Weather Shield 天氣感測擴展板 SparkFun原廠
NT$1,714 NT$1,380 未稅
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。
尚有庫存
- 商品說明
商品說明
SparkFun Weather Shield 天氣感測擴展板
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。該擴展板上還有可外加選購的感測器擴展端口,如風速,方向,雨量計和GPS,用於定位和超精准定時。Weather Shield 採用Si7021 濕度/溫度感測器,MPL3115A2氣壓感測器和ALS-PT19光感測器。
特徵
- 濕度/溫度傳感器— Si7021
- 氣壓— MPL3115A2
- 光傳感器— ALS-PT19
Documents
=========================================================
SparkFun Weather Shield
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.
The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 Arduino libraries.
Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.
Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately; check the Wish List below or the Recommended Products on this page.
Note: This shield was designed for the SparkFun RedBoard and Arduino Uno and will not work with other boards (like the Arduino Yun, for example) without modification.
Features
- Humidity/Temperature Sensor — Si7021
- Barometric Pressure — MPL3115A2
Light Sensor — ALS-PT19
Documents
相關商品
-
USB Host Shield 副廠 支援 Google Android ADK UNO MEGA 2560
0 滿分 5 分USB Host Shield讓您可以將USB器件與您的Arduino板連接。USB Host Shield基於MAX3421E(數據手冊),它是一款USB外設/主機控制器,實現了數字邏輯和模擬安全性,是執行全速USB外設或全速/低速主機與USB規格2.0版本所必須的。護盾與TinkerKit相兼容,這就意味著您可以通過將TinkerKit插入到開發板上來快速創建您的項目。
NT$476NT$438 未稅加入購物車Quick View -
加入購物車Quick View
美國官方授權經銷 Arduino ETHERNET SHIELD 2 乙太網路擴展板 2代 不含POE模組 義大利製
0 滿分 5 分義大利原廠 Arduino 乙太網路擴展板 2代 不含POE模組
Arduino Ethernet Shield 2 connects your Arduino board to the internet.
Plug The Arduino Ethernet Shield 2 module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. The Shield has a Power over Ethernet (PoE) module designed to extract power from a conventional Ethernet cable.
加入購物車Quick View -
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
0 滿分 5 分NT$762NT$680 未稅加入購物車Quick View -
CAN-BUS Shield v2.0 CANbus 控制器區域網路擴展板 適用於 Uno Leonardo MEGA2560 seeed原廠
0 滿分 5 分NT$800NT$660 未稅加入購物車Quick View -
Seeed BLE Shield (HM11) 藍牙擴展板 相容 arduino seeeduino
0 滿分 5 分Seeed BLE Shield 是一款低功耗藍牙4.0傳輸模組。模塊採用的是TI CC2540 晶片,配置256Kb空間,支持AT指令。你可以將此模塊應用於遙控、遊戲手柄、數據無線採集、智慧家居等領域。同時作為Shield系列的一員,它能很方便的直插到開發板上使用。
NT$724NT$500 未稅加入購物車Quick View -
SD Card Shield V4 擴展板 seeed原廠
0 滿分 5 分它提供了您的Arduino一個存儲空間。用戶可以讀/通過的Arduino內置的SD庫寫入SD卡。它支持SD,SDHC和Micro SD卡。它只會佔用你的Arduino的SPI端口。
加入購物車Quick View -
Grove W5500 Ethernet Shield W5500 乙太網路擴充板 for Arduino seeed原廠
0 滿分 5 分W5500乙太網屏蔽v1.0可以為您的項目提供互聯網連接.W5500使用戶能夠通過使用單芯片(其中有TCP / IP堆棧,10/100以太網MAC和PHY嵌入式)來實現應用中的互聯網連接。
NT$1,095NT$900 未稅加入購物車Quick View -
Arduino GSM Shield 2 義大利製 Arduino 原廠進口 內建集成天線
0 滿分 5 分注意:GSM Shield 僅適用於 2G 網絡。購買前請檢查您所在的國家/地區是否有通行的2G電信網絡可使用,不接受電信網路問題退貨 !
Arduino GSM Shield 2 擴展板可以利用GPRS無線網絡將Arduino連至網際網路。只需將該擴充版插到Arduino板上,插入來自於提供GPRS業務的運營商的SIM卡,按照幾個簡單的步驟即可開始通過網際網路控制您的世界。您還可以撥打/接聽語音電話(您需要1個外部揚聲器和麥克風電路)和發送/接收SMS信息。
NT$3,900NT$3,560 未稅加入購物車Quick View -
1Sheeld+ 高階版 Arduino 智慧手機多功能 擴展板 支援 iOS / Android 支援四十餘種功能
0 滿分 5 分高階版 Arduino 智慧手機多功能擴展板 支援 iOS / Android 支援四十餘種功能
1Sheeld +是一個易於配置的 Arduino 擴展板。它具有內置的藍牙模塊,可以讓您的Arduino能夠將自己連接到智慧手機。提供免費的 APP 可供串接應用。 Play Store和Apple Store上提供的1Sheeld +應用程序,您可以輕鬆地將 Android 和 iOS 智慧手機整合到你的專案
NT$2,724NT$2,200 未稅加入購物車Quick View -
MEGA Sensor Shield 感測器擴展板 相容Arduino
0 滿分 5 分MEGA Sensor Shield V1.0 專用感測器擴展板 相容Arduino
新推出的MEGA Sensor Shield 專用感測器擴展板集市面上各種擴展板優點於一體所設計,採用PCB沉金工藝加工,主板不僅將全部數位與類比介面以舵機線序形式擴展出來,還特設藍牙模組通信介面、SD卡模組通信介面、APC220無線射頻模組通信介面、以及RB URF v1.1超聲波感測器接 口,獨立擴出更加易用方便。對於Arduino初學者來說,不必為繁瑣複雜電路連線而頭疼了,這款感測器擴展板真正意義上的將電路簡化,能夠很容易地將常 用感測器連接起來,一款感測器僅需要一種通用3P感測器連接線(不分數位連接線與類比連接線),完成電路連接後,編寫相應的Arduino程式下載到Arduino MEGA控制器中讀取感測器資料、或者接收無線模組回傳資料,經過運算處理,最終輕鬆完成你自己的互動作品。
NT$238NT$219 未稅加入購物車Quick View