MCP4725 模組 I2C DAC Breakout 開發板 附排針
NT$179 NT$100 未稅
MCP4725是具有非易失性存儲器(EEPROM)的單通道12位緩衝電壓輸出DAC。 用戶可將配置寄存器位(2位)和DAC輸入數據(12位)存儲到非易失性EEPROM(14位)存儲器中。通過設置配置寄存器位可以把DAC配置成正常模式或節省功耗的關斷模式。 器件可以使用2線I2C兼容串行接口,且由電壓範圍為2.7V至5.5V的單電源供電。
出貨附排針
尚有庫存
- 商品說明
商品說明
MCP4725 模組 I2C DAC Breakout 開發板 附排針
MCP4725是具有非易失性存儲器(EEPROM)的單通道12位緩衝電壓輸出DAC。 用戶可將配置寄存器位(2位)和DAC輸入數據(12位)存儲到非易失性EEPROM(14位)存儲器中。通過設置配置寄存器位可以把DAC配置成正常模式或節省功耗的關斷模式。 器件可以使用2線I2C兼容串行接口,且由電壓範圍為2.7V至5.5V的單電源供電。
Description:
You’ve always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The CJMCU-MCP4725 is an I 2 C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I 2 C interface on the Arduino microcontroller. Digital to analog converters are great for sound generation, musical instruments, and many other creative projects!
This version of the CJMCU-MCP4725 Breakout fixes a few issues with the board including the IC footprint, the I 2 C pinout, changes the overall board dimensions to better fit your projects, and a few more minor tweaks. This board breaks out each pin you will need to access and use the MCP4725 including GND and Signal OUT pins for connecting to an oscilloscope or any other device you need to hook up to the board. Also on board are SCL, SDA, VCC, and another GND for your basic I 2 C pinout. Additionally, if you are looking to have more than one MCP4725 on a bus, the pull-up resistors on this board can be disabled just check the Hookup Guide in the Documents section below for instructions and tips on doing this.
Features:
- 12-bit resolution
- I 2 C Interface (Standard, Fast, and High-Speed supported)
- Small package
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
相關商品
-
I2C CAN-BUS Module 基於MCP2551 and MCP2515 CAN協議通訊模組 seeed原廠
0 滿分 5 分NT$762NT$680 未稅加入購物車Quick View -
XIAO 多功能擴展板 內建0.96吋OLED顯示、RTC、Grove接頭、 MicroSD 支援Adafruit QT Py seeed原廠
0 滿分 5 分一款功能強大的 Seeeduino XIAO 多功能擴展板,只有 Raspberry Pi 4 的一半大小。 它能夠以簡單快捷的方式構建原型和項目。 OLED、RTC、可擴展內存、無源蜂鳴器、RESET/用戶按鈕、5V伺服連接器、多種數據接口等豐富的外設,讓您探索Seeeduino XIAO的無限可能。 該板也很好地支持電路python。
NT$762NT$600 未稅加入購物車Quick View -
Gravity: Bluno Beetle Shield Beetle BLE 多功能擴展板 DFRobot原廠
0 滿分 5 分只要按照說明,將Bluno Beetle焊接在上面,你就可以直插3pin的傳感器和其他擴展設備。另外,擴展板還具備外接電源接口,可直接外接供電。
NT$333NT$260 未稅加入購物車Quick View -
FTDI Basic Breakout – 5V FT232RL晶片 SparkFun原廠
0 滿分 5 分NT$695NT$500 未稅加入購物車Quick View -
加入購物車Quick View
Analog/Digital MUX Breakout-CD74HC4067 數位/類比轉換板 16通道 Sparkfun原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
IoT Power Relay 功率開關 AC/DC Control Relay 物聯網功率繼電器 Sparkfun原廠
0 滿分 5 分加入購物車Quick View -
IIC / I2C 介面 LCD 1602 2004 轉接板
0 滿分 5 分IIC/I2C LCD 1602,2004 轉接板不含 LCD 螢幕
Arduino控制板IO口只有20個,加些傳感器、SD卡啥的,繼電器等模塊多了,IO口就不夠用了,原來的1602屏需要7個IO口才能驅動起來,我們開發的這個模塊可以幫你省5個IO口
產品參數:
- 尺寸:41.5mm(長)*19mm(寬)*15.3mm(高)
- 重量:5g
- PCB顏色:黑色
- 供電電壓:2.5-6V
- 支持I2C協議
- 帶背光電源控制,可以通過跳線帽設置是否連接背光電源。插上跳線帽為連接背光電源,拔掉跳線帽為斷開背光電源
- 對比度可調節,旋轉藍色電位器,順時針增強,逆時針減弱。電位器設計在正面,方便客戶隨時隨地自由調節
- 模塊可級聯,最多可級聯8個。通過短路A0/A1/A2修改設備地址。默認地址為0x27
NT$62NT$40 未稅加入購物車Quick View -
Piezo Igniter 壓電點火器 點火開關 SparkFun原廠
0 滿分 5 分NT$400NT$380 未稅加入購物車Quick View -
ADS1115 四通道 超小型16位精密模數轉換器(ADC) 開發板模組
0 滿分 5 分NT$295NT$200 未稅加入購物車Quick View -
OpenMV H7 Plus智慧視覺微控制器板 攝影像機開發
0 滿分 5 分OpenMV Cam是一款小型,低功耗的微控制器板,可讓您在現實世界中輕鬆實現使用機器視覺的應用。
NT$3,810NT$3,700 未稅加入購物車Quick View