X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 無線射頻模組
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 RF 無線射頻模組
X-NUCLEO-IDS01A4是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模塊SPSGRF-868,該模塊工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。ST公司同時也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,降低了開發門檻,方便用戶在不同MCU系列中進行程序移植。
- 商品說明
商品說明
X-NUCLEO-IDS01A4 STM32 Nucleo 擴展板- SPSGRF-868 RF 無線射頻模組
X-NUCLEO-IDS01A4 是ST公司推出的一款針對STM32 Nucleo設計的射頻擴展板,兼容Arduino UNO R3接口,通過SPI和GPIO與MCU進行通信。 採用SPIRIT射頻模塊SPSGRF-868,該模塊工作在868MHz的ISM頻段,集成巴倫與片上天線,通過ETSI認證。ST公司同時也提供了STM32Cube的軟件擴展包X-CUBE-SUBG1,降低了開發門檻,方便用戶在不同MCU系列中進行程序移植。
The X-NUCLEO-IDS01A4 is an evaluation board based on the SPIRIT1 RF module SPSGRF-868 expansion of STM32 Nucleo boards. The SPSGRF-868 module operates in the 868 MHz ISM band and is ETSI certified. Identification of the operating frequency of the X-NUCLEO-IDS01Ax (x=4 or 5) is performed through two resistors (R14 and R15). It is compatible with the MORPHO and Arduino UNO R3 connector layout. The X-NUCLEO-IDS01A4 interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
Key Features
- STM32 Nucleo expansion board based on the SPSGRF-868
- SPGRF-868 characteristics:
- 868 MHz ETSI-certified module based on low power, low data-rate sub-1 GHz SPIRIT1 transceiver
- Integrated Balun (BALF-SPI-01D3)
- Chip antenna
- Compatible with STM32 Nucleo boards
- Equipped with Arduino UNO R3 connectors
- Scalable solution; capable of cascading multiple boards for larger systems
- Example firmware for point-to-point communication, compatible with STM32Cube firmware
- RoHS compliant
相關商品
-
加入購物車Quick View
NUCLEO-F103RB STM32F103RB 128K Mbed 開發板 原裝意法半導體進口 Arduino 相容腳座
0 滿分 5 分NUCLEO-F103RB STM32F103RB 128K Mbed 開發板 原裝意法半導體進口 Arduino 相容腳座
STM32 Nucleo-64開發板採用 STM32F103RB MCU,支持Arduino和ST形態連接。STM32 Nucleo板為用戶提供了一種經濟實惠且靈活的方式,可以從STM32微控制器中嘗試新的概念並構建原型,從性能,功耗和功能的各種組合中進行選擇。Arduino™Uno V3連接支持和ST morpho頭部允許輕鬆擴展STM32 Nucleo開放平台的功能
加入購物車Quick View -
Wemos D1 mini V3.0.0 (4Mb) WIFI 物聯網開發板 基於ESP8266兼容Nodemcu
0 滿分 5 分NT$267NT$220 未稅加入購物車Quick View -
NodeMcu Lua WIFI V3 物聯網 開發板 ESP8266 wifi模組 接口 CH-340
0 滿分 5 分NT$171NT$100 未稅加入購物車Quick View -
加入購物車Quick View
副廠 DUE R3 ARM 32位 開發板 (完全相容 Arduino) / Atmel SAM3X8E / 附 micro USB線
0 滿分 5 分Arduino Due 是一塊基於 Atmel SAM3X8E CPU的微控制器板.它是第一塊基於32位ARM的Arduino. 和之前的ArduinoMega非常類似,它有54個數字IO口(其中12個可用於PWM輸出),12個模擬輸入口,4路UART硬件串口。但是它的時鐘頻率達到84 MHz, 還有一個USB OTG接口, 兩路DAC(模數轉換),兩路TWI。Arduino Due最大的變化是它的工作電壓為3.3V。IO口可承載電壓也為3.3V。因此它不兼容原來的為5V設計的Shield和外設。不恰當的連接5V電源和外設可能會燒燬Arduino DUE,請在使用前檢查好電壓。
加入購物車Quick View -
加入購物車Quick View
X-NUCLEO-IDB05A1 EXPANSION BOARD, 藍芽擴充板 BLUETOOTH LOW ENERGY
0 滿分 5 分The X-NUCLEO-IDB05A1 is a Bluetooth low energy expansion board based on the SPBTLE-RF module for STM32 Nucleo. The X-NUCLEO-IDB05A1 is a Bluetooth Low Energy evaluation board based on the SPBTLE-RF BlueNRG-MS RF module to allow expansion of the STM32 Nucleo boards. The SPBTLE-RF module is FCC (FCC ID: S9NSPBTLERF) and IC certified (IC: 8976C-SPBTLERF). The X-NUCLEO-IDB05A1 is compatible with the ST Morpho and Arduino UNO R3 connector layout. The X-NUCLEO-IDB05A1 interfaces with the STM32 microcontroller via the SPI pin and the user can change the default SPI clock, the SPI chip select and SPI IRQ by changing one resistor on the evaluation board.
