Weather Shield 天氣感測擴展板 SparkFun原廠
NT$1,714 NT$1,380 未稅
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。
尚有庫存
- 商品說明
商品說明
SparkFun Weather Shield 天氣感測擴展板
SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。該擴展板上還有可外加選購的感測器擴展端口,如風速,方向,雨量計和GPS,用於定位和超精准定時。Weather Shield 採用Si7021 濕度/溫度感測器,MPL3115A2氣壓感測器和ALS-PT19光感測器。
特徵
- 濕度/溫度傳感器— Si7021
- 氣壓— MPL3115A2
- 光傳感器— ALS-PT19
Documents
=========================================================
SparkFun Weather Shield
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional sensors such as wind speed, direction, rain gauge and GPS for location and super accurate timing.
The Weather Shield utilizes the Si7021 humidity/temperature sensor, the MPL3115A2 barometric pressure sensor and the ALS-PT19 light sensor. The shield relies on the Si7021 and MPL3115A2 Arduino libraries.
Each shield comes with two unpopulated RJ11 connector spaces (for optional hookup of rain and wind sensors) and a 6-pin GPS connector (for optional hookup of a GP635T GPS module). Finally, each Weather Shield can operate from 3.3V up to 16V and has built-in voltage regulators and signal translators.
Note: The Weather Shield comes as a stand-alone board. Headers, connectors and additional sensors will need to be purchased separately; check the Wish List below or the Recommended Products on this page.
Note: This shield was designed for the SparkFun RedBoard and Arduino Uno and will not work with other boards (like the Arduino Yun, for example) without modification.
Features
- Humidity/Temperature Sensor — Si7021
- Barometric Pressure — MPL3115A2
Light Sensor — ALS-PT19
Documents
相關商品
-
NANO UNO 多用途擴展板 相容Arduino
0 滿分 5 分UNO Nano Prototype Shield I/O Extension Board Module for Arduino
專門為Arduino NANO量身打造,焊上的兩排針腳,即可使用在Arduino duemilanove 2009 、UNO R3。該擴展板,解決了NANO在連接多款傳感器的時候佈線混亂的問題,成為你開發Arduino作品的利器.
NT$143NT$60 未稅加入購物車Quick View -
Seeed BLE Shield (HM11) 藍牙擴展板 相容 arduino seeeduino
0 滿分 5 分Seeed BLE Shield 是一款低功耗藍牙4.0傳輸模組。模塊採用的是TI CC2540 晶片,配置256Kb空間,支持AT指令。你可以將此模塊應用於遙控、遊戲手柄、數據無線採集、智慧家居等領域。同時作為Shield系列的一員,它能很方便的直插到開發板上使用。
NT$724NT$500 未稅加入購物車Quick View -
CAN-BUS Shield v2.0 CANbus 控制器區域網路擴展板 適用於 Uno Leonardo MEGA2560 seeed原廠
0 滿分 5 分NT$800NT$660 未稅加入購物車Quick View -
Grove Base Shield V2 for Arduino 感測器擴充板 seeed原廠
0 滿分 5 分NT$305NT$240 未稅加入購物車Quick View -
Wifi Shield V2.0 Arduino/ Seeeduino 無線網路 wifi 擴展板 seeed原廠
0 滿分 5 分NT$1,762NT$1,420 未稅加入購物車Quick View -
L293D 馬達驅動擴展板/Motor Control Shield for Arduino
0 滿分 5 分L293D 馬達驅動擴展板 /Motor Control Shield for Arduino
Arduino 是一款很好的電子製作入門,有了馬達擴展板可以很好的成為機器人開發平臺。這裏介紹一款能驅動各種簡單到稍複雜項目的全功能的馬達擴展板。這是一款常用的直流馬達驅動模組,採用L293D晶片小電流直流馬達驅動晶片。管腳被做成了Arduino相容的,也方便了愛好者快速的基於Arduino的開發。
NT$229NT$114 未稅加入購物車Quick View -
副廠 Ethernet Shield W5100 R3 網路擴展板 相容 Arduino 支持 Mega
0 滿分 5 分副廠 Ethernet Shield W5100 R3 網路擴展板 Micro SD 支持 Mega,
1. Ethernet W5100 rev 3 網絡擴展板,可以使 Arduino 成為簡單的 Web 伺服器或者透過網路存取 Arduino IO 介面等網路應用。
2. 直接使用 IDE 中的 Ethernet 函式庫便可實現一個簡單 Web 伺服器。
3. 板載 mini SD 卡(TF卡)擴充埠,功能強悍!
4. 採用了可堆疊的設計,可直接插到 Arduino 上,同時也可以堆疊在其他擴展板上。
5. 支援 UNO R3、Leonardo R3 與 MEGA2560 R3 開發板。NT$457NT$400 未稅加入購物車Quick View -
Arduino GSM Shield 2 義大利製 Arduino 原廠進口 內建集成天線
0 滿分 5 分注意:GSM Shield 僅適用於 2G 網絡。購買前請檢查您所在的國家/地區是否有通行的2G電信網絡可使用,不接受電信網路問題退貨 !
Arduino GSM Shield 2 擴展板可以利用GPRS無線網絡將Arduino連至網際網路。只需將該擴充版插到Arduino板上,插入來自於提供GPRS業務的運營商的SIM卡,按照幾個簡單的步驟即可開始通過網際網路控制您的世界。您還可以撥打/接聽語音電話(您需要1個外部揚聲器和麥克風電路)和發送/接收SMS信息。
NT$3,900NT$3,560 未稅加入購物車Quick View -
LCD Keypad Shield LCD 1602 液晶按鍵擴展板 相容Arduino
0 滿分 5 分NT$238NT$143 未稅加入購物車Quick View -
Dragino LoRa 擴展板- 433M frequency 相容Arduino seeed原廠
0 滿分 5 分Dragino LoRa 433M frequency Arduino專用 Lora 擴展版
Dragino LORA擴展板 是一個專門為 Arduino 所設計的 Lora 功能 擴展板 , Lora 擴展板基於開放源碼庫,允許用戶發送數據,達到極長的範圍在低 data-rates.it 提供超遠距離擴頻通信和高抗干擾性的同時儘量減少電流消耗。
NT$1,133NT$860 未稅加入購物車Quick View