TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
NT$214 NT$160 未稅
TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
TB6612FNG電機驅動模塊小體積高性能超L298N 自平衡小車3PI配套. 該模塊相對於傳統的L298N效率上提高很多,體積上也大幅度減少,在額定範圍內,芯片基本不發熱,當然也就顯得更加嬌貴,所以我們建議有一定動手能力的朋友使用,接線的時候務必細心細心再細心,注意正負極性。
尚有庫存
- 商品說明
商品說明
TB6612FNG Dual Motor Driver 超小設計雙馬達驅動板 CJMCU
TB6612FNG電機驅動模塊小體積高性能超L298N 自平衡小車3PI配套
該模塊相對於傳統的L298N效率上提高很多,體積上也大幅度減少,在額定範圍內,芯片基本不發熱,當然也就顯得更加嬌貴,所以我們建議有一定動手能力的朋友使用,接線的時候務必細心細心再細心,注意正負極性。
Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1″ pitch headers ; the pins are arranged such that input pins are on one side and output pins are on the other. Features:
- Power supply voltage: VM=15V max, VCC=2.7-5.5V
- Output current: Iout=1.2A(average) / 3.2A (peak)
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- All pins of the TB6612FNG broken out to 0.1″ spaced pins
- Filtering capacitors on both supply lines
相關商品
-
MG996R 55G 90度-180度 金屬齒輪伺服器 舵機
0 滿分 5 分MG996R 90-180度 金屬齒輪伺服器 舵機 ,數位式 11 KG大扭力舵機/伺服馬達
脈寬信號 500-1500-2500,對應的角度是-90度~+90度
最新大扭力舵機MG996R (MG995升級產品)6v/11Kg ,原MG995的升級產品,是目前市場上較具性價比大扭力舵機之一
NT$305NT$257 未稅加入購物車Quick View -
USB 32路舵機控制器 舵機控制板 支援PS2 搖桿 相容Arduino 藍板
0 滿分 5 分本產品最大的優勢是:可以使用電腦軟件控制機器人,或者控制你的舵機。可以同時控制32個舵機、精度很高(1us)、採用美國原裝進口的32位CPU,內部集成USB通訊接口,穩定性和精度極高。可以同時控制多達32個伺服電機協調動作,具有位置控制以及速度控制,既可以用PC機上的軟件來控制,也可以通過MCU(51、AVR、ARM、FPGA、PIC等)中的UART通訊( TTL電平的串口)發命令來控制舵機,也可以將PC機上的軟件產生的指令代碼下載到伺服電機控制器,實現脫機運作。
NT$1,190NT$980 未稅加入購物車Quick View -
Adafruit DRV2605L Haptic Motor Controller 控制器 (用於蜂鳴器或震動馬達)
0 滿分 5 分DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors – buzzers and vibration motors. Normally one would just turn those kinds of motors on and off, but this driver has the ability to have various effects when driving a vibe motor. For example, ramping the vibration level up and down, ‘click’ effects, different buzzer levels, or even having the vibration follow a musical/audio input.
NT$362NT$340 未稅加入購物車Quick View -
2路電機板+16路舵機擴展板 機器人機械臂小車底盤專用擴充板 適用於Arduino
0 滿分 5 分2路電機板+16路舵機擴展板Arudino UNO 機器人機械臂小車底盤
2 Motor && 16 Servo Drive Shield是兼容Arduino UNO和ESPduino的一款電機和舵機驅動模塊。模塊採用疊插式線路板設計,可以直接接入Arduino UNO 或者ESPduino線路板。該產品可以同時控制2 路直流電機(4.5 ~36V )和16 路舵機(5 ~18V ),適合於裝有機械臂的移動機器人驅動控制。
NT$619NT$500 未稅加入購物車Quick View -
加入購物車Quick View
Grove – MOSFET 微型 繼電器 開關模組 seeed原廠
0 滿分 5 分加入購物車Quick View -
加入購物車Quick View
DC 3V-6V 塑膠 直流減速馬達 減速比1:48
0 滿分 5 分單軸、雙軸 兩種規格可供選擇
加入購物車Quick View -
L298N DC 直流電機驅動板 步進電機驅動器 帶散熱片
0 滿分 5 分L298N DC 直流電機驅動板 步進電機驅動器 帶散熱片
現在市面上出現仿本公司模塊產品,本公司生產的L298芯片是全新正品芯片,貼片鋁電解是採用2個35V 220UF高電壓高容量電容,而仿的模塊採用的是翻新2手芯片, 35V 100UF和10V 100UF低電壓低容量電容.請大家購買時認清.以免上當受騙,把電路板全燒掉.
NT$100NT$57 未稅加入購物車Quick View -
MG90S 全金屬齒舵機 14g Servo 伺服機 品質穩定
0 滿分 5 分MG90S 全金屬齒舵機 14g Servo 伺服機
- 金屬銅齒、空心杯電機、雙滾珠軸承
- 產品型號:MG90s
- 產品重量:13.6g
- 產品尺寸:22.8*12.2*28.5mm
- 產品扭力:2.0kg(4.8v)
- 產品速度:0.11s(4.8v)
- 轉動角度:最大90°
- 舵機類型:數字舵機
- 使用溫度:0°-55°
- 死區設定:5微秒
- 插頭類型:JR、FUTABA通用
- 產品結構材質:金屬銅齒、空心杯電機、雙滾珠軸承
- 附件包含:舵盤、線長30CM、固定螺釘、減振膠套及鋁套等附件(詳見實拍圖)
- 適用範圍:450電直 斜盤舵機 固定翼 航模遙控飛機
NT$114NT$86 未稅加入購物車Quick View -
L298N 四路直流步進電機驅動模組 四路電機驅動供電一體
0 滿分 5 分L298N電機驅動模組這是集成2塊L298N晶片,同時可以驅動4個直流電機,實現正反轉及電機速度的控制。
模組內部帶有LM2596S降壓晶片,如果驅動7V電壓以上的電機時,可以向外輸出5V電源,供電給控制端使用。
NT$429NT$300 未稅加入購物車Quick View -
GA12-N20 微型金屬減速馬達
0 滿分 5 分GA12-N20 微型金屬減速馬達 全金屬齒輪 體積小、扭力大、全金屬齒輪,耐用不易磨損!
可順逆/正反轉具有自鎖功能噪音小扭矩大. 電機精小,用處大,做用廣.是開發者的首選。N20 金屬馬達體積小,扭力大,電流小,減速比越大,電機運行越靜音。12 MM 直流減速馬達可用 PWM 控速。
NT$167NT$124 未稅加入購物車Quick View