加入購物車Quick View -
X-NUCLEO-IDW01M1 WiFi 擴展板 SWPF01SA module STM32 Nucleo
0 滿分 5 分X-NUCLEO-IDW01M1 Wi-Fi擴展板SWPF01SA module STM32 Nucleo
Expansion Boards 用於:STM32 Nucleo 核心:ARM Cortex M3 數據匯流排寬度:32 bit 描述/功能:Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo 接口。
- 產品: Expansion Boards
- 用於: STM32 Nucleo
- 核心: ARM Cortex M3
- 數據匯流排寬度: 32 bit
- 描述/功能: Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo
- 接口類型: UART
- 最高工作溫度: + 85 C
- 最低工作溫度: – 40 C
- 系列: STM32 NUCLEO
- 評估工具: SWPF01SA
加入購物車Quick View -
STM32 Nucleo-144 Board F429ZI 2M Flash 開發板
0 滿分 5 分NT$1,800NT$1,220 未稅加入購物車Quick View -
NodeMCU-32S WiFi 物聯網開發板 相容ESP-32S 提供WiFi+藍牙 CH340版本
0 滿分 5 分WiFi+藍牙4.2+BLE/雙核CPU/Lua語言/像Arduino一樣操作硬件IO/用 Nodejs 類似語法寫網絡應用/超高性能、低成本的WiFi+藍牙模組「ESP-32S」NodeMCU 是一個開源的物聯網平台。它使用Lua腳本語言編程。該平台基於eLua開源項目。「NodeMCU-32S」基於ESP-32S模組。該平台使用了很多開源項目,例如lua-cjson, spiffs. 「NodeMCU-32S」包含了可以運行在ESP32 Wi-Fi SoC芯片之上的固件,以及基於ESP-32S模組的硬件。ESP32是上海Espressif研發的WiFi+藍牙芯片,旨在為嵌入式類產品提供接入網絡的功能。
NT$286NT$180 未稅加入購物車Quick View -
X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
0 滿分 5 分X-NUCLEO-IDS01A5 STM32 Nucleo 擴展板- SPSGRF-915 無線射頻模組
The X-NUCLEO-IDS01A5 is an evaluation board based on SPIRIT1 RF module SPSGRF-915 to allow expansion of STM32 Nucleo boards. The SPSGRF-915 module operates in the 915 MHz ISM band and is FCC certified (FCC ID: S9NSPSGRF) and IC certified (IC:8976C-SPSGRF). Identification of the operating frequency of the X-NUCLEO-IDS01Ax (x= 4 or 5) is performed through two resistors (R14 and R15). It is compatible with the ST Morpho and Arduino UNO R3 connector layout. The X-NUCLEO-IDS01A5 interfaces with the STM32 microcontroller via SPI connections and GPIO pins. The user can change some of the GPIOs by mounting or removing the resistors.
NT$848NT$720 未稅加入購物車Quick View -
X-NUCLEO-IKS01A2 MEMS及環境傳感器擴展板
0 滿分 5 分X-NUCLEO-IKS01A2 MEMS及環境傳感器擴展板
Motion MEMS and environmental sensor expansion board for STM32 Nucleo
X-Nucleo-IKS01A2與X-Nucleo-IKS01A1在接口上完全一致,採用Arduino UNO R3接口與其他Nucleo板相連。X-Nucleo-IKS01A2採用了全新的三軸加速度計加三軸陀螺儀(A+G),三軸加速度加三軸磁力計(A+M)以及MEMS氣壓計,所有傳感器通過同一I2C接口與主控板相連。保留了DIL24socket,便於評測其他型號的傳感器。NT$933NT$800 未稅加入購物車Quick View