XBee Explorer Dongle sparkfun 原廠
NT$933 NT$848 未稅
This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
尚有庫存
- 商品說明
商品說明
這是Digi XBee模塊系列的SparkFun XBee Explorer Dongle單元。使用XBee Explorer Dongle,您可以將設備直接插入USB端口,並將其作為計算機和XBee之間的網關。不需要電纜!本機適用於所有XBee模塊,包括1系列和2.5系列,標準版和專業版。板載穩壓器最高可達500mA。
該主板的亮點是FT231X USB轉串口轉換器。這就是在您的計算機和XBee之間轉換數據的原因。還有一個複位按鈕和一個電壓調節器,為XBee提供充足的電力。此外,如果您需要調試XBee,有四個LED可以提供幫助:RX,TX,RSSI(信號強度指示器)和電源指示燈。
該板還將每個XBee的I / O引腳分成一對麵包板兼容的接頭。因此,如果您想要使用XBee的擴展功能,您可以將一些插頭引腳焊接到那些,甚至只需焊接一些電線。
This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee. No cables needed! This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. The on-board voltage regulator is good up to 500mA.
The highlight of this board is an FT231X USB-to-Serial converter. That’s what translates data between your computer and the XBee. There’s also a reset button, and a voltage regulator to supply the XBee with plenty of power. In addition, there are four LEDs that’ll help if you ever need to debug your XBee: RX, TX, RSSI (signal-strength indicator), and power indicator.
This board also breaks out each of the XBee’s I/O pins to a pair of breadboard-compatible headers. So if you want to make use of the XBee’s extended functionality, you can solder some header pins into those, or even just solder some wire.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Documents:
相關商品
-
PN532 NFC RFID V3 模組 近場通訊 支持 Android 手機通訊
0 滿分 5 分PN532 NFC RFID V3 模組 近場通訊 支持 Android 手機通訊
NFC又稱近距離無線通信,是一種短距離的高頻無線通信技術,允許電子設備之間進行非接觸式點對點數據傳輸交換數據。這個技術由免接觸式射頻識別(RFID)演變而來,並向下兼容RFID,最早由Sony和Philips各自開發成功,主要用於手機等手持設備中提供M2M(Machine to Machine)的通信。由於近場通訊具有天然的安全性,因此,NFC技術被認為在手機支付等領域具有很大的應用前景。
NT$476NT$257 未稅加入購物車Quick View -
HX1838 紅外線接收遙控模組 紅外接收模組
0 滿分 5 分HX1838遙控模組 紅外接收模組
- 感測器採用HX1838,靈敏度高
- 工作電壓5V
- 輸出形式:數位量輸出
- 設有固定螺栓孔,方便安裝
- 小板PCB尺寸:1.9cm * 1.4cm
- 電源指示燈(紅色)
NT$85NT$38 未稅加入購物車Quick View -
加入購物車Quick View
NRF24L01+工業級遠距離升級版3.3V 2.4G無線收發模組
0 滿分 5 分加入購物車Quick View -
LoRa 無線傳輸模組 SX1278/1276 LoRa 8000m 擴頻技術 傳輸模組 1W(30dBm)含專用天線
0 滿分 5 分加入購物車Quick View -
Dragino LoRa Shield v95- 868M frequency Arduino Lora 擴展板 seeed原廠
0 滿分 5 分Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$800 未稅加入購物車Quick View -
加入購物車Quick View
匯承HC-08 低功耗 BLE CC2540 藍芽模組 4.0 主機/從機一體化 藍牙轉串口
0 滿分 5 分帶底板針腳(附排針需自行焊接)
HC-08 藍芽串口通信模組是新一代的基於Bluetooth Specification V4.0 BLE 藍芽協議的通訊模組。無線工作頻段為2.4GHz ISM,調製方式是GFSK。模組最大發射功率為4dBm,接收靈敏度-93dBm,空曠環境下和iphone4s 可以實現80 米超遠距離通信。模組採用郵票孔封裝方式,可貼片焊接,模組大小26.9mm×13mm×2.2mm,很方便客戶嵌入應用系統之內。
模組採用TI 的CC2540 晶片,配置256K Byte 空間,支援AT 指令,用戶可根據需要更改角色(主、從模式)以及UART串列傳輸速率、設備名稱等參數,使用靈活。
加入購物車Quick View -
Seeed BLE Shield (HM11) 藍牙擴展板 相容 arduino seeeduino
0 滿分 5 分Seeed BLE Shield 是一款低功耗藍牙4.0傳輸模組。模塊採用的是TI CC2540 晶片,配置256Kb空間,支持AT指令。你可以將此模塊應用於遙控、遊戲手柄、數據無線採集、智慧家居等領域。同時作為Shield系列的一員,它能很方便的直插到開發板上使用。
NT$724NT$500 未稅加入購物車Quick View -
HC-06 藍芽轉 UART 從機藍芽模組 具底板,提供Arduino 範例
0 滿分 5 分請勿將電源接到信號腳上,會直接燒壞模組!
兼容版跟原裝版的功能操作方法都相同!
加入購物車Quick View -
38KHz 紅外線接收模組
0 滿分 5 分38KHz 紅外線接收模組/數位感測器模組/紅外線接收器 for Arduino 與樹莓派
Arduino 專用模組,端口與感測擴充板相容
38KHz 紅外接收頭,可接受各種紅外遙控信號NT$57NT$48 未稅加入購物車Quick View -
Grove – Infrared Receiver 紅外接收模組 seeed原廠
0 滿分 5 分NT$180NT$140 未稅加入購物車Quick View