Wifi Shield V2.0 Arduino/ Seeeduino 無線網路 wifi 擴展板 seeed原廠
NT$1,762 NT$1,420 未稅
尚有庫存
- 商品說明
商品說明
Wifi Shield V2.0 Arduino 無線網路 wifi 擴展板
WiFi Shield V2.0擴展板配置RN171 TCP/IP無線模組,可讓Arduino / Seeeduino連接高達802.11b / g的無線網絡。 RN171無線模組支持TCP,UDP,FTP和HTTP通信協議,可以滿足大多數無線和物聯網(IoT)網絡項目的需求,例如智能家居網絡,機器人控件和個人氣象站。
屏蔽層覆蓋範圍廣,並通過新的穩定的車載天線傳輸強信號。 Arduino的默認通信協議是UART / Serial,您可以通過我們合併的兩根跳線選擇用於RX和TX的數字引腳(D0至D7)。 屏蔽層還具有兩個I2C和串行的Grove連接器,以使其可以與任何其他Groves一起插入。
特徵
- 帶有分步教程的各種演示
- 低功耗
- 與Arduino兼容,易於上手
- CMD支持
規格
- 外型尺寸:100毫米x65毫米x30毫米
- 重量:毛重41g
- 電池:排除
- 電壓:3.3〜5.5伏
- 當前:25〜400毫安
- 發射功率:0-10 dBm
- 頻率:2402〜2480 MHz
- 接口:UART(軟件串行,可以將數字引腳選擇為RN171的RX和TX)
- 網路速率:802.11b為1-11 Mbps 802.11g為6-54Mbps
- 安全的WiFi身份驗證:WEP-128,WPA-PSK(TKIP),WPA2-PSK(AES)
- 內置網絡應用:DHCP客戶端,DNS客戶端,ARP,ICMP ping,FTP,TELNET,HTTP,UDP,TCP
- RN-171:WIFLY GSX 802.11 b / g無線局域網模塊。
出貨清單
- Wifi Shield V2.0 x1
Documents
- [Wiki] Wifi Shield V2.0
- WiFi Shield V2.0 Eagle Files
- Schematic PDF
- RN-171 Datasheet
- Wifi Shield Library
- WiFi Module User Manual — This is where you’ll find all the commands for the RN-171 module in the shield.
- What is a Seeeduino
- w3schools Great website to learn HTML, Javascript, and JQuery
Wifi Shield V2.0
Featured with RN171 TCP/IP module, the WiFi shield allows your Arduino/Seeeduino to connect wireless networks up to 802.11b/g. The RN171 module supports TCP, UDP, FTP and HTTP communication protocols, which meet the needs of most wireless and Internet of Things (IoT) network projects, such as smart home networks, robots controls and personal weather stations.
The shield covers a wide range and transmit strong signals with the newly, stable on-board antenna. The default communication protocol with the Arduino is UART/Serial, and you can select which digital pins (D0 to D7) to use for RX and TX with the two jumper rows we’ve incorporated. The shield also has two Grove connectors of I2C and Serial to make it can be plugged with any other Groves.
The shield is well documented with demos and you can check the User Manual here online.
Features
- Various demos with step-by-step tutorials
- Low power consumption
- Compatible with Arduino, easy to get started with
- CMD Support
Technical details
Dimensions | 100mm x65mm x30mm |
Weight | G.W 41g |
Battery | Exclude |
Voltage | 3.3~5.5 V |
Current | 25~400mA |
Transmit power | 0-10 dBm |
Frequency | 2402~2480 MHz |
Interface | UART (Software serial, you can choose the digital pins as RX and TX of RN171) |
Network rate | 1-11 Mbps for 802.11b/6-54Mbps for 802.11g |
Secure WiFi authentication | WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES) |
Built-in networking applications | DHCP client, DNS client, ARP, ICMP ping, FTP, TELNET, HTTP, UDP, TCP |
RN-171 | WIFLY GSX 802.11 b/g Wireless LAN Module. |
相關商品
-
Grove – Digital Light Sensor 數位型光敏感測器 偵測光亮強度傳感器 seeed原廠
0 滿分 5 分NT$400NT$320 未稅加入購物車Quick View -
Grove – Flame Sensor 火焰感測器 seeed原廠
0 滿分 5 分NT$371NT$200 未稅加入購物車Quick View -
Grove – 433Mhz RF link kit RF 無線接收發射傳輸模組 seeed原廠
0 滿分 5 分該模組由發射器和接收器組成,廣泛用於遙控。
NT$276NT$160 未稅加入購物車Quick View -
Grove – Serial Camera Kit 串列通訊攝影機鏡頭套件 seeed原廠
0 滿分 5 分本套件中提供了兩種規格的鏡頭。標準配置用於普通照片拍攝,廣角拍攝特別適用於監控項目。
加入購物車Quick View -
Grove – GPS Module 衛星模組 適用於 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分Grove – GPS模組是一款低成本及可程式設計的GPS模組,可用於手持設備GPS資料的採集。模組採用串口通信,可通過串口進行資料的讀取。它設有一個50通道的u-blox 5定位引擎,首次定位時間(TTFF)小於1s。跟蹤和採集的靈敏度均達到-160dBm,適用於個人導航及位置服務的專案。
NT$857NT$700 未稅加入購物車Quick View -
Grove – Gas Sensor(MQ9) 瓦斯氣體 一氧化碳偵測感測器 seeed原廠
0 滿分 5 分NT$300NT$280 未稅加入購物車Quick View -
Grove – Relay 繼電器模組 ( 峰值電壓能力250V 10安培) 支援 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分繼電器是數位電路常用的控制開關元件,可用於控制更高的電壓和電流。設置為高電位時,指示燈會亮,繼電器ON。
NT$143NT$120 未稅加入購物車Quick View -
Grove – Screw Terminal 4P 螺絲端子座 額定功率可達 125V@6A seeed原廠
0 滿分 5 分NT$100NT$80 未稅加入購物車Quick View -
Grove – GSR Sensor 測謊器 皮膚電阻感測器 流汗感測器 seeed原廠
0 滿分 5 分NT$433NT$320 未稅加入購物車Quick View -
Grove – Sound Sensor 聲音感測器 seeed原廠
0 滿分 5 分聲音感測模組是一個麥克風元件,它可以用於檢測偵測環境中的聲音強度。而偵測到的資料輸出的值可以由電位進行調整。
NT$238NT$180 未稅加入購物車Quick View