HTU21D 溫濕度感測器 替代SHT-21
NT$190 NT$140 未稅
溫濕度感測器 HTU21D 感測器模組
基於高性能的濕度感應元件製成,新一代HTU21D溫度和濕度傳感器在尺寸與智能方面建立了新的標準:它嵌入了適於回流焊的雙列扁平無引腳DFN封裝,底面3x3mm,高度1.1 mm。傳感器輸出經過標定的數字信號,標準I2C格式。多樣化的輸出方式,寬的工作電壓範圍,同時具有很高的溫度精度和濕度精度。HTU21系列模塊專為低功耗小體積應用設計,具有良好的品質、快的響應速度、抗干擾能力強、性價比高等優點,微小的體積(3x3mm)、極低的功耗
尚有庫存
- 商品說明
商品說明
HTU21D 溫濕度感測器 HTU21D 感測器模組 提供 Arduino 範例與函數庫下載
基於法國Humirel 公司高性能的濕度感應元件製成,新一代HTU21D 溫度和濕度傳感器在尺寸與智能方面建立了新的標準:它嵌入了適於回流焊的雙列扁平無引腳DFN 封裝,底面3x3mm ,高度1.1mm 。傳感器輸出經過標定的數字信號,標準I2C 格式。多樣化的輸出方式,寬的工作電壓範圍,同時具有很高的溫度精度和濕度精度。HTU21 系列模塊專為低功耗小體積應用設計,具有良好的品質、快的響應速度、抗干擾能力強、性價比高等優點,微小的體積(3x3mm )、極低的功耗
傳感器重要參數:
供電電壓:1.5V—3.6
濕度測量範圍:0—100%RH
溫度測量範圍:-40℃—105℃
最大消耗功率:2.7uW
通信方式:I2C
濕度精度範圍(10%RH to 95%RH):HTU21D±2%RH
濕度遲滯:±1%RH
測量時間:50ms
年漂移量:-0.5%RH/year
響應時間:5 s
同時HTU21D 可以和瑞士的SHT20 、SHT21 實現完全兼容,硬件管腳上可以實現Pin to Pin ,無需修改電路板。軟件程序方面也和瑞士的SHT20 、SHT21 相同,可以實現兼容替換,無需做出任何修改。有著很好的價格優勢,極具性價比. HTU21D超小體積的溫濕度一體數字輸出模塊是一款性能優良的產品。同時,HTU21D在價格、性能、功耗等方面都有很大優勢。
The HTU21D(F) is a new digital humidity sensor with temperature output by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 x 0.9 mm footprint. This sensor provides calibrated, linearized signals in digital, I²C format.
HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Low battery can be detected and a checksum improves communication reliability. The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T).
With MEAS’ improvements and miniaturization of this sensor, the performance-to-price ratio has been improved – and eventually, any device should benefit from its cutting edge energy saving operation mode.
Optional PTFE filter/membrane (F) protects HTU21D digital humidity sensors against dust and water immersion, as well as against contamination by particles. PTFE filter/membranes preserve a high response time. The white PTFE filter/membrane is directly stuck on the sensor housing.
Product Features
- HTU21D humidity and temperature development board
- High accuracy, low power consumption only 2.7uW, fast measuring and response time
- I2C pinout communication easy to connect with the MCU and transmit the data
- Temperature Measuring Range: -40 – 105 ¡æ, Humidity range: 0-100% RH, Humidity Accuracy: ¡À2% RH (10-95% RH)
- Working Voltage: 1.5-3.6V, Module size: 3X3mm
Product Description
The HTU21D is a low-cost, easy to use, highly accurate, digital humidity and temperature sensor can be used in weather stations or humidor control systems for environmental sensing and data logging. It is equipped with I2C communicatiion interface enable you obtaining the relative humidity readings and accurate temperature readings in a easy way.
