CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
NT$762 NT$680 未稅
尚有庫存
- 商品說明
商品說明
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 等開發板
CAN-BUS Shield V2.0 是專為Arduino控制器設計的擴展板,板載MCP2515匯流排控制晶片能夠實現CAN匯流排上的資料控制,實現設備與設備之間的資料通信。擴展板相容Arduino標準卡槽,可以完美適配於Arduino UNO,Leonardo等主控板。並且提供一個DB9和一個接線柱形式的介面,您可以根據需要自主選擇介面。內嵌MicroSD卡槽,可直插MicroSD卡,存儲資料。多種擴展介面使得用戶在DIY過程中得到更大的便利。
接口說明
兩種供電方式:
Power Switch處於“ON”端,電源由DB9接口的供電
Power Switch處於“OFF”端,電源由Arduino主板供應
注意:
- 當DP9接口處的電壓大於7V時可以為arduino主控板供電,開關選擇”ON“;
- 如果arduino主板是usb供電,那麼USB和DB9可以同時供電;如果arduino是DC-Vin電源供電,DB9就不能同時供電了,必須將開關置於”OFF“處
特徵
- 支持標準幀、擴展幀收發,支持輪訓和中斷兩種接收方式
- 提供uart、I2C、DB9及接線柱等多種接口
- 支持SD卡數據存儲
- 支持Arduino主板供電以及DB9接口供電
規格
- 芯片:MCP2515
- 供電:3.3~5VDC Arduino 主板供電/DB9接口供電
- 尺寸:76 mm * 54mm *19mm
- 重量:40g
出貨清單
- CAN-BUS Shield V2.0 x1
- 排針x1
Documents
=========================================================
CAN BUS Shield for Arduino
This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNO, Leonardo or MEGA board.The shield integrates an MCP2515 CANBUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device.
There is also an integrated MicroSD socket for data storage – a perfect solution for data logging applications.
What is Canbus? Controller Area Network (CAN bus) is a vehicle bus standard designed to allow microcontrollers and devices to communicate with each other in applications without a host computer. It is a message-based protocol, designed originally for multiplex electrical wiring within automobiles, but is also used in many other contexts.
FEATURES
- Supports standard frame, extended frame transmitting and receiving
- Supports two reception methods: Rotational and interrupt detection
- Supports UART, i2C and DB9 terminal interfaces
- Supports SD card data storage
- Supports Arduino mainboard power supply or DB9 power supply (Switch)
SPECIFICATION
- Chip: MCP2515
- Power supply: 3.3 ~ 5V Arduino board power supply or DB9 interface power supply
- Dimension: 76x54x19 (mm)/ 2.99×2.12×0.75 inches
- Weight: 40g
DOCUMENTS
SHIPPING LIST
- CAN-BUS Shield V2.0 x1
- 8-Pin header x1
相關商品
-
Micro:bit Breakout GPIO擴展板 腳位全引出 SparkFun原廠
0 滿分 5 分NT$267NT$240 未稅加入購物車Quick View -
Grove – I2C Hub IIC/IO 擴展模組 seeed原廠
0 滿分 5 分I2C Hub Grove是一個擴展 Grove模塊,用於將多個I2C模組或感測器連接到Grove Base Shield。它可以連接最多7個I2C divices。
NT$124NT$100 未稅加入購物車Quick View -
Grove Shield for micro:bit V2.0 擴展板 連接Grove系列感測器 seeed原廠
0 滿分 5 分此是一個用於Micro:bit V2即插即用Grove擴展板,其提供了數百種不同的Grove模塊,包括傳感器,執行器,通信,顯示等,這將輕鬆快捷地創造更多項目。
NT$314NT$280 未稅加入購物車Quick View -
Grove Breakout for LinkIt Smart 7688 Duo Grove介面 感測器 擴充板 seeed原廠
0 滿分 5 分專門為 Smart 7688 Duo 所設計的 Grove介面感測器擴充板
NT$267NT$180 未稅加入購物車Quick View -
Qwiic pHAT for Raspberry Pi SparkFun原廠
0 滿分 5 分NT$476NT$340 未稅加入購物車Quick View -
4G LTE 7S4 擴展板 RS232轉GPRS 開發擴展板 附贈電源供應器
0 滿分 5 分NT$933NT$838 未稅加入購物車Quick View -
UNO Proto Shield ProtoShield 原型擴展板 含麵包板
0 滿分 5 分ProtoShield原型擴展板上帶兩個LED和兩個按鈕電路,可以直接使用,全部引腳和電源均已引出,非常適合和Arduino配合構建電路原型。
NT$114NT$80 未稅加入購物車Quick View -
MEGA 感測器擴展板 V2.4 Arduino通用 Xbee 藍芽串口 SD卡座 DFRobot原廠
0 滿分 5 分NT$743NT$560 未稅加入購物車Quick View -
micro:bit IO 擴展板 IO Extender for micro:bit V2.0 DFRobot原廠
0 滿分 5 分NT$286NT$240 未稅加入購物車Quick View -
Grove Base Hat for Raspberry Pi 擴展板 支援Pi-4B seeed原廠
0 滿分 5 分用於Raspberry Pi的Grove Base Hat提供數字/模擬/ I2C / PWM / UART端口,以滿足您的所有需求。在內置MCU的幫助下,Raspberry Pi還提供12位8通道ADC。
NT$476NT$420 未稅加入購物車Quick View