XBee Explorer Dongle sparkfun 原廠
NT$933 NT$848 未稅
This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
尚有庫存
- 商品說明
商品說明
這是Digi XBee模塊系列的SparkFun XBee Explorer Dongle單元。使用XBee Explorer Dongle,您可以將設備直接插入USB端口,並將其作為計算機和XBee之間的網關。不需要電纜!本機適用於所有XBee模塊,包括1系列和2.5系列,標準版和專業版。板載穩壓器最高可達500mA。
該主板的亮點是FT231X USB轉串口轉換器。這就是在您的計算機和XBee之間轉換數據的原因。還有一個複位按鈕和一個電壓調節器,為XBee提供充足的電力。此外,如果您需要調試XBee,有四個LED可以提供幫助:RX,TX,RSSI(信號強度指示器)和電源指示燈。
該板還將每個XBee的I / O引腳分成一對麵包板兼容的接頭。因此,如果您想要使用XBee的擴展功能,您可以將一些插頭引腳焊接到那些,甚至只需焊接一些電線。
This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
The highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator.
This board also breaks out each of the XBee’s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Documents:
相關商品
-
Grove – UART WiFi V2 無線網路模組 / 串口通訊模組 ESP8285 晶片
0 滿分 5 分Grove UART WiFi ESP8285 是一個串行無線網路收發器模組,具有無所不在的物聯網 ESP8285的SoC。
NT$524NT$420 未稅加入購物車Quick View -
加入購物車Quick View
NRF24L01+工業級遠距離升級版3.3V 2.4G無線收發模組
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
ESP8266 ESP-01S 串口 WIFI 收發無線模組 安信可科技原廠貨
0 滿分 5 分加入購物車Quick View -
HC-06 藍芽轉 UART 從機藍芽模組 具底板,提供Arduino 範例
0 滿分 5 分請勿將電源接到信號腳上,會直接燒壞模組!
兼容版跟原裝版的功能操作方法都相同!
加入購物車Quick View -
PN532 NFC RFID V3 模組 近場通訊 支持 Android 手機通訊
0 滿分 5 分PN532 NFC RFID V3 模組 近場通訊 支持 Android 手機通訊
NFC又稱近距離無線通信,是一種短距離的高頻無線通信技術,允許電子設備之間進行非接觸式點對點數據傳輸交換數據。這個技術由免接觸式射頻識別(RFID)演變而來,並向下兼容RFID,最早由Sony和Philips各自開發成功,主要用於手機等手持設備中提供M2M(Machine to Machine)的通信。由於近場通訊具有天然的安全性,因此,NFC技術被認為在手機支付等領域具有很大的應用前景。
NT$476NT$257 未稅加入購物車Quick View -
HC-12 SI4463 單片機串口模組 433 MHz 遠距離 1000M
0 滿分 5 分HC-12 SI4463 單片機串口模組 433 MHz 遠距離 1000M 替代藍芽更長距離穩定無線傳輸方案
附詳細 Arduino 範例說明與教學, 有完整兩塊 Arduino 透過 HC-12 傳輸資料的範例與說明(英文)與完整技術文件
- 供電電壓3.2V~5.5V。(如果模組要長時間工作在發射狀態,建議當電源電壓超過4.5V時串接一個1N4007二極管,避免模組內置LDO發熱)
- 默認通訊距離(開闊地測試):600m左右(通訊距離最高可調達到1000m,空中波特率5000bps)。
- 默認空閒電流:16MA(模組在不同的工作模式下的工作電流不同)。
- 模組尺寸:27.8mm×14.4mm×4mm。
- 工作頻率範圍(433.4—473.0MHz,多達100個通信頻道)最大100mW 發射功率(可設置)
- 模組支持軟件升級。(我們為客戶提供升級軟件)
- 默認出廠設置:工作模式FU3,波特率9600bps,通訊頻道CH001(433.4M)。
NT$267NT$238 未稅加入購物車Quick View -
Bluetooth 4.0 BLE CC2540 CC2541 藍芽模組 BLE4.0 帶底板
0 滿分 5 分NT$305NT$200 未稅加入購物車Quick View -
HX1838 紅外線接收遙控模組 紅外接收模組
0 滿分 5 分HX1838遙控模組 紅外接收模組
- 感測器採用HX1838,靈敏度高
- 工作電壓5V
- 輸出形式:數位量輸出
- 設有固定螺栓孔,方便安裝
- 小板PCB尺寸:1.9cm * 1.4cm
- 電源指示燈(紅色)
NT$85NT$38 未稅加入購物車Quick View -
433 868 915MHz Ultra low power data radio module 低功耗無線數據傳輸模組 內附天線
0 滿分 5 分低功耗無線數據傳輸模組內附天線
加入購物車Quick View -
Grove-LoRa-E5 (STM32WLE5JC)無線傳輸模組 868/915 MHz,支援LoRaWAN seeed原廠
0 滿分 5 分內置LoRa-E5 STM32WLE5JC的Grove LoRa-E5由ARM Cortex M4超低功耗MCU內核和LoRa SX126x供電,是一種易於使用的無線模塊,支持EU868和US915頻率上的LoRaWAN協議,並且(G )FSK,BPSK,(G)MSK,LoRa調製。
NT$714NT$560 未稅加入購物車Quick View