Specifications:
-Operating voltage: 1.5-3.6V
-Temperature Measuring Range: -40 – 105 ¡æ
-Humidity range: 0-100% RH
-Humidity Accuracy: ¡À2% RH (10-95% RH)
-Humidity conversion time: 50ms
-Interface Type: I2C
Maximum Power Consumption:2.7uW
-Module size: 3X3mm
Package included:1X HTU21D Humidity Temperature Sensor Breakout Board
相關商品
-
加入購物車Quick View
CJMCU-280E BME280-3.3 BOSCH 高精度 氣壓+溫濕度感測器模組 3.3V
0 滿分 5 分CJMCU-280E BME280 BOSCH 氣壓感測器
BME280提供出色的整體精度。壓力讀數的相對精度為±12hPa,相當於高度差為±1m處分辨率為1.5cm。BME280是增強高性能GPS應用的理想選擇,它可以實現更精確和更快的位置測定。ME280是一款基於博世APSM工藝和創新的電阻式測量技術的小尺寸、高性能壓力和溫濕度傳感器,非常適合空間有限的移動設備,如智能手機,平板電腦、智能手錶和可穿戴設備,BME280特別適合電池驅動的應用場合。
加入購物車Quick View -
200cm長度 / 2米防水探針型熱電偶溫度感測器 不銹鋼封裝 防水型 DS18b20溫度感測
0 滿分 5 分本溫度感測器包括一個金屬探測器和 200 公分的電纜,具有較寬的溫度測量範圍 (-55 ° C 到 125 ° C ),適合沉浸式溫度檢測。注意事項: 電纜線部分不能承受溫度高於 105 ° c
優質不銹鋼管封裝 防水防潮防生鏽,探頭採用原装DS18B20溫度傳感器晶片,每個引腳均用熱縮管隔開,防止短路,內部封膠,防水防潮,優質不銹鋼管封裝防生鏽
不銹鋼外殼(6*50mm),引線長度200cm
3.0V~5.5V供電
9~12位可調分辨率
感溫範圍寬-55℃ ~ +125℃
輸出引線:紅色(VCC),藍(黃)色(DATA),黑色(GND)
NT$143NT$100 未稅加入購物車Quick View -
GY-68 BMP180 數位氣壓溫度感測器模組 BOSCH 代替BMP085
0 滿分 5 分BMP180是一款高精度、小體積、超低能耗的壓力傳感器,可以應用在行動裝置中,性能卓越,精度最低可以達到0.03hPa,並且耗電低,只有3μA。BMP180採用強大的8-pin陶瓷無引線芯片承載(LCC)超薄封裝,可以通過I2C總線直接與各種微處理器相連
NT$114NT$95 未稅加入購物車Quick View -
CJMCU75 LM75 溫度感測器 高速I2C介面 高精度 開發板模組
0 滿分 5 分CJMCU75 LM75 是一個高速I2C介面的 溫度感測器,可以在-55℃~+125℃的溫度範圍內將溫度直接轉換為數位信號,並可實現0.125℃的精度。
NT$190NT$100 未稅加入購物車Quick View -
AM2320 奧松 數字型溫濕度感測器探頭
0 滿分 5 分AM2320 奧松 數字型溫濕度感測器探頭
附原廠技術文件與 Arduino 範例導覽
AM2320 數字溫濕度感測器是一款含有己校準數字信號輸出的溫濕度複合型感測器。採用專用的溫濕度採集技術,確保產品具有極高的可靠性與卓越的長期穩定性。傳感器包括一個電容式感濕元件和一個高精度集成測溫元件,並與一個高性能微處理器相連接。該產品具有品質卓越、超快響應、抗干擾能力強、性價比極高等優點。
NT$114NT$100 未稅加入購物車Quick View -
1000cm長度 10米 防水探針型熱電偶溫度感測器 不銹鋼封裝 防水型 DS18b20 溫度感測器
0 滿分 5 分本溫度感測器包括一個金屬探測器和 1000cm(10米) 的電纜,具有較寬的溫度測量範圍 (-55 ° C 到 125 ° C ),適合沉浸式溫度檢測。注意事項: 電纜線部分不能承受溫度高於 105 ° c
優質不銹鋼管封裝 防水防潮防生鏽,探頭採用原装DS18B20溫度傳感器晶片,每個引腳均用熱縮管隔開,防止短路,內部封膠,防水防潮,優質不銹鋼管封裝防生鏽
不銹鋼外殼(6*50mm),引線長度 1000cm
3.0V~5.5V供電
9~12位可調分辨率
感溫範圍寬-55℃ ~ +125℃
輸出引線:紅色(VCC),藍(黃)色(DATA),黑色(GND)
NT$524NT$280 未稅加入購物車Quick View -
GY-SHT31-D 數位型 i2c 通訊 , 溫濕度感測器模組
0 滿分 5 分GY-SHT31-D 數位型 i2c 通訊 , 溫濕度感測器模組
Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we have some that have a true I2C interface for easy reading. The SHT31-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses.
NT$410NT$305 未稅加入購物車Quick View -
MAX6675 溫度感測器模組含K型熱電偶 高溫感測器模組
0 滿分 5 分MAX6675 K型熱電偶模塊熱電偶溫度傳感器最高溫度可測600度 附 Arduino 範例與函數庫
MAX6675 是美國 MAXIM 公司生產的帶有冷端補償、線性校正、熱電偶斷線檢測的 12位元 分辨率 K型熱電偶轉換器, 只要用五條杜邦線將本模組和 MCU 的 IO 埠連接在一起,就可以使用 SPI協定直接讀取熱電偶的溫度數值。適用範圍:單晶片愛好者、學生、科研單位實驗、樣機開髮用;室溫測量、汽車改裝、汽車空調、冰箱、冷櫃、中低溫乾燥箱;冷凍庫、糧倉、儲罐、電訊機房、電力機房、電纜線槽等測溫;軸瓦、缸體、紡機、空調、狹小空間工業設備測溫
NT$333NT$190 未稅加入購物車Quick View -
Grove – 1-Wire Thermocouple Amplifier (MAX31850K) 1線熱電偶放大器 seeed原廠
0 滿分 5 分
Grove – 1-Wire熱電偶放大器(MAX31850K)是一款熱電偶至數字轉換器,具有14位分辨率和冷端補償。該模塊設計用於與k型熱電偶配合使用。熱電偶的測量範圍比熱敏電阻大得多。例如,我們網站上的這款k型熱電偶的測量範圍為-50℃至+ 600℃。NT$495NT$460 未稅加入購物車Quick View -
K型M6螺釘式熱電偶 溫度感測器測溫線 MAX6675探頭感溫線(不含溫度感測器)
0 滿分 5 分NT$95NT$80 未稅加入購物車Quick View