0 感測器擴展板 支援Arduino單機片
0 滿分 5 分最新推出的Sensor Shield V5.0 感測器擴展板,採用疊層設計,主板不僅將 Arduino Uno 的全部 Digital 與 Ananog pins 擴展出來,還特設 IIC 接口、舵機控制器接口、藍芽模組通信接口、SD 卡模組通信接口、APC220 無線射頻模組通信接口、超聲波感測器接口、12864液晶串列與並行接口,獨立擴出更加易用方便。對於 Arduino 初學者來說,不必為繁瑣複雜電路連線而頭疼了,這款感測器擴展板真正意義上的將電路簡化,能夠很容易地將常用感測器連接起來,一款感測器僅需要一種通用3P感測器連接線(不分數字連接線與模擬連接線),完成電路連接後,編寫相應的Arduino程序下載到Arduino 控制器中讀取感測器數據、或者接收無線模組回傳數據,經過運算處理,最終輕鬆完成你自己的互動作品。
NT$124NT$80 未稅加入購物車Quick View -
ADS1115 四通道 超小型16位精密模數轉換器(ADC) 開發板模組
0 滿分 5 分NT$295NT$200 未稅加入購物車Quick View -
MEGA 感測器擴展板 V2.4 Arduino通用 Xbee 藍芽串口 SD卡座 DFRobot原廠
0 滿分 5 分NT$743NT$560 未稅加入購物車Quick View -
加入購物車Quick View
Gravity: CH423 I2C 24位元 數位IO擴展模組 DFRobot原廠
0 滿分 5 分加入購物車Quick View -
UNO Proto Shield ProtoShield 原型擴展板 含麵包板
0 滿分 5 分ProtoShield原型擴展板上帶兩個LED和兩個按鈕電路,可以直接使用,全部引腳和電源均已引出,非常適合和Arduino配合構建電路原型。
NT$114NT$80 未稅加入購物車Quick View -
WIFI ESP8266 模組轉接板 ESP-07 ESP-08 ESP-12 (不含模組)
0 滿分 5 分NT$48NT$29 未稅加入購物車Quick View -
9V DC 電源供應器 變壓器 Arduino外接電源 100V~240V AC轉DC 9V1A 穩壓電路
0 滿分 5 分輸入電壓:AC(交流)100V-240V 50-60Hz
輸出電壓:DC(直流)9V
額定輸出電流:1A
輸出DC介面:外徑5.5mm內徑2.1mm
插頭極性:內正外負
產品優勢:採用全新線路板以及元器件NT$114NT$100 未稅加入購物車Quick View -
4G LTE 7S4 擴展板 RS232轉GPRS 開發擴展板 附贈電源供應器
0 滿分 5 分NT$933NT$838 未稅加入購物車Quick View -
CP2102 多功能串口轉換模組 USB 轉 TTL,RS485,RS232互轉 支援3.3V/5V 切換,支援Win 7/8/10
0 滿分 5 分CP2102 多功能串口轉換模組 USB 轉 TTL,RS485,RS232互轉 支援3.3V/5V 切換
全面支持Win8,Win7,WinXp, Win2K,WinCE,Linux,Mac,系統,32位、64位系統,最新驅動全面支持
出廠時撥碼開關已撥到全ON位置,經過測試能夠適應所有模式
NT$238NT$180 未稅加入購物車Quick View -
副廠 Esplora 遊戲機開發控制板 GamePad 採用原廠晶片支援Arduino
0 滿分 5 分Esplora 是 Leonardo 的增強版,控制晶片依舊採用Leonardo用的Atmega32U4,可以直接控制USB與上位機的通信,模擬PC機的鍵盤和鼠標等外設。Esplora最突出的特性是增加了幾個內建的輸入設備和傳感器,還有幾個輸入輸出接口。
NT$848NT$790 未稅加入購物車Quick View