- 商品說明
商品說明
Wio Terminal Battery Chassis 鋰電池擴充盒-內置650mAH鋰電池,帶6個Grove接口
Wio鋰電池擴充盒是Wio開發板的必備擴展板,因為它為Wio終端提供了外部電源,以增強其便攜性和緊湊性。它具有650mAH可充電鋰聚合物電池,4個Grove模擬/數字端口,1個Grove I2C端口和1個Grove UART端口,以及美觀的ABS防護外殼。Wio終端電池機箱的背面也有相同的Raspberry Pi 40引腳兼容GPIO,以提供更多附加組件!
借助Wio終端開發板 + Wio鋰電池擴充盒,您可以輕鬆構建最強大最密集的IoT項目。
特徵
- 內置650mAh可充電鋰聚合物電池
- USB Type-C充電
- 過流保護
- 打ic模式/打ic保護
- 4個Grove模擬/數字端口
- 1個Grove I2C端口
- 1個Grove UART端口
- 磁鐵隱藏在外殼內,因此可以將其粘貼在白板上!
引腳圖
技術指標
- Wio鋰電池擴充盒可由USB TYPE-C型接口或內部電池供電。USB Type-C的最大輸入電流為2A,輸入電壓範圍為4.75V〜5.25V。
- 內置電池是可充電鋰聚合物電池,容量為650mAh。的電池輸出電壓是3.7V,4.2V用的電池充電的電壓。
- 電池只能通過USB Type-C接口充電,而不能通過母連接器或Grove接口充電。
- Wio鋰電池擴充盒的待機電流小於300uA。
- Wio鋰電池擴充盒通過USB Type-C接口供電時具有過流保護,並且過流保護的電流閾值為2.5A。
- 當Wio鋰電池擴充盒箱在電池供電模式下短路時,它將進入打cup模式。短路消除後,它將自動返回正常電源模式。
預防措施
- Wio鋰電池擴充盒本身無法輸出3.3V電壓,只能輸出5V電壓。要輸出3.3V,必須與Wio Terminal一起使用。
- 當Wio鋰電池擴充盒從電池充電模式切換到電池電源模式時,會有1.2s的電壓下降時間。
- 默認情況下,當Wio鋰電池擴充盒未連接到USB Type-C時,由電池供電。插入USB Type-C後,它會自動切換到USB Type-C供電。
- 將Wio鋰電池擴充盒插入USB Type-C時,它將為電池和連接器上的RPI_5V引腳供電。此時,電池將無法供電。如果鋰電池未充滿電,則充電至100%後將停止充電。
出貨清單
- Wio鋰電池擴充盒x1
Documents
=========================================================
Wio Terminal Chassis – Battery
Description
The Wio Terminal Battery Chassis is a must-have extension board for Wio-Terminal Dev Board as it provides an external power source for Wio Terminal to enhance its portability and compactness. It has a 650mAH rechargeable lithium polymer battery, battery charging/discharging status LED, 4 Grove Analog/Digital Ports, 1 Grove I2C Port, and 1 Grove UART Port, as well as the ABS enclosure for aesthetic and protection. There is also the same Raspberry Pi 40-pin compatible GPIO at the back of the Wio Terminal Battery Chassis for more add-ons!
With Wio-Terminal Dev Board + Wio Terminal Battery Chassis, you are able to build the most powerful and compact IoT projects with no ease. With the extended Grove Ports, you can enjoy the plug and play features of the Grove Ecosystem!
The new version battery board built-in BQ27441-G1A fuel gauge for LiPo batteries.
Feature
- Built-in 650mAh Rechargeable Lithium Polymer Battery
- Battery charging/discharging status LED
- Battery On/OFF Button
- Built-in BQ27441-G1A fuel gauge for LiPo batteries
- USB Type-C Charging
- Overcurrent protection
- Hiccup mode/Hiccup Protection
- 4 x Grove Analog/Digital Port
- 1 x Grove I2C Port
- 1 x Grove UART Port
- Magnets are hidden inside the enclosure so that it can be stuck on the Whiteboard!
Certifications
- MSDS: Material Safety Data Sheet
- UN38.3: UN38.3 Test Report
- Air/Sea Certification for Safe Transport
- 1.2m Drop Test Report
- RoHS: RoHS Test Report
Pinout Diagram
Specifications
Item | Detail |
---|---|
Power Supply | 4.75V – 5.25V |
Built-in battery | 650mAh |
Charging current | Max: 660mA |
battery board mode | Green LED: Light On is mean the board charing.
Red LED: Light on is mean the OTG(battery discharge) enable. Yellow LED: Light on is mean the male interface output/input 5V. |
Grove Interface | Grove Analog/Digital * 4, Grove I2C * 1, Grove UART * 1 |
Precautions
- If the battery is unattached, the chassis will switch to failure mode, and the green light blinks at a frequency of 1Hz.
- Please press the button to let the chassis entering sleep mode for safety consideration, and the LED on the backside of the chassis will go off.
Part List
- Wio Terminal Battery Chassis
相關商品
-
加入購物車Quick View
Grove – Multichannel Gas Sensor v2 多通道有害氣體感測器 seeed原廠
0 滿分 5 分加入購物車Quick View -
Grove – Dust Sensor(PPD42NS)細懸浮微粒 pm2.5 粉塵傳感器 seeed原廠
0 滿分 5 分NT$476NT$360 未稅加入購物車Quick View -
Grove – Recorder v3.0 錄音感測器 錄音機 語音錄放模組 seeed原廠
0 滿分 5 分NT$733NT$560 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ5) 氣體感測器 Seeed原廠
0 滿分 5 分可檢測液化石油氣,天然氣,城鎮煤氣等。基於其快速響應時間,測量可以盡快進行。且其靈敏度也可以通過電位器來進行調節。
NT$276NT$220 未稅加入購物車Quick View -
Grove – Flame Sensor 火焰感測器 seeed原廠
0 滿分 5 分NT$371NT$200 未稅加入購物車Quick View -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測傳感器 seeed原廠
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模塊。他的工作頻率在42KHz,適合用於中距離或近距離的探測。已經附上 Arduino 函數庫。
NT$190NT$140 未稅加入購物車Quick View -
Grove – GPS Module 衛星模組 適用於 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分Grove – GPS模組是一款低成本及可程式設計的GPS模組,可用於手持設備GPS資料的採集。模組採用串口通信,可通過串口進行資料的讀取。它設有一個50通道的u-blox 5定位引擎,首次定位時間(TTFF)小於1s。跟蹤和採集的靈敏度均達到-160dBm,適用於個人導航及位置服務的專案。
NT$857NT$700 未稅加入購物車Quick View -
Grove – EMG Detector 肌電圖 檢測儀 肌肉信號傳感器/感測器 肌電檢測器 seeed原廠
0 滿分 5 分傳感器採集小肌肉信號然後進行第2次放大和濾波,輸出信號可以被Arduino識別。
NT$1,486NT$1,320 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – Digital Light Sensor 數位型光敏感測器 偵測光亮強度傳感器 seeed原廠
0 滿分 5 分NT$400NT$320 未稅加入購物車Quick View