Arduino ETHERNET SHIELD 2 義大利原廠乙太網路擴展板 2代 不含POE模組

-17%

Arduino ETHERNET SHIELD 2 義大利原廠乙太網路擴展板 2代 不含POE模組

NT$1,135 NT$940 未稅

義大利原廠 Arduino 乙太網路擴展板 2代 不含POE模組

Arduino Ethernet Shield 2 connects your Arduino board to the internet.

Plug The Arduino Ethernet Shield 2 module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. The Shield has a Power over Ethernet (PoE) module designed to extract power from a conventional Ethernet cable.

尚有庫存

  • 商品說明
  • 評論 (0)
  • 交流討論

商品說明

Arduino Ethernet Shield 2 connects your Arduino board to the internet.

義大利原廠 Arduino 乙太網路擴展板 2代 不含POE模組

Plug The Arduino Ethernet Shield 2 module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. The Shield has a Power over Ethernet (PoE) module designed to extract power from a conventional Ethernet cable.

 

原廠規格書下載 https://www.amazon.com/clouddrive/share/7a0FJKLkPtkM9s0OUNJNlr3gXvPxtFZo75HTkjnuPC8?ref_=cd_ph_share_link_copy

Arduino Ethernet Shield 2 with/without PoE

The Arduino Ethernet Shield 2 comes in 2 versions: one with PoE (8732294) and one without PoE (8732285). The shields have been designed to integrate rapid internet connection into designs that use Arduino boards. Other shields can be stacked right on top of the ethernet shield, allowing for optimum functionality integration in designs. Both shields feature the Wiznet W5500 ethernet chip that provide an IP stack that supports TCP and UDP protocols. The W5500 also supports up to 8 socket connections at once.

How is version 2 different to previous versions?
Version 2 features an on-board microSD card slot as a pose to a standard size SD card.The upgraded version 2 also has a higher Arduino board compatibility — the previous version does not support the Mega board.

What do I need to use this version 2 shield?
All you need is an Arduino board, a 5 V operating voltage (this will come from the Arduino board), an ethernet controller, 10/100 Mb connection speed and and connection with an Arduino via an SPI port.

Features & Benefits of the Ethernet Shield 2
•W5500 ethernet chip
•Dimensions: 2.7 x 2.1 ins
•MicroSD card slot/card reader
•Re-set controller
•RJ45 ethernet jack
•5 status LEDs
You can download the new Arduino IDE at arduino.org/downloads

Arduino Shields & Add-On Boards

Our range of shields and add-on boards can add the extra functionality you need by attaching on top of or plugging into an Arduino board. Functionality ranges from adding motion sensing, power management, motors and displays to connecting your devices via Ethernet, GSM, WiFi and USB. There are also options for more flexible prototyping

商品評論

目前沒有評論。


搶先評論 “Arduino ETHERNET SHIELD 2 義大利原廠乙太網路擴展板 2代 不含POE模組”