DS18B20 測溫傳感器 模組 for For WeMos D1 mini 溫度感測器模組
NT$80 未稅
DS18B20 測溫傳感器模組 for For WeMos D1 mini 溫度感測器模組
尚有庫存
- 商品說明
商品說明
DS18B20 測溫傳感器 模組 for For WeMos D1 mini 溫度感測器模組
DS18B20 測溫傳感器 產品特點:
- 配套D1 MINI使用
- Arduino 兼容,使用Arduino IDE進行編程
- 11XI/O引腳
- 1XADC引腳(輸入0-3.3V)
- 支持OTA上線
發貨清單(靜電袋包裝):
1.長型排母X2PCS
2.短型排母X2PCS
3.普通排針X2PCS
4.DS18B20測溫模塊(FOR D1-MINI)X1PCS
DS18B20 測溫傳感器
引腳定義(DS18B20測溫模塊VCC與GND連接D1 MINI主板,佔用數據IO口為D2):
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by definition requires only one data line (and ground) for communication with a central micro-processor. In addition, the DS18B20 can derive power directly from the data line (?parasite power?), eliminating the need for an external power supply.
Each DS18B20 has a unique 64-bit serial code, which allows multiple DS18B20s to function on the same 1-Wire bus. Thus, it is simple to use one microprocessor to control many DS18B20s distributed over a large area. Applications that can benefit from this feature include HVAC environmental controls, temperature monitoring systems inside buildings, equipment, or machinery, and process monitoring and control systems.
Features
-
- Unique 1-Wire® Interface Requires Only One Port Pin for Communication
- Reduce Component Count with Integrated Temperature Sensor and EEPROM
- Measures Temperatures from -55°C to +125°C (-67°F to +257°F)
- ±0.5°C Accuracy from -10°C to +85°C
- Programmable Resolution from 9 Bits to 12 Bits
- No External Components Required
- Parasitic Power Mode Requires Only 2 Pins for Operation (DQ and GND)
- Simplifies Distributed Temperature-Sensing Applications with Multidrop Capability
- Each Device Has a Unique 64-Bit Serial Code Stored in On-Board ROM
- Flexible User-Definable Nonvolatile (NV) Alarm Settings with Alarm Search Command Identifies Devices with Temperatures Outside Programmed Limits
Lieferumfang
1x WeMos DS18B20 Shield für D1 mini
2x Stiftleiste kurz
2x Buchsenleiste kurz
2x Buchsenleiste lang
相關商品
-
加入購物車Quick View
Micro SD Shield for D1 mini wifi 記憶卡擴展底板
0 滿分 5 分加入購物車Quick View -
DS18B20 溫度感測器 IC18B20 直插三極管TO-92
0 滿分 5 分NT$48NT$20 未稅加入購物車Quick View -
WeMos D1 Mini Pro wifi 開發板15件學習套件 基於 ESP8266 NodeMcu Lua
0 滿分 5 分NT$1,190NT$940 未稅加入購物車Quick View -
100cm長度 / 1米防水探針型熱電偶溫度感測器 不銹鋼封裝 防水型 DS18b20溫度感測器
0 滿分 5 分本款溫度感測器支援兩線寄生方式,也就是不用外部供電只需要兩線工作,把晶片電源VCC和地腳GND短接為一根線,另一根接信號線DATA即可使用。
優質不銹鋼管封裝 防水防潮防生鏽,探頭採用原装DS18B20溫度傳感器晶片,每個引腳均用熱縮管隔開,防止短路,內部封膠,防水防潮,優質不銹鋼管封裝防生鏽
NT$95NT$60 未稅加入購物車Quick View -
Weather Shield 天氣感測擴展板 SparkFun原廠
0 滿分 5 分SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。
NT$1,714NT$1,380 未稅加入購物車Quick View -
LOLIN (WeMos) D1 WiFi Arduino UNO 開發板ESP8266 ESP-12F 直接用 Arduino IDE 開發
0 滿分 5 分WeMos D1 WiFi Arduino UNO 開發板 物聯網應用開發板
- 微控制器:ESP-8266EX
- WIFI頻率:2.4GHz
- IEEE 802.11 b / g / n
- WiFi功率放大器(PA):+25dBm
- 輸入介面:Micro USB
- 工作電壓:3.3V
- 時脈:80 / 160 MHz
- 數位I/O PIN:11支接腳
- 類比輸入PIN:1支接腳
- FLASH:4MB
- DC O2.1mm插孔
- Arduino兼容,使用Arduino IDE來編程,
- 支援OTA無線上傳
- 板載5V 1A開關電源 (最高輸入電壓24V)
- 安裝後,直接用Arduino IDE 開發,跟Arduino UNO 一樣操作
NT$286NT$200 未稅加入購物車Quick View -
加入購物車Quick View
Dual Base for wemos mini D1 pro 擴展底板
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
Battery Shield For WeMos D1 mini 單節鋰電池充電 電池升壓屏蔽
0 滿分 5 分Battery Shield V1.1.0 For WeMos D1 mini 單節鋰電池充電和電池升壓屏蔽
Battery Shield V1.1.0 For WeMos D1 mini & D1 mini pro single lithium battery charging & boost
搭配本擴展板, 您可以將 D1 mini 放在任何地方,使用此電池升壓+ 18650 單節鋰電池或103450鋰電池擴展模組
- 18650103450 為 3.3v 而 D1 mini pro 需要 5V, 本擴展板具備升壓功能,只需將鋰電池連接到該屏蔽層,為整個D1迷你係統提供電源。
- 充電時,當電池電量耗盡時,您不需要拔掉電池,只需使用usb端口進行充電。
加入購物車Quick View -
Battery Shield V1.2.0 For WeMos D1 mini 單節鋰電池充電 電池升壓屏蔽
0 滿分 5 分- 18650/103450 為 3.3v 而 D1 mini pro 需要 5V, 本擴展板具備升壓功能,只需將鋰電池連接到該屏蔽層,為整個D1迷你係統提供電源。
- 充電時,當電池電量耗盡時,您不需要拔掉電池,只需使用usb端口進行充電。
NT$143NT$120 未稅加入購物車Quick View -
加入購物車Quick View
OLED Shield for WeMos D1 mini 0.66″ inch 64X48 IIC I2C 擴展板
0 滿分 5 分OLED Shield for WeMos D1 mini 0.66″ inch 64X48 IIC I2C 擴展板
64×48像素(0.66“交叉)OLED屏蔽帶 I2C
- 屏幕尺寸: 64×48像素(0.66“橫向)
- 工作電壓: 3.3V
- 驅動IC: SSD1306
- 接口: IIC(I2C)
- IIC地址: 0x3C或 0x3D
加入購物車Quick View