moto:bit 電機腳位引出 Micro:bit 專用擴展板 SparkFun原廠
NT$648 NT$560 未稅
尚有庫存
- 商品說明
商品說明
SparkFun moto:bit 電機腳位引出 Micro:bit 專用 擴展板
為您提供功能全面的機器人平台。moto:bit 供了一個簡單的,初學者友好的機器人控制器,能夠操作基本的機器人底盤。 在每個 moto:bit 能夠掛接伺服舵機,傳感器和其他電路的多個I / O引腳。 在開關翻轉時,你可以得到你的 Micro:bit 更方便運用與學習。SparkFun moto:bit 通過板頂部的邊緣連接器連接微處理器:使設置變得簡單。 這樣可以方便地 Micro:bit 用於編程,同時仍然提供與Micro:bit 上所有不同引腳的擴展與銜接。
特徵
- 邊緣連接器,便於使用micro:bit
- 全H橋控制兩個電機
- 控制伺服電機
- I 2 C端口用於擴展功能
- micro:bit板載電源和電池管理
Documents
=========================================================
SparkFun moto:bit
The SparkFun moto:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller capable of operating a basic robotics chassis. Onboard each moto:bit are multiple I/O pins capable of hooking up servos, sensors and other circuits. At the flip of the switch you can get your micro:bit moving!
The moto:bit connects to the micro:bit via an edge connector at the top of the board, making setup easy. This creates a handy way to swap out micro:bits for programming, while still providing reliable connections to all of the different pins on the micro:bit. We have also included a basic barrel jack on the moto:bit that is capable of providing power to anything you connect to the carrier board.
Features
- Edge connector for easy use with the micro:bit
- Full H-Bridge for control of two motors
- Control servo motors
- I2C port for extending functionality
- Power and battery management onboard for the micro:bit
Documents
- Schematic
- Eagle Files
- Experiment Guide
- micro:bit Getting Started Guide
- About micro:bit Page
- micro:bit Apps
- GitHub
相關商品
-
CAN-BUS Shield v2.0 CANbus 控制器區域網路擴展板 適用於 Uno Leonardo MEGA2560 seeed原廠
0 滿分 5 分NT$800NT$660 未稅加入購物車Quick View -
Multi-Function Shield 多功能擴展板 支援Arduino單片機開發板
0 滿分 5 分NT$295NT$260 未稅加入購物車Quick View -
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
0 滿分 5 分NT$762NT$680 未稅加入購物車Quick View -
LoRa/GPS Shield For Arduino LoRa Bee 含 GPS 衛星定位模組 868MHz 無線射頻擴展板
0 滿分 5 分LoRa部分,LoRa / GPS Shield採用SX1276 / SX1278收發器.LRRa / GPS Shield的收發器採用了LoRa™長距離調製解調器,可提供超長距離擴頻通信和高抗干擾能力,同時最小化電流消費。與常規調製技術相比,LoRa™在阻塞和選擇性方面也具有顯著的優勢,解決了傳感器在範圍,抗干擾能力和能量消耗之間的折衷。在GPS部分,L80 GPS(基於MTK MT3339)的添加是專為通過串行端口連接到GPS的應用程序而設計的,如定時應用或需要GPS信息的一般應用。該GPS模塊可以計算和使用存儲在內部閃存中的星曆數據(長達3天)自動預測軌道,因此即使在低功耗的室內信號水平下,屏蔽也可以快速固定位置。通過AlwaysLocate™技術,LoRa / GPS Shield可以自適應地調整開/關時間,根據環境和運動條件實現定位精度和功耗之間的平衡。GPS還支持自動天線切換功能。它可以實現內部貼片天線與外部主動天線的切換。
NT$1,381NT$1,240 未稅加入購物車Quick View -
Arduino GSM Shield 2 義大利製 Arduino 原廠進口 內建集成天線
0 滿分 5 分注意:GSM Shield 僅適用於 2G 網絡。購買前請檢查您所在的國家/地區是否有通行的2G電信網絡可使用,不接受電信網路問題退貨 !
Arduino GSM Shield 2 擴展板可以利用GPRS無線網絡將Arduino連至網際網路。只需將該擴充版插到Arduino板上,插入來自於提供GPRS業務的運營商的SIM卡,按照幾個簡單的步驟即可開始通過網際網路控制您的世界。您還可以撥打/接聽語音電話(您需要1個外部揚聲器和麥克風電路)和發送/接收SMS信息。
NT$3,900NT$3,560 未稅加入購物車Quick View -
Grove Base Shield V2 for Arduino 感測器擴充板 seeed原廠
0 滿分 5 分NT$305NT$240 未稅加入購物車Quick View -
UNO Proto Shield ProtoShield 原型擴展板 含麵包板
0 滿分 5 分ProtoShield原型擴展板上帶兩個LED和兩個按鈕電路,可以直接使用,全部引腳和電源均已引出,非常適合和Arduino配合構建電路原型。
NT$114NT$80 未稅加入購物車Quick View -
加入購物車Quick View
Teensy Arduino Shield Adapter (Teensy擴展板 相容於Arduino) SparkFun原廠
0 滿分 5 分Teensy是一款很簡易開發平臺,您可以將其結合Arduino, Teensy Arduino Shield擴展板提供了這樣的功能
加入購物車Quick View -
副廠 Ethernet Shield W5100 R3 網路擴展板 相容 Arduino 支持 Mega
0 滿分 5 分副廠 Ethernet Shield W5100 R3 網路擴展板 Micro SD 支持 Mega,
1. Ethernet W5100 rev 3 網絡擴展板,可以使 Arduino 成為簡單的 Web 伺服器或者透過網路存取 Arduino IO 介面等網路應用。
2. 直接使用 IDE 中的 Ethernet 函式庫便可實現一個簡單 Web 伺服器。
3. 板載 mini SD 卡(TF卡)擴充埠,功能強悍!
4. 採用了可堆疊的設計,可直接插到 Arduino 上,同時也可以堆疊在其他擴展板上。
5. 支援 UNO R3、Leonardo R3 與 MEGA2560 R3 開發板。NT$457NT$400 未稅加入購物車Quick View -
Data Logging shield 資料記錄器模組 支援Arduino Uno資料記錄擴展板
0 滿分 5 分注意:RTC電池座不附CR1220 3V鈕釦電池,若有需要請自行購買安裝。
NT$190NT$100 未稅加入購物車Quick View