Name: GY-BME280-3.3 高精度 大氣壓感測器模組 高度計
SKU: 615142116(A2-18)
Price: 210 TWD
Availability: InStock

查看購物車 “JY-61 MPU6050 6軸 Kalman Filter 卡爾曼濾波模組 (3軸加速計+3軸陀螺儀)” 已加入您的購物車

-33%

GY-BME280-3.3 高精度大氣壓感測器模組高度計

~~NT$300~~ NT$200 未稅

GY-BME280-3.3 大氣壓感測器 對比上一代 BMP280氣壓傳感器產品，BME280 除了氣壓、溫度功能，還可直接輸出濕度數據。為客戶提供戶外應用環境，提供天氣預報數據等。濕度反應速度不但快速，同時精度可達3%；溫度數據精度也可達到0.01℃，特別適合穿戴戶外產品

尚有庫存

貨號： 615142116(A2-18) 分類：運動與位置感測器標籤： BME280, 大氣壓力, 高度

商品說明

• 氣壓濕度計 Barometer / Temperature & Humidity sensor
• 封裝: 8pin LGA
• 接口: IC², SPI
• 功耗: 2.8uA（氣壓）/ 1.8uA（濕度）
• 工作溫度: -40℃～ +85℃

GY-BME280-3.3 大氣壓感測器對比上一代 BMP280氣壓傳感器產品，BME280 除了氣壓、溫度功能，還可直接輸出濕度數據。為客戶提供戶外應用環境，提供天氣預報數據等。濕度反應速度不但快速，同時精度可達3%；溫度數據精度也可達到0.01℃，特別適合穿戴戶外產品

特點

BME280 is a Breakout Board featuring a Temperature, Humidity & Pressure Sensor.
The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.
Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 10k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO.
If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1!
Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V

The BME280 is the next generation of sensors, and is the upgrade to the BMP085/BMP180/BMP183 – with a low altitude noise of 0.25m and the same fast conversion time. It has the same specifications, but can use either I2C or SPI. For simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI.