TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
NT$214 NT$160 未稅
TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
TB6612FNG電機驅動模塊小體積高性能超L298N 自平衡小車3PI配套. 該模塊相對於傳統的L298N效率上提高很多,體積上也大幅度減少,在額定範圍內,芯片基本不發熱,當然也就顯得更加嬌貴,所以我們建議有一定動手能力的朋友使用,接線的時候務必細心細心再細心,注意正負極性。
尚有庫存
- 商品說明
商品說明
TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
TB6612FNG電機驅動模塊小體積高性能超L298N 自平衡小車3PI配套
該模塊相對於傳統的L298N效率上提高很多,體積上也大幅度減少,在額定範圍內,芯片基本不發熱,當然也就顯得更加嬌貴,所以我們建議有一定動手能力的朋友使用,接線的時候務必細心細心再細心,注意正負極性。
Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1″ pitch headers ; the pins are arranged such that input pins are on one side and output pins are on the other. Features:
- Power supply voltage: VM=15V max, VCC=2.7-5.5V
- Output current: Iout=1.2A(average) / 3.2A (peak)
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- All pins of the TB6612FNG broken out to 0.1″ spaced pins
- Filtering capacitors on both supply lines
相關商品
-
兩驅 2WD 智慧小車 自走車 機器人 底盤開發套件組
0 滿分 5 分Arduino ,樹莓派 適用 兩驅 2WD 智慧小車 / 自走車/ 機器人 底盤開發套件組
小車都以散件形式發貨(便於運輸),附有3D安裝圖紙,拿到手後按照圖紙只要十分鐘就可以安裝完成,非常簡單,您可以利用本開發套件組結合 Arduino 或者樹莓派或其他單片機開發出您專屬的智慧小車。本套件全新升級不加價,底盤加大16CM*22CM,長寬比普通三輪小車分別加大2CM,巡線擺動更穩定,TT電機支架加厚2MM,比原來老款車型堅固、載重能力安裝方便,結構合理,結實耐用。
NT$457NT$286 未稅加入購物車Quick View -
ULN2003 步進馬達 驅動模組 + 5V步進馬達(4相5線 28BYJ-48-5V)
0 滿分 5 分新款 ULN2003步進馬達驅動模組 + 5V步進馬達(4相5線 28BYJ-48-5V)
使用 ULN2003 大功率達林頓晶片驅動步進電機,A、B、C、D 發光二極體指示四相步進電機工作時的狀態,配有步進電機的標準介面,使用時可直接拔插。
NT$114NT$95 未稅加入購物車Quick View -
L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
0 滿分 5 分L9110S 雙通道直流電機驅動模組 , 兩路步進電機驅動板
L9110S 直流電機驅動板, 板載2個L9110S馬達控制晶片, 模組可以同時驅動2個直流電機或1個4線2相式步進電機, 模組輸入電壓:2.5-12V , 每通道具有800mA連續電流輸出能力
NT$52NT$40 未稅加入購物車Quick View -
3V-6V 方形微型 直流馬達
0 滿分 5 分3V-6V 方形微型直流馬達 直流玩具馬達,微型小電機
- 【長度】25mm
- 【直徑】21mm
- 【軸徑】2mm
- 【軸長】9mm
- 【電壓】3-6V
NT$29NT$24 未稅加入購物車Quick View -
MG996R 55G 90度-180度 金屬齒輪伺服器 舵機
0 滿分 5 分MG996R 90-180度 金屬齒輪伺服器 舵機 ,數位式 11 KG大扭力舵機/伺服馬達
脈寬信號 500-1500-2500,對應的角度是-90度~+90度
最新大扭力舵機MG996R (MG995升級產品)6v/11Kg ,原MG995的升級產品,是目前市場上較具性價比大扭力舵機之一
NT$305NT$257 未稅加入購物車Quick View -
加入購物車Quick View
DC 3V-6V 塑膠 直流減速馬達 減速比1:48
0 滿分 5 分單軸、雙軸 兩種規格可供選擇
加入購物車Quick View -
USB 32路舵機控制器 舵機控制板 支援PS2 搖桿 相容Arduino 藍板
0 滿分 5 分本產品最大的優勢是:可以使用電腦軟件控制機器人,或者控制你的舵機。可以同時控制32個舵機、精度很高(1us)、採用美國原裝進口的32位CPU,內部集成USB通訊接口,穩定性和精度極高。可以同時控制多達32個伺服電機協調動作,具有位置控制以及速度控制,既可以用PC機上的軟件來控制,也可以通過MCU(51、AVR、ARM、FPGA、PIC等)中的UART通訊( TTL電平的串口)發命令來控制舵機,也可以將PC機上的軟件產生的指令代碼下載到伺服電機控制器,實現脫機運作。
NT$1,190NT$981 未稅加入購物車Quick View -
Adafruit DRV2605L Haptic Motor Controller 控制器 (用於蜂鳴器或震動馬達)
0 滿分 5 分DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors – buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, ‘click’ effects, different buzzer levels, or even having the vibration follow a musical/audio input.
NT$362NT$340 未稅加入購物車Quick View -
L298N DC 直流電機驅動板 步進電機驅動器 帶散熱片
0 滿分 5 分L298N DC 直流電機驅動板 步進電機驅動器 帶散熱片
現在市面上出現仿本公司模塊產品,本公司生產的L298芯片是全新正品芯片,貼片鋁電解是採用2個35V 220UF高電壓高容量電容,而仿的模塊採用的是翻新2手芯片, 35V 100UF和10V 100UF低電壓低容量電容.請大家購買時認清.以免上當受騙,把電路板全燒掉.
NT$100NT$57 未稅加入購物車Quick View -
Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
0 滿分 5 分Allegro A3967 轉譯型 步進馬達驅動板 EasyDriver Stepper Motor Driver V44
A3967 是美國allegro公司生產的pwm恆流控制微步距驅動二相步進電機專用驅動器。它的工作電壓可達30v,驅動電流達750ma,一個a3967slb即可驅動一台二相步進電機,可實現8細分驅動。芯片內部的pwm電流控制電路可通過加在pfd的電壓設置為慢、快、混合三種電流衰減模式,如果pfd端的電壓高於0.6vdd,則選擇慢衰減方式。若低於0.21vdd,則選擇快衰減模式。處於兩者之間為混合衰減模式。另外,a3967slb還能提供完善的保護措施,包括抑制瞬態電壓,過熱保護、防止電流直通、欠電壓自鎖等功能。a3967slb和微處理器之間不需要附加其他的接口電路,該芯片採easystepper 接口,將8條控制線減少了2條(步長和方向),只要簡單地輸入控制步進電機的脈衝,其內嵌的轉換器就可以實現對步進電機的控制。NT$171NT$143 未稅加入購物車Quick View