XBee Explorer Dongle sparkfun 原廠
NT$933 NT$848 未稅
This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
尚有庫存
- 商品說明
商品說明
這是Digi XBee模塊系列的SparkFun XBee Explorer Dongle單元。使用XBee Explorer Dongle,您可以將設備直接插入USB端口,並將其作為計算機和XBee之間的網關。不需要電纜!本機適用於所有XBee模塊,包括1系列和2.5系列,標準版和專業版。板載穩壓器最高可達500mA。
該主板的亮點是FT231X USB轉串口轉換器。這就是在您的計算機和XBee之間轉換數據的原因。還有一個複位按鈕和一個電壓調節器,為XBee提供充足的電力。此外,如果您需要調試XBee,有四個LED可以提供幫助:RX,TX,RSSI(信號強度指示器)和電源指示燈。
該板還將每個XBee的I / O引腳分成一對麵包板兼容的接頭。因此,如果您想要使用XBee的擴展功能,您可以將一些插頭引腳焊接到那些,甚至只需焊接一些電線。
This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
The highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator.
This board also breaks out each of the XBee’s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Documents:
相關商品
-
Grove – NFC 近場通訊模組 seeed原廠
0 滿分 5 分Grove – NFC 近場通訊是指短距離的無線通訊技術,應用的場合包括門禁管理系統和移動支付系統。近場通訊模塊集成了PN532收發芯片,在13.56MHz下無需接觸即可通訊,支持讀寫工作在13.56MHz的標籤,或者兩個近場通訊模塊可以完成點對點通信。近場通訊模塊配有的通訊接口包括I2C和UART,UART為默認的通訊方式。另外,模塊的天線引出的設計,無論你使用哪種盒子,都能方便地引出天線,給其他的設計騰出空間。
NT$762NT$680 未稅加入購物車Quick View -
433 868 915MHz Ultra low power data radio module 低功耗無線數據傳輸模組 內附天線
0 滿分 5 分低功耗無線數據傳輸模組內附天線
加入購物車Quick View -
Dragino LoRa 擴展板- 433M frequency 相容Arduino seeed原廠
0 滿分 5 分Dragino LoRa 433M frequency Arduino專用 Lora 擴展版
Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$860 未稅加入購物車Quick View -
HX1838 紅外線接收遙控模組 紅外接收模組
0 滿分 5 分HX1838遙控模組 紅外接收模組
- 感測器採用HX1838,靈敏度高
- 工作電壓5V
- 輸出形式:數位量輸出
- 設有固定螺栓孔,方便安裝
- 小板PCB尺寸:1.9cm * 1.4cm
- 電源指示燈(紅色)
NT$85NT$38 未稅加入購物車Quick View -
HC-11 433 轉串口 C1101 模組低功耗單片機開發遠距離模組
0 滿分 5 分HC-11 433 轉串口 C1101 模組低功耗單片機開發遠距離模組
NT$219NT$190 未稅加入購物車Quick View -
315MHz Simple RF Link Kit 無線通訊工具包 發射接收模組
0 滿分 5 分315MHz Simple RF Link Kit 無線通訊工具包 發射接收模組
工作電壓:3-12V
工作頻率:315MHz
待機電流:0mA
工作電流:20-28mA
傳輸距離:>500m(開闊地接收板靈敏度在-103dBm以上距離)
輸出功率:16dBm (40mW)
傳輸速率:<10Kbps
調製方式:OOK(調幅)
工作溫度:-10℃~+70℃
尺寸:19×19×8mmNT$57NT$48 未稅加入購物車Quick View -
38khz 紅外線發射模組
0 滿分 5 分紅外線發射模組
◎ Arduino 專用模組,端口與感測擴充板相容
◎ 帶有發射狀態指示燈,方便測試
◎ 提供範例程式測試NT$71NT$48 未稅加入購物車Quick View -
Grove – NFC Tag 近場通訊標籤模組 seeed原廠
0 滿分 5 分Grove – NFC Tag 是一款基於意法半導體M24LR64E-R集成解決方案的近場標籤模塊。通過I2C接口與主機通信,內建64位唯一識別碼同時集成了64Kbit EEPROM。模塊外擴了一個PCB天線,可以很方便安裝到您設計的結構中。
NT$848NT$700 未稅加入購物車Quick View -
Grove-LoRa-E5 (STM32WLE5JC)無線傳輸模組 868/915 MHz,支援LoRaWAN seeed原廠
0 滿分 5 分內置LoRa-E5 STM32WLE5JC的Grove LoRa-E5由ARM Cortex M4超低功耗MCU內核和LoRa SX126x供電,是一種易於使用的無線模塊,支持EU868和US915頻率上的LoRaWAN協議,並且(G )FSK,BPSK,(G)MSK,LoRa調製。
NT$714NT$560 未稅加入購物車Quick View -
Dragino LoRa Shield v95- 868M frequency Arduino Lora 擴展板 seeed原廠
0 滿分 5 分Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$800 未稅加入購物車Quick View