WEMOS D1 R2 V2.1 開發板 基於ESP8266 WEMOS Electronics 原廠出貨
NT$352 NT$300 未稅
WEMOS原廠2021年後生產的機板上不再有印刷WEMOS字樣,僅晶片鐵殼保留WeMos印刷字樣。
- 1 piece – Wemos D1 R2 Version 2.1 ESP8266 Development Board
- More than enough straight male header pins to solder into all of the open through-holes on the board
尚有庫存
- 商品說明
商品說明
WEMOS D1 R2 V2.1 開發板 基於ESP8266 WEMOS Electronics 原廠出貨
WEMOS D1 R2 是一款基於 ESP8266-EX 的基於WiFi的微處理器,具有Arduino UNO 大小面積。傳感器和輸出設備將在WeMos-D1 R2上工作,並具有內建 WiFi 的附加優勢。
- 1 piece – Wemos D1 R2 Version 2.1 ESP8266 Development Board
- More than enough straight male header pins to solder into all of the open through-holes on the boardWEMOS D1 R2 SPECIFICATIONS:
- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/pwm/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V 最高輸入電壓不要超過12V
- Output: 5V at 1A Max
- Board Dimensions: 68.6mm x 53.4mm (2.701″ x 2.102″) / Long x Wide
- Weight: 21.8g (0.769oz)
WEMOS D1 R2 RESOURCES:
- Tutorials:
- Getting Started Tutorial (Using Arduino IDE)
- Arduino IDE Board Manager URL: http://arduino.esp8266.com/stable/package_esp8266com_index.json
- Getting Started Tutorial (Using NodeMCU)
- Getting Started Tutorial (Using Arduino IDE)
- CH340G Driver:
You will need to install a driver for your computer to recognize the on-board CH340G USB to serial converter.
If you are using Codebender online you do not need to install a driver.
- ESP8266:
- D1 R2 Board Schematic
- Example sketch for fading on-board LED (.zip download)We flash this onto each board before shipping them to you
相關商品
-
Relay Shield V2 for WEMOS D1 mini 一路5V繼電器模組
0 滿分 5 分NT$67NT$60 未稅加入購物車Quick View -
NodeMcu 底座擴展板 NodeMcu Lua WIFI 開發板 ESP8266 串口擴展板 For V3 CH340版本
0 滿分 5 分NT$143NT$100 未稅加入購物車Quick View -
Wio Link 物聯網開發模組 輕鬆打造智能居家環境 seeed原廠
0 滿分 5 分Wio Link 物聯網開發模組
Wio Link 是簡化你的物聯網專案開發的最佳利器。這是一個基於開源ESP8266 Wi-Fi的開發板,通過虛擬化隨插即用模塊的RESTful API與移動應用程序創建的物聯網應用。建設物聯網應用的傳統方法包括電子工程、微控制器程式設計、網路程式設計、物聯網協定處理和應用開發。每一步都涉及到各種硬體和軟件知識和挑戰。這一次,我們定義的創造物聯網應用的一種新方法。沒有硬體程式設計。沒有麵包板。無跳線。沒有焊接。3個步驟。五分鐘建立自己的物聯網應用!
- 開源Wi-Fi開發板
- 基於 ESP8266 基礎
- 模組化隨插即用
- REST風格的API和移動應用程序
- 5分鐘建立物聯網應用
NT$457NT$400 未稅加入購物車Quick View -
加入購物車Quick View
Battery Shield For WeMos D1 mini 單節鋰電池充電 電池升壓屏蔽
0 滿分 5 分Battery Shield V1.1.0 For WeMos D1 mini 單節鋰電池充電和電池升壓屏蔽
Battery Shield V1.1.0 For WeMos D1 mini & D1 mini pro single lithium battery charging & boost
搭配本擴展板, 您可以將 D1 mini 放在任何地方,使用此電池升壓+ 18650 單節鋰電池或103450鋰電池擴展模組
- 18650103450 為 3.3v 而 D1 mini pro 需要 5V, 本擴展板具備升壓功能,只需將鋰電池連接到該屏蔽層,為整個D1迷你係統提供電源。
- 充電時,當電池電量耗盡時,您不需要拔掉電池,只需使用usb端口進行充電。
加入購物車Quick View -
WeMos D1 ESP Wroom 02 開發板 ESP8266+18650 電池座
0 滿分 5 分NT$381NT$240 未稅加入購物車Quick View -
加入購物車Quick View
Micro SD Shield for D1 mini wifi 記憶卡擴展底板
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
DHT Shield for D1 mini DHT11 Singlebus 數字溫濕度感測器擴展模組
0 滿分 5 分DHT Shield for WeMos D1 mini DHT11 Single-bus 數字溫濕度感測器擴展模組
DHT Shield for WeMos D1 mini DHT11 Single-bus digital temperature and humidity sensor module sensor
加入購物車Quick View -
Adafruit HUZZAH ESP8266 Breakout
0 滿分 5 分Adafruit HUZZAH ESP8266 Breakout
Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low cost modules are not breadboard friendly, don’t have an onboard 500mA 3.3V regulator or level shifting, and aren’t CE or FCC emitter certified….UNTIL NOW!
NT$457NT$440 未稅加入購物車Quick View -
Grove – UART WiFi V2 無線網路模組 / 串口通訊模組 ESP8285 晶片
0 滿分 5 分Grove UART WiFi ESP8285 是一個串行無線網路收發器模組,具有無所不在的物聯網 ESP8285的SoC。
NT$524NT$420 未稅加入購物車Quick View -
WEMOS D1 LOLIN32 V1.0.0 ESP-32 基於WIFI和藍牙 4MB記憶體
0 滿分 5 分NT$476NT$380 未稅加入購物車Quick View