NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
NT$800 未稅
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
尚有庫存
- 商品說明
商品說明
NUCLEO-L073RZ mbed 開發板 Arduino 相容腳座
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features.
The Arduino™ connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer.
Microcontroller features
- STM32L073RZT6 in LQFP64 package
- ARM®32-bit Cortex®-M0+ CPU
- 32 MHz max CPU frequency
- VDD from 1.65 V to 3.6 V
- 192 KB Flash
- 20 KB SRAM
- GPIO (51) with external interrupt capability
- General purpose Timers (4)
- Basic Timers (2)
- Low-power Timer
- SPI (2)
- I2S
- I2C (3)
- USART (4)
- Low-power UART
- USB 2.0 full-speed
- 12-bit ADC with 16 channels
- 12-bit DAC (2) with 1 channel each
- LCD
- Comparators (2)
- RTC
- Capacitive sensing channels (24)
- Random Generator (TRNG for HW entropy)
Nucleo features
- Two types of extension resources
- Arduino Uno Revision 3 connectivity
- STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
- On-board ST-LINK/V2-1 debugger/programmer with SWD connector
- Selection-mode switch to use the kit as a standalone ST-LINK/V2-1
- Flexible board power supply
- USB VBUS or external source (3.3 V, 5 V, 7 – 12 V)
- Power management access point
- User LED (LD2)
- Two push buttons: USER and RESET
- USB re-enumeration capability: three different interfaces supported on USB
- Virtual Com port
- Mass storage (USB Disk drive) for drag’n’drop programming
- Debug port
Nucleo pinout
Arduino-compatible headers
Morpho headers
These headers give access to all STM32 pins.
相關商品
-
X-NUCLEO-IDW01M1 WiFi 擴展板 SWPF01SA module STM32 Nucleo
0 滿分 5 分X-NUCLEO-IDW01M1 Wi-Fi擴展板SWPF01SA module STM32 Nucleo
Expansion Boards 用於:STM32 Nucleo 核心:ARM Cortex M3 數據匯流排寬度:32 bit 描述/功能:Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo 接口。
- 產品: Expansion Boards
- 用於: STM32 Nucleo
- 核心: ARM Cortex M3
- 數據匯流排寬度: 32 bit
- 描述/功能: Wi-Fi expansion board based on SWPF01SA module for STM32 Nucleo
- 接口類型: UART
- 最高工作溫度: + 85 C
- 最低工作溫度: – 40 C
- 系列: STM32 NUCLEO
- 評估工具: SWPF01SA
加入購物車Quick View -
加入購物車Quick View
X-NUCLEO-IDB05A1 EXPANSION BOARD, 藍芽擴充板 BLUETOOTH LOW ENERGY
0 滿分 5 分The X-NUCLEO-IDB05A1 is a Bluetooth low energy expansion board based on the SPBTLE-RF module for STM32 Nucleo. The X-NUCLEO-IDB05A1 is a Bluetooth Low Energy evaluation board based on the SPBTLE-RF BlueNRG-MS RF module to allow expansion of the STM32 Nucleo boards. The SPBTLE-RF module is FCC (FCC ID: S9NSPBTLERF) and IC certified (IC: 8976C-SPBTLERF). The X-NUCLEO-IDB05A1 is compatible with the ST Morpho and Arduino UNO R3 connector layout. The X-NUCLEO-IDB05A1 interfaces with the STM32 microcontroller via the SPI pin and the user can change the default SPI clock, the SPI chip select and SPI IRQ by changing one resistor on the evaluation board.
加入購物車Quick View -
加入購物車Quick View
NUCLEO-F401RE STM32F401RE 開發板 原裝意法半導體進口
0 滿分 5 分NUCLEO-F401RE STM32F401RE 開發板 原裝意法半導體進口
STM32 Nucleo開發板具有mbed功能,支持Arduino接口,同時還提供ST Morpho擴展排針,可連接微控制器的所有周邊外設。作為一個具有mbed功能的電路板,STM32 Nucleo開發板讓開發人員能夠利用mbed開源軟件平台、在線工具和mbed.org的合作基礎設施開發創新應用。
加入購物車Quick View -
STM32F103C8T6 小系統板 單片機 核心板 STM32開發板 ARM
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
NUCLEO-F446RE STM32F446RE Mbed 開發板 原裝意法半導體進口
0 滿分 5 分加入購物車Quick View -
ODYSSEY-STM32MP135D 內建4GB eMMC 開發板 Cortex-A7 STM32 / 4Gb / PoE
0 滿分 5 分這是新一款緊湊型STM32 單片機開發板,支持多種操作系統並提供多種連接,具有高效的數據傳輸和靈活的供電、並有可擴充的存儲容量。
NT$1,810NT$1,600 未稅加入購物車Quick View -
升級版 6軸機械手臂 開發套件組 6DOF Robot ARM
0 滿分 5 分6軸機械人手臂開發套件被廣泛應用於教學領域,適合個人DIY 制作以及學校創意項目之中,可以把它看作是一個簡單的多軸機械手臂演示平台,它的動力系統由6個伺服電機組成,可以實現機械手的前後、上下及左右抓取搬運的演示。所以支架配件均采用2mm厚度的鋁板,從而有效的提高了機械手自身的穩定性,舵機配MG996大扭力金屬舵機,使輸出更加穩定,轉向關節處均採用進口杯式軸承,不僅可以使轉向更加靈活,而且還可以使舵機的轉向在同一圓心。
NT$2,857NT$2,200 未稅加入購物車Quick View -
新版STM32F103C8T6 (103C6T6) 核心板 STM32開發板 原廠晶片 ARM嵌入式單片機 相容Arduino
0 滿分 5 分皆已焊針腳
加入購物車Quick View -
加入購物車Quick View
副廠 DUE R3 ARM 32位 開發板 (完全相容 Arduino) / Atmel SAM3X8E / 附 micro USB線
0 滿分 5 分Arduino Due 是一塊基於 Atmel SAM3X8E CPU的微控制器板.它是第一塊基於32位ARM的Arduino. 和之前的ArduinoMega非常類似,它有54個數字IO口(其中12個可用於PWM輸出),12個模擬輸入口,4路UART硬件串口。但是它的時鐘頻率達到84 MHz, 還有一個USB OTG接口, 兩路DAC(模數轉換),兩路TWI。Arduino Due最大的變化是它的工作電壓為3.3V。IO口可承載電壓也為3.3V。因此它不兼容原來的為5V設計的Shield和外設。不恰當的連接5V電源和外設可能會燒燬Arduino DUE,請在使用前檢查好電壓。
加入購物車Quick View -
BeagleBone Green Wireless 狗骨頭無線版 Wi-Fi + Bluetooth Low Energy
0 滿分 5 分BeagleBone Green Wireless 狗骨頭無線版 Wi-Fi + Bluetooth Low Energy
板載了2.4GHz 2×2 MIMO Wi-Fi和低功耗藍牙模塊的BeagleBone Green Wireless。對於物聯網開發者來說,它或許是比樹莓派3更加合適的硬體平台。值得一提的是,TI WiLinkTM8支持AP和STA模式,在配置無線網絡的時候會相當給力;而它的藍牙模塊也支持A2DP,可用於音頻自動化和立體聲傳輸。
加入購物車Quick View