Weather Shield 天氣感測擴展板 SparkFun原廠
NT$1,714 NT$1,380 未稅
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。
尚有庫存
- 商品說明
商品說明
SparkFun Weather Shield 天氣感測擴展板
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。該擴展板上還有可外加選購的感測器擴展端口,如風速,方向,雨量計和GPS,用於定位和超精准定時。Weather Shield 採用Si7021 濕度/溫度感測器,MPL3115A2氣壓感測器和ALS-PT19光感測器。
特徵
- 濕度/溫度傳感器— Si7021
- 氣壓— MPL3115A2
- 光傳感器— ALS-PT19
Documents
=========================================================
SparkFun Weather Shield
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.
The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 Arduino libraries.
Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.
Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately; check the Wish List below or the Recommended Products on this page.
Note: This shield was designed for the SparkFun RedBoard and Arduino Uno and will not work with other boards (like the Arduino Yun, for example) without modification.
Features
- Humidity/Temperature Sensor — Si7021
- Barometric Pressure — MPL3115A2
Light Sensor — ALS-PT19
Documents
相關商品
-
Data Logging shield 資料記錄器模組 支援Arduino Uno資料記錄擴展板
0 滿分 5 分注意:RTC電池座不附CR1220 3V鈕釦電池,若有需要請自行購買安裝。
NT$190NT$100 未稅加入購物車Quick View -
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
0 滿分 5 分NT$762NT$680 未稅加入購物車Quick View -
SD Card Shield V4 擴展板 seeed原廠
0 滿分 5 分它提供了您的Arduino一個存儲空間。用戶可以讀/通過的Arduino內置的SD庫寫入SD卡。它支持SD,SDHC和Micro SD卡。它只會佔用你的Arduino的SPI端口。
加入購物車Quick View -
Relay Shield v3.0 繼電器擴充板支援Arduino單機片 seeed原廠
0 滿分 5 分如果你發現Arduino的小電流限制了你的發揮,那麼Relay Shield將會幫到你。這款Relay Shield簡單易用,它允許你使用簡單的靜態繼電器來控制4路大功率設備(每路上至8Amps,35 Volts)。
每一路都配備有LED指示燈以指示繼電器的當前工作狀態。高性能端子的使用使得Relay Shield的使用更加安全和可靠。對於大功率的Arduino項目或者機器人應用,這款Realy Shield將是理想的選擇。
NT$762NT$620 未稅加入購物車Quick View -
Grove Base Shield V2 for Arduino 感測器擴充板 seeed原廠
0 滿分 5 分NT$305NT$240 未稅加入購物車Quick View -
USB Host Shield 副廠 支援 Google Android ADK UNO MEGA 2560
0 滿分 5 分USB Host Shield讓您可以將USB器件與您的Arduino板連接。USB Host Shield基於MAX3421E(數據手冊),它是一款USB外設/主機控制器,實現了數字邏輯和模擬安全性,是執行全速USB外設或全速/低速主機與USB規格2.0版本所必須的。護盾與TinkerKit相兼容,這就意味著您可以通過將TinkerKit插入到開發板上來快速創建您的項目。
NT$476NT$438 未稅加入購物車Quick View -
L293D 馬達驅動擴展板/Motor Control Shield for Arduino
0 滿分 5 分L293D 馬達驅動擴展板 /Motor Control Shield for Arduino
Arduino 是一款很好的電子製作入門,有了馬達擴展板可以很好的成為機器人開發平臺。這裏介紹一款能驅動各種簡單到稍複雜項目的全功能的馬達擴展板。這是一款常用的直流馬達驅動模組,採用L293D晶片小電流直流馬達驅動晶片。管腳被做成了Arduino相容的,也方便了愛好者快速的基於Arduino的開發。
NT$229NT$114 未稅加入購物車Quick View -
加入購物車Quick View
Teensy Arduino Shield Adapter (Teensy擴展板 相容於Arduino) SparkFun原廠
0 滿分 5 分Teensy是一款很簡易開發平臺,您可以將其結合Arduino, Teensy Arduino Shield擴展板提供了這樣的功能
加入購物車Quick View -
Dragino LoRa 擴展板- 433M frequency 相容Arduino seeed原廠
0 滿分 5 分Dragino LoRa 433M frequency Arduino專用 Lora 擴展版
Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$860 未稅加入購物車Quick View -
UNO Proto Shield ProtoShield 原型擴展板 含麵包板
0 滿分 5 分ProtoShield原型擴展板上帶兩個LED和兩個按鈕電路,可以直接使用,全部引腳和電源均已引出,非常適合和Arduino配合構建電路原型。
NT$114NT$80 未稅加入購物車Quick View