ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
NT$619 NT$560 未稅
ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使
尚有庫存
- 商品說明
商品說明
SparkFun ESP8266 Thing Dev Board 物聯網開發板 SparkFun 原裝進口
SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。該Thing是低成本和易於使用,和Arduino IDE集成可以在短短幾個步驟實現。我們通過打開所有模塊的引腳,添加了LiPo充電器,電源和所需的其他所有支持電路,使ESP8266易於使用。
SparkFun ESP8266 Thing是一個相對簡單的板。引腳分為兩個平行的麵包板兼容行。板頂部的USB和LiPo連接器通過附近的ON / OFF開關控制提供電源。朝向板內部的LED指示IC的功率,電荷和狀態。ESP8266的最大電壓為3.6V,因此Thing具有板載3.3V穩壓器,可為IC提供安全,一致的電壓。這意味著ESP8266的I / O引腳也運行在3.3V,你需要電平轉換任何5V信號運行到IC。需要3.3V FTDI Basic來編程SparkFun ESP8266 Thing,但是具有3.3VI / O電平的其他串行轉換器也應該工作得很好。
Features:
- All module pins broken out
- On-board LiPo charger/power supply
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLLs, regulators, DCXO and power management units
- Integrated low power 32-bit CPU could be used as application processor
- +19.5dBm output power in 802.11b mode
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- ESP8266 Powered Propane Poofer
- Graphical Datasheet
- Cloud Clouds IoT Demo
- GitHub (Design Files)
SparkFun ESP8266 Thing
The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. The Thing is low-cost and easy to use, and Arduino IDE integration can be achieved in just a few steps. We’ve made the ESP8266 easy to use by breaking out all of the module’s pins, adding a LiPo charger, power supply, and all of the other supporting circuitry it requires.
Why the name? We lovingly call it the “Thing” due to it being the perfect foundation for your Internet of Things project. The Thing does everything from turning on an LED to posting data with phant.io, and can be programmed just like any microcontroller. You can even program the Thing through the Arduino IDE by installing the ESP8266 Arduino addon.
The SparkFun ESP8266 Thing is a relatively simple board. The pins are broken out to two parallel, breadboard-compatible rows. USB and LiPo connectors at the top of the board provide power – controlled by the nearby ON/OFF switch. LEDs towards the inside of the board indicate power, charge, and status of the IC. The ESP8266’s maximum voltage is 3.6V, so the Thing has an onboard 3.3V regulator to deliver a safe, consistent voltage to the IC. That means the ESP8266’s I/O pins also run at 3.3V, you’ll need to level shift any 5V signals running into the IC. A 3.3V FTDI Basic is required to program the SparkFun ESP8266 Thing, but other serial converters with 3.3V I/O levels should work just fine as well. The converter does need a DTR line in addition to the RX and TX pins.
相關商品
-
Blynk Board – ESP8266 Blynk 開發板 SparkFun原廠
0 滿分 5 分Blynk是一款易於使用的應用程序生成器,它允許用戶將各種按鈕,滑塊,圖形顯示甚至RGB控制器添加到手機中。
NT$1,429NT$1,100 未稅加入購物車Quick View -
WIFI ESP8266 模組轉接板 ESP-07 ESP-08 ESP-12 (不含模組)
0 滿分 5 分NT$48NT$29 未稅加入購物車Quick View -
Adafruit HUZZAH ESP8266 Breakout
0 滿分 5 分Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
NT$457NT$440 未稅加入購物車Quick View -
Wio Node 迷你 ESP8266 開發版 seeed原廠
0 滿分 5 分Wio Node 迷你 ESP8266 開發版
您可以更容易的開發各種物聯網專案,透過簡單 APP 操作即可連線,配置您的專案。建設物聯網項目是令人興奮的,你可以連接幾乎你周圍的一切和控制。然而有時不容易建立物聯網應用因為它需要大量艱苦的工作,如硬體、程式設計、跳絲和焊接等甚至一個訓練有素的用戶會處理所有的工作,花上幾個小時,更別說初學者。為了簡化物聯網項目的發展,Seeed 推出 WIO Node 方便讓開發者可以輕易透過簡單易用的UI開發自己的物聯網專案。
NT$352NT$320 未稅加入購物車Quick View -
ESP8266 串口 WIFI模組 遠距離 無線模組 ESP-07
0 滿分 5 分半孔貼片工藝,所有IO引出,帶金屬屏蔽殼,可過FCC CE認證,可外接IPX天線,也可用內置陶瓷天線
NT$143NT$100 未稅加入購物車Quick View -
加入購物車Quick View
FireBeetle Board-ESP8266 WiFi 物聯網開發板 DFRobot原廠
0 滿分 5 分加入購物車Quick View -
NodeMCU-32S WiFi 物聯網開發板 相容ESP-32S 提供WiFi+藍牙 CH340版本
0 滿分 5 分WiFi+藍牙4.2+BLE/雙核CPU/Lua語言/像Arduino一樣操作硬件IO/用 Nodejs 類似語法寫網絡應用/超高性能、低成本的WiFi+藍牙模組「ESP-32S」NodeMCU 是一個開源的物聯網平台。它使用Lua腳本語言編程。該平台基於eLua開源項目。「NodeMCU-32S」基於ESP-32S模組。該平台使用了很多開源項目,例如lua-cjson, spiffs. 「NodeMCU-32S」包含了可以運行在ESP32 Wi-Fi SoC芯片之上的固件,以及基於ESP-32S模組的硬件。ESP32是上海Espressif研發的WiFi+藍牙芯片,旨在為嵌入式類產品提供接入網絡的功能。
NT$286NT$180 未稅加入購物車Quick View -
加入購物車Quick View
mini D1 wifi NodeMcu Lua WIFI 基於ESP8266 開發板 D1 Mini ESP-12F
0 滿分 5 分加入購物車Quick View -
Wio Link 物聯網開發模組 輕鬆打造智能居家環境 seeed原廠
0 滿分 5 分Wio Link 物聯網開發模組
Wio Link 是簡化你的物聯網專案開發的最佳利器。這是一個基於開源ESP8266 Wi-Fi的開發板,通過虛擬化隨插即用模塊的RESTful API與移動應用程序創建的物聯網應用。建設物聯網應用的傳統方法包括電子工程、微控制器程式設計、網路程式設計、物聯網協定處理和應用開發。每一步都涉及到各種硬體和軟件知識和挑戰。這一次,我們定義的創造物聯網應用的一種新方法。沒有硬體程式設計。沒有麵包板。無跳線。沒有焊接。3個步驟。五分鐘建立自己的物聯網應用!
- 開源Wi-Fi開發板
- 基於 ESP8266 基礎
- 模組化隨插即用
- REST風格的API和移動應用程序
- 5分鐘建立物聯網應用
NT$457NT$400 未稅加入購物車Quick View -
ESP8266 Thing 物聯網開發板 SparkFun原廠
0 滿分 5 分SparkFun ESP8266 Thing是 ESP8266 WiFi SoC的突破和開發板,是物聯網(IoT)或WiFi相關項目的領先平台。
NT$905NT$720 未稅加入購物車Quick View