樹莓派 7吋觸控顯示器 Raspberry Pi 樹莓派官方原廠公司貨
NT$2,900 未稅
本產品非人為因素故障保固3個月
尚有庫存
- 商品說明
商品說明
-
觸控螢幕 市場上唯一支持10點觸控螢幕
Raspberry Pi LCD Touch Screen — 7 inch
The Raspberry Pi has it’s very own official LCD Touch Screen. A few years in the making, the Raspberry Pi Foundation wanted you to have the perfect display screen for your Pi without compromise.
Features & Benefits of the Pi LCD Touch Screen
• Multi-touch capacitive touch screen — supports up to 10 finger touches
• 7 inch display
• 800 x 480 pixel resolution at 60 frames per second (fps)
• 24-bit RGB colour
• 70° viewing angle
• Only two connections required
• Flexible power supply
• No electronic interference
• Full Raspbian OS functionality without a keyboard and mouse
• Kivy touch screen development software available —http://kivy.org/docs/installation/installation-rpi.html
LCD Touch Screen Contents
• LCD touch screen
• Adapter board
• DSI ribbon cable
• 4 jumper wires
• Mounting hardware
Setting up your LCD Touch Screen
Set up is quick and easy. The adapter board and your Pi are mounted to the rear of the LCD using the basic fixings supplied. The DSI ribbon cable provides the display interface between the Pi and the LCD assembly.
Power Supply Options for your LCD Touch Screen
• Separate supply — Power the display board separately to the Pi using a uUSB power supply of least 500 mA
• Raspberry Pi 2A power supply — Connect a Pi power supply (8226373) to the display board. The board can then power the Pi via USB connection
• GPIO jumpers — Power the display board from the Pi using the supplied jumper wires
https://www.raspberrypi.org/blog/the-eagerly-awaited-raspberry-pi-display/
相關商品
-
樹莓派 專用配件 T型 GPIO 擴展板 T-Cobbler Plus + 40P 彩虹排線 + 400孔麵包板
0 滿分 5 分樹莓派Raspberry Pi 2,3 代專用配件T型GPIO擴展板T-Cobbler Plus 樹莓派2代專用配件【同時兼容1代B+型樹莓派】,適用於麵包板實驗。本產品採用台灣正凌40P純金插座進行生產(白色塑料件上帶正凌品牌LOGO)Raspberry Pi的GPIO每一個針腳都提供不同的用途,Model B+與Pi 2 Model B有40個針腳,有提供電源和其它的應用。
出貨清單:
- T型GPIO擴展板 T-Cobbler Plus 一塊
- 40P 高品質彩虹排線 一條
- 400孔麵包板
NT$381NT$238 未稅加入購物車Quick View -
樹莓派 攝影鏡頭 CSI 排線 50CM 加長版特製 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 50CM 版本, 另有30CM 版
NT$124NT$90 未稅加入購物車Quick View -
加入購物車Quick View
樹莓派攝影鏡頭專用 CSI 排線 100CM 加長版特製 特別訂製排線
0 滿分 5 分英國原廠默認贈送的是15cm,比較短,只適合把攝像頭放在樹莓派旁邊,不適合工業用機台安裝或者自動車的配置,台灣物聯科技特別請廠商開模訂製兩種尺寸, 本商品為 100CM 版本, 另有50CM 版
加入購物車Quick View -
加入購物車Quick View
樹莓派 外殼 Raspberry Pi 2,3 代 工控專用 ABS 透明機殼 GPIO 保護盒子 (可壁掛)
0 滿分 5 分出貨產品不含圖片裡的樹梅派開發板 !
此產品為專為樹莓派 3B與 3B+ 量身打造的一款極度實用的保護外殼,物超所值,操作簡單。產品為透明ABS塑料材質,完善的安裝孔和接口使該外殼即能保護裡面的板子,又能夠充分開發所有端 口。使用時請參看我們的說明,來固定樹莓派,並且安裝矽膠墊。
加入購物車Quick View -
8路 電平轉換模組 3.3V和5V IO雙向互轉 支援樹莓派與 Arduino
0 滿分 5 分8路 電平轉換模組 3.3V和5V IO雙向互轉 (適合樹莓派或串口類型模組接5V傳感器)
因莓派 GPIO是3.3V的,所以接常規的5V 感測器很不方便。因此本產品實現8通道的高電壓邏輯與低電壓邏輯雙向轉換,實現Ax與Bx雙向互轉。轉換電平範圍:1.8V-6V
8 Channel 3.3V To 5V Voltage Convert Module For Raspberry Pi
NT$129NT$95 未稅加入購物車Quick View -
樹莓派雙通道RS485擴展板 for Pi 3B/4B DFRobot原廠
0 滿分 5 分NT$1,143NT$1,000 未稅加入購物車Quick View -
樹莓派記憶卡 SANDISK 32GB 【100MB/s】microSDHC class 10 microSD TF C10
0 滿分 5 分SANDISK microSDHC/UHS-I Class10 32GB 記憶卡
UHS-I 高速小卡;讀取100MB/秒
■容量:32GB
■樹莓派/相機/手機/平板/行車記錄器;一卡包
■高相容性;高品質
NT$333NT$267 未稅加入購物車Quick View -
DS3231 RTC 高精度時鐘模組 適用 Raspberry Pi 樹莓派 全系列開發板
0 滿分 5 分最高精度 時鐘模組 DS3231, Raspberry Pi B 和 Raspberry Pi B+ 都可用 , 模組自身能適應3.3V和5V的系統,無需電位轉換。樹莓派主板本身沒有硬件時鐘電路,本模組就是用於樹莓派的硬件時鐘電路。在沒有網絡授時服務的情況下,樹莓派還是會精確走時,解決重啟變1970年和重啟不走時的困擾。
NT$143NT$90 未稅加入購物車Quick View -
樹莓派 LoRa/GPS HAT擴展板 868M frequency 樹莓派專用 seeed原廠
0 滿分 5 分樹莓派 LoRa/GPS HAT 擴展版 – 868M frequency 樹莓派專用 Lora / GPS 擴展版
- Raspberry pi Lora和GPS的擴展版
- 頻率:868兆赫
- Raspberry Pi 的2 model B / Raspberry Pi 3 完全相容
- FSK, GFSK, MSK, GMSK, LoRa™and OOK modulation
- EASY™, advanced AGPS technology 無需外部記憶體
加入購物車Quick View -
加入購物車Quick View
GrovePi+ Plus 樹莓派 Grove 插座式 擴充板 擴展板 seeed原廠 支援Pi 4B
0 滿分 5 分GrovePi+自帶15個Grove擴展口,可以完美兼容Raspberry Pi 3 Model B和B+跟最新的Pi 4B。
加入購物車Quick View