Adafruit HUZZAH ESP8266 Breakout
NT$457 NT$440 未稅
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
尚有庫存
- 商品說明
商品說明
Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
The Adafruit HUZZAH ESP8266 breakout is what we designed to make working with this chip super easy and a lot of fun. We took a certified module with an onboard antenna, and plenty of pins, and soldered it onto our designed breakout PCBs. We added in:
- Reset button,
- User button that can also put the chip into bootloading mode,
- Red LED you can blink,
- Level shifting on the UART and reset pin,
- 3.3V out, 500mA regulator (you’ll want to assume the ESP8266 can draw up to 250mA so budget accordingly)
- Two diode-protected power inputs (one for a USB cable, another for a battery)
Two parallel, breadboard-friendly breakouts on either side give you access to:
- 1 x Analog input (1.8V max)
- 9 x GPIO (3.3V logic), which can also be used for I2C or SPI
- 2 x UART pins
- 2 x 3-6V power inputs, reset, enable, LDO-disable, 3.3V output
One breakout at the end has an “FTDI” pinout so you can plug in an FTDI or console cable to upload software and read/write debugging information via the UART. When you’re done with your coding, remove the cable, and this little module can be embeded into your project box.
相關商品
-
ESP8266 串口 WIFI模組 遠距離 無線模組 ESP-07
0 滿分 5 分半孔貼片工藝,所有IO引出,帶金屬屏蔽殼,可過FCC CE認證,可外接IPX天線,也可用內置陶瓷天線
NT$143NT$100 未稅加入購物車Quick View -
WeMos D1 Mini Pro wifi 開發板15件學習套件 基於 ESP8266 NodeMcu Lua
0 滿分 5 分NT$1,190NT$940 未稅加入購物車Quick View -
ESP8266 ESP-01S Relay 繼電器 插座模組 WIFI 智慧插座
0 滿分 5 分本智慧繼電器模組插座基於ESP-01S WIFI 模組設計,可用於DIY 自己的智慧開關,
可以通過手機APP遠端 控制,提供APP和LUA 根源程式。即拿即用,簡單方便。
本商品不包含 ESP-01S模組,若有需要請額外購買。
NT$238NT$171 未稅加入購物車Quick View -
ESP8266 ESP-12F WiFi 模組 ESP8266串口 轉 WiFi 無線透傳 工業級 安信可原廠公司貨
0 滿分 5 分ESP8266-12F wifi 模組 是ESP8266-12的增強版,突破性的設計改版!完善外圍電路,四層板板工藝,增強阻抗匹配,信號輸出更佳,無論是穩定性還是抗干擾能力,PCB天線經過專業實驗室測試,完美匹配,經過FCC認證,都得到了大幅度的提升!
NT$143NT$100 未稅加入購物車Quick View -
Grove – UART WiFi V2 無線網路模組 / 串口通訊模組 ESP8285 晶片
0 滿分 5 分Grove UART WiFi ESP8285 是一個串行無線網路收發器模組,具有無所不在的物聯網 ESP8285的SoC。
NT$524NT$420 未稅加入購物車Quick View -
Wio Link 物聯網開發模組 輕鬆打造智能居家環境 seeed原廠
0 滿分 5 分Wio Link 物聯網開發模組
Wio Link 是簡化你的物聯網專案開發的最佳利器。這是一個基於開源ESP8266 Wi-Fi的開發板,通過虛擬化隨插即用模塊的RESTful API與移動應用程序創建的物聯網應用。建設物聯網應用的傳統方法包括電子工程、微控制器程式設計、網路程式設計、物聯網協定處理和應用開發。每一步都涉及到各種硬體和軟件知識和挑戰。這一次,我們定義的創造物聯網應用的一種新方法。沒有硬體程式設計。沒有麵包板。無跳線。沒有焊接。3個步驟。五分鐘建立自己的物聯網應用!
- 開源Wi-Fi開發板
- 基於 ESP8266 基礎
- 模組化隨插即用
- REST風格的API和移動應用程序
- 5分鐘建立物聯網應用
NT$457NT$400 未稅加入購物車Quick View -
NodeMcu 底座擴展板 NodeMcu Lua WIFI 開發板 ESP8266 串口擴展板 For V3 CH340版本
0 滿分 5 分NT$143NT$100 未稅加入購物車Quick View -
WEMOS D1 R2 V2.1 開發板 基於ESP8266 WEMOS Electronics 原廠出貨
0 滿分 5 分WEMOS原廠2021年後生產的機板上不再有印刷WEMOS字樣,僅晶片鐵殼保留WeMos印刷字樣。
- 1 piece – Wemos D1 R2 Version 2.1 ESP8266 Development Board
- More than enough straight male header pins to solder into all of the open through-holes on the board
NT$352NT$300 未稅加入購物車Quick View -
NodeMCU Lua V2 – Lua based ESP8266 development kit 基於 ESP8266 ESP-12E wifi 開發板 CP2102
0 滿分 5 分NodeMcu 開源快速硬體原型平臺,包括固件和開發板,用幾行簡單的Lua腳本就能開發物聯網應用
- ESP8266 NodeMCU Lua v2 開發平台具有GPIO、PWM、I2C、1-Wire、ADC等功能,可為您的原型開發提供最快速的途徑
- 採用 32 位元物聯網專用 SOC 微控制器,可快速整合電腦、手機或其他 WiFi 相關裝置,讓您的設備輕鬆連接到物聯網
- 支援 802.11 b/g/n Protocol
- 支援 STA/AP/STA+AP 三種工作模式
- NodeMCU Lua v2 之 USB to TTL 晶片,已改用功能更完整、穩定的 SiLab CP2102,可隨插即用
NT$286NT$190 未稅加入購物車Quick View -
Esp8266 ESP01/01S 無線模組轉接板 方便開發 WIFI 設備設備站點
0 滿分 5 分這是 ESP8266 ESP-01S 串行至WiFi收發器模組的常用 ESP-01 型號的麵包板轉接版。由於 ESP-01引腳排列不是麵包板友好和沒有標籤,這使它不便於快速原型。此麵包板適配器將幫助你使用 esp-01模塊原型更容易。這個突破方便地在頂部提供清晰的引出線絲印,並將很好地適合你喜歡的麵包板。最後但並非最不重要的是,我們添加了一個 0.1μF去耦電容,因此ESP-01將始終平穩運行,無阻礙。
NT$67NT$60 未稅加入購物車Quick View