Weather Shield 天氣感測擴展板 SparkFun原廠
NT$1,714 NT$1,380 未稅
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。
尚有庫存
- 商品說明
商品說明
SparkFun Weather Shield 天氣感測擴展板
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。該擴展板上還有可外加選購的感測器擴展端口,如風速,方向,雨量計和GPS,用於定位和超精准定時。Weather Shield 採用Si7021 濕度/溫度感測器,MPL3115A2氣壓感測器和ALS-PT19光感測器。
特徵
- 濕度/溫度傳感器— Si7021
- 氣壓— MPL3115A2
- 光傳感器— ALS-PT19
Documents
=========================================================
SparkFun Weather Shield
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.
The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 Arduino libraries.
Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.
Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately; check the Wish List below or the Recommended Products on this page.
Note: This shield was designed for the SparkFun RedBoard and Arduino Uno and will not work with other boards (like the Arduino Yun, for example) without modification.
Features
- Humidity/Temperature Sensor — Si7021
- Barometric Pressure — MPL3115A2
Light Sensor — ALS-PT19
Documents
相關商品
-
SD Card Shield V4 擴展板 seeed原廠
0 滿分 5 分它提供了您的Arduino一個存儲空間。用戶可以讀/通過的Arduino內置的SD庫寫入SD卡。它支持SD,SDHC和Micro SD卡。它只會佔用你的Arduino的SPI端口。
加入購物車Quick View -
Grove W5500 Ethernet Shield W5500 乙太網路擴充板 for Arduino seeed原廠
0 滿分 5 分W5500乙太網屏蔽v1.0可以為您的項目提供互聯網連接.W5500使用戶能夠通過使用單芯片(其中有TCP / IP堆棧,10/100以太網MAC和PHY嵌入式)來實現應用中的互聯網連接。
NT$1,095NT$900 未稅加入購物車Quick View -
XBee Sensor Shield 感測器擴展板 帶 XBee/ RS485 接口
0 滿分 5 分NT$305NT$280 未稅加入購物車Quick View -
NANO UNO 多用途擴展板 相容Arduino
0 滿分 5 分UNO Nano Prototype Shield I/O Extension Board Module for Arduino
專門為Arduino NANO量身打造,焊上的兩排針腳,即可使用在Arduino duemilanove 2009 、UNO R3。該擴展板,解決了NANO在連接多款傳感器的時候佈線混亂的問題,成為你開發Arduino作品的利器.
NT$143NT$60 未稅加入購物車Quick View -
Arduino GSM Shield 2 義大利製 Arduino 原廠進口 內建集成天線
0 滿分 5 分注意:GSM Shield 僅適用於 2G 網絡。購買前請檢查您所在的國家/地區是否有通行的2G電信網絡可使用,不接受電信網路問題退貨 !
Arduino GSM Shield 2 擴展板可以利用GPRS無線網絡將Arduino連至網際網路。只需將該擴充版插到Arduino板上,插入來自於提供GPRS業務的運營商的SIM卡,按照幾個簡單的步驟即可開始通過網際網路控制您的世界。您還可以撥打/接聽語音電話(您需要1個外部揚聲器和麥克風電路)和發送/接收SMS信息。
NT$3,900NT$3,560 未稅加入購物車Quick View -
Data Logging shield 資料記錄器模組 支援Arduino Uno資料記錄擴展板
0 滿分 5 分注意:RTC電池座不附CR1220 3V鈕釦電池,若有需要請自行購買安裝。
NT$190NT$100 未稅加入購物車Quick View -
Dragino LoRa Shield v95- 868M frequency Arduino Lora 擴展板 seeed原廠
0 滿分 5 分Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$800 未稅加入購物車Quick View -
Wifi Shield V2.0 Arduino/ Seeeduino 無線網路 wifi 擴展板 seeed原廠
0 滿分 5 分NT$1,762NT$1,420 未稅加入購物車Quick View -
LCD Keypad Shield LCD 1602 液晶按鍵擴展板 相容Arduino
0 滿分 5 分NT$238NT$143 未稅加入購物車Quick View -
1Sheeld+ 高階版 Arduino 智慧手機多功能 擴展板 支援 iOS / Android 支援四十餘種功能
0 滿分 5 分高階版 Arduino 智慧手機多功能擴展板 支援 iOS / Android 支援四十餘種功能
1Sheeld +是一個易於配置的 Arduino 擴展板。它具有內置的藍牙模塊,可以讓您的Arduino能夠將自己連接到智慧手機。提供免費的 APP 可供串接應用。 Play Store和Apple Store上提供的1Sheeld +應用程序,您可以輕鬆地將 Android 和 iOS 智慧手機整合到你的專案
NT$2,724NT$2,200 未稅加入購物車Quick View