Wifi Shield V2.0 Arduino/ Seeeduino 無線網路 wifi 擴展板 seeed原廠
NT$1,762 NT$1,420 未稅
尚有庫存
- 商品說明
商品說明
Wifi Shield V2.0 Arduino 無線網路 wifi 擴展板
WiFi Shield V2.0擴展板配置RN171 TCP/IP無線模組,可讓Arduino / Seeeduino連接高達802.11b / g的無線網絡。 RN171無線模組支持TCP,UDP,FTP和HTTP通信協議,可以滿足大多數無線和物聯網(IoT)網絡項目的需求,例如智能家居網絡,機器人控件和個人氣象站。
屏蔽層覆蓋範圍廣,並通過新的穩定的車載天線傳輸強信號。 Arduino的默認通信協議是UART / Serial,您可以通過我們合併的兩根跳線選擇用於RX和TX的數字引腳(D0至D7)。 屏蔽層還具有兩個I2C和串行的Grove連接器,以使其可以與任何其他Groves一起插入。
特徵
- 帶有分步教程的各種演示
- 低功耗
- 與Arduino兼容,易於上手
- CMD支持
規格
- 外型尺寸:100毫米x65毫米x30毫米
- 重量:毛重41g
- 電池:排除
- 電壓:3.3〜5.5伏
- 當前:25〜400毫安
- 發射功率:0-10 dBm
- 頻率:2402〜2480 MHz
- 接口:UART(軟件串行,可以將數字引腳選擇為RN171的RX和TX)
- 網路速率:802.11b為1-11 Mbps 802.11g為6-54Mbps
- 安全的WiFi身份驗證:WEP-128,WPA-PSK(TKIP),WPA2-PSK(AES)
- 內置網絡應用:DHCP客戶端,DNS客戶端,ARP,ICMP ping,FTP,TELNET,HTTP,UDP,TCP
- RN-171:WIFLY GSX 802.11 b / g無線局域網模塊。
出貨清單
- Wifi Shield V2.0 x1
Documents
- [Wiki] Wifi Shield V2.0
- WiFi Shield V2.0 Eagle Files
- Schematic PDF
- RN-171 Datasheet
- Wifi Shield Library
- WiFi Module User Manual — This is where you’ll find all the commands for the RN-171 module in the shield.
- What is a Seeeduino
- w3schools Great website to learn HTML, Javascript, and JQuery
Wifi Shield V2.0
Featured with RN171 TCP/IP module, the WiFi shield allows your Arduino/Seeeduino to connect wireless networks up to 802.11b/g. The RN171 module supports TCP, UDP, FTP and HTTP communication protocols, which meet the needs of most wireless and Internet of Things (IoT) network projects, such as smart home networks, robots controls and personal weather stations.
The shield covers a wide range and transmit strong signals with the newly, stable on-board antenna. The default communication protocol with the Arduino is UART/Serial, and you can select which digital pins (D0 to D7) to use for RX and TX with the two jumper rows we’ve incorporated. The shield also has two Grove connectors of I2C and Serial to make it can be plugged with any other Groves.
The shield is well documented with demos and you can check the User Manual here online.
Features
- Various demos with step-by-step tutorials
- Low power consumption
- Compatible with Arduino, easy to get started with
- CMD Support
Technical details
Dimensions | 100mm x65mm x30mm |
Weight | G.W 41g |
Battery | Exclude |
Voltage | 3.3~5.5 V |
Current | 25~400mA |
Transmit power | 0-10 dBm |
Frequency | 2402~2480 MHz |
Interface | UART (Software serial, you can choose the digital pins as RX and TX of RN171) |
Network rate | 1-11 Mbps for 802.11b/6-54Mbps for 802.11g |
Secure WiFi authentication | WEP-128, WPA-PSK (TKIP), WPA2-PSK (AES) |
Built-in networking applications | DHCP client, DNS client, ARP, ICMP ping, FTP, TELNET, HTTP, UDP, TCP |
RN-171 | WIFLY GSX 802.11 b/g Wireless LAN Module. |
相關商品
-
Grove – Gas Sensor(MQ2) 煙霧氣體感測器 seeed原廠
0 滿分 5 分檢測的氣體包括異丁烷,液化石油氣,甲烷,乙醇,氫氣,煙霧等。感測器的回應速度快,便於實際的測量。通過板上的電位器調整輸出精度
NT$257NT$220 未稅加入購物車Quick View -
Grove – GPS Module 衛星模組 適用於 Arduino 與 Raspberry Pi seeed原廠
0 滿分 5 分Grove – GPS模組是一款低成本及可程式設計的GPS模組,可用於手持設備GPS資料的採集。模組採用串口通信,可通過串口進行資料的讀取。它設有一個50通道的u-blox 5定位引擎,首次定位時間(TTFF)小於1s。跟蹤和採集的靈敏度均達到-160dBm,適用於個人導航及位置服務的專案。
NT$857NT$700 未稅加入購物車Quick View -
Grove – Digital Light Sensor 數位型光敏感測器 偵測光亮強度傳感器 seeed原廠
0 滿分 5 分NT$400NT$320 未稅加入購物車Quick View -
Grove – Flame Sensor 火焰感測器 seeed原廠
0 滿分 5 分NT$371NT$200 未稅加入購物車Quick View -
Grove – Dust Sensor(PPD42NS)細懸浮微粒 pm2.5 粉塵傳感器 seeed原廠
0 滿分 5 分NT$476NT$360 未稅加入購物車Quick View -
Grove – Chainable RGB LED 全彩 RGB 可串接式 LED 模組 seeed原廠
0 滿分 5 分Grove – Chainable RGB LED是基於P9813全彩LED驅動晶片的RGB LED模塊。它支持串接,最多可同時串接1024個同類模組。
NT$162NT$120 未稅加入購物車Quick View -
Grove – UV Sensor UV 紫外線感測器 seeed原廠
0 滿分 5 分NT$457NT$300 未稅加入購物車Quick View -
Grove – GSR Sensor 測謊器 皮膚電阻感測器 流汗感測器 seeed原廠
0 滿分 5 分NT$433NT$320 未稅加入購物車Quick View -
Grove – EMG Detector 肌電圖 檢測儀 肌肉信號傳感器/感測器 肌電檢測器 seeed原廠
0 滿分 5 分傳感器採集小肌肉信號然後進行第2次放大和濾波,輸出信號可以被Arduino識別。
NT$1,486NT$1,320 未稅加入購物車Quick View -
Grove – Ultrasonic Ranger 超音波測距模組 距離探測傳感器 seeed原廠
0 滿分 5 分Grove – Ultrasonic Sensor是一個非接觸式的距離探測模塊。他的工作頻率在42KHz,適合用於中距離或近距離的探測。已經附上 Arduino 函數庫。
NT$190NT$140 未稅加入購物車Quick View