樹莓派 7吋觸控顯示器 Raspberry Pi 樹莓派官方原廠公司貨
NT$2,900 未稅
本產品非人為因素故障保固3個月
尚有庫存
- 商品說明
商品說明
-
觸控螢幕 市場上唯一支持10點觸控螢幕
Raspberry Pi LCD Touch Screen — 7 inch
The Raspberry Pi has it’s very own official LCD Touch Screen. A few years in the making, the Raspberry Pi Foundation wanted you to have the perfect display screen for your Pi without compromise.
Features & Benefits of the Pi LCD Touch Screen
• Multi-touch capacitive touch screen — supports up to 10 finger touches
• 7 inch display
• 800 x 480 pixel resolution at 60 frames per second (fps)
• 24-bit RGB colour
• 70° viewing angle
• Only two connections required
• Flexible power supply
• No electronic interference
• Full Raspbian OS functionality without a keyboard and mouse
• Kivy touch screen development software available —http://kivy.org/docs/installation/installation-rpi.html
LCD Touch Screen Contents
• LCD touch screen
• Adapter board
• DSI ribbon cable
• 4 jumper wires
• Mounting hardware
Setting up your LCD Touch Screen
Set up is quick and easy. The adapter board and your Pi are mounted to the rear of the LCD using the basic fixings supplied. The DSI ribbon cable provides the display interface between the Pi and the LCD assembly.
Power Supply Options for your LCD Touch Screen
• Separate supply — Power the display board separately to the Pi using a uUSB power supply of least 500 mA
• Raspberry Pi 2A power supply — Connect a Pi power supply (8226373) to the display board. The board can then power the Pi via USB connection
• GPIO jumpers — Power the display board from the Pi using the supplied jumper wires
https://www.raspberrypi.org/blog/the-eagerly-awaited-raspberry-pi-display/
相關商品
-
8路 電平轉換模組 3.3V和5V IO雙向互轉 支援樹莓派與 Arduino
0 滿分 5 分8路 電平轉換模組 3.3V和5V IO雙向互轉 (適合樹莓派或串口類型模組接5V傳感器)
因莓派 GPIO是3.3V的,所以接常規的5V 感測器很不方便。因此本產品實現8通道的高電壓邏輯與低電壓邏輯雙向轉換,實現Ax與Bx雙向互轉。轉換電平範圍:1.8V-6V
8 Channel 3.3V To 5V Voltage Convert Module For Raspberry Pi
NT$129NT$95 未稅加入購物車Quick View -
SanDisk Ultra micro SDXC UHS-I 64GB 記憶卡 100MB/s
0 滿分 5 分新規每秒100MB!
SanDisk Ultra microSDXC UHS-I 64GB 記憶卡 100MB/s- 傳輸速度最高100MB/秒、速度更快!
- 支援樹莓派、手機、平板、行車紀錄器
- Class 10 的視訊錄製功能
- 錄製更多 Full HD 檔案
NT$476NT$333 未稅加入購物車Quick View -
樹莓派 LoRa/GPS HAT擴展板 868M frequency 樹莓派專用 seeed原廠
0 滿分 5 分樹莓派 LoRa/GPS HAT 擴展版 – 868M frequency 樹莓派專用 Lora / GPS 擴展版
- Raspberry pi Lora和GPS的擴展版
- 頻率:868兆赫
- Raspberry Pi 的2 model B / Raspberry Pi 3 完全相容
- FSK, GFSK, MSK, GMSK, LoRa™and OOK modulation
- EASY™, advanced AGPS technology 無需外部記憶體
加入購物車Quick View -
樹莓派雙通道RS485擴展板 for Pi 3B/4B DFRobot原廠
0 滿分 5 分NT$1,143NT$1,000 未稅加入購物車Quick View -
樹莓派 3代 B+ 專用 GPIO Shield 擴展板 V3 可堆疊
0 滿分 5 分樹莓派3 代B+ 專用 GPIO擴展板 V3 可堆疊
絕對的調試神器,把GPIO分別複製三次,GPIO分開使用,不會打架
樹莓派3代B+專用GPIO擴展板,採用堆疊式的積木設計,將樹莓派的IO口一組擴展出三組,每個IO口我們都有清晰的標記,方便使用。我們還附送帶螺絲和銅柱,讓擴展板更加牢固的固定在主板上,讓大家在做實驗和DIY的時候更方便。
NT$400NT$333 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派散熱片 Raspberry Pi Model B+ / Pi3 / Pi4 工控箱上機專用 , 三件式鋁鰭散熱片附帶散熱貼
0 滿分 5 分三件式套件包含: 晶片散熱片14*14mm (1片) + 9*9mm (1片) + 14*9mm(1片)
散熱片已經貼上專用散熱貼,只需撕下紙片,就可以放心使用
加入購物車Quick View -
加入購物車Quick View
樹莓派攝影鏡頭專用 CSI 排線 100CM 加長版特製 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 100CM 版本, 另有50CM 版
加入購物車Quick View -
DS3231 RTC 高精度時鐘模組 適用 Raspberry Pi 樹莓派 全系列開發板
0 滿分 5 分最高精度 時鐘模組 DS3231, Raspberry Pi B 和 Raspberry Pi B+ 都可用 , 模組自身能適應3.3V和5V的系統,無需電位轉換。樹莓派主板本身沒有硬件時鐘電路,本模組就是用於樹莓派的硬件時鐘電路。在沒有網絡授時服務的情況下,樹莓派還是會精確走時,解決重啟變1970年和重啟不走時的困擾。
NT$143NT$90 未稅加入購物車Quick View -
樹莓派原廠 7吋觸控螢幕機殼 一體成形 白色外殼 Pi3B/B+版本 英國製
0 滿分 5 分外殼顏色僅剩白色款。
NT$857NT$560 未稅加入購物車Quick View -
RELAYplate 樹莓派專用 7 路繼電器擴展板 可堆疊到最高 56 路繼電器 UL 60950 安規 SparkFun原廠
0 滿分 5 分RELAYplate 是 Raspberry Pi 樹莓派的第一個專用繼電器擴展板,符合滿足 UL 60950 的安全規範要求,同時能夠切換 120v交流電。
加入購物車Quick View