moto:bit 電機腳位引出 Micro:bit 專用擴展板 SparkFun原廠
NT$648 NT$560 未稅
尚有庫存
- 商品說明
商品說明
SparkFun moto:bit 電機腳位引出 Micro:bit 專用 擴展板
為您提供功能全面的機器人平台。moto:bit 供了一個簡單的,初學者友好的機器人控制器,能夠操作基本的機器人底盤。 在每個 moto:bit 能夠掛接伺服舵機,傳感器和其他電路的多個I / O引腳。 在開關翻轉時,你可以得到你的 Micro:bit 更方便運用與學習。SparkFun moto:bit 通過板頂部的邊緣連接器連接微處理器:使設置變得簡單。 這樣可以方便地 Micro:bit 用於編程,同時仍然提供與Micro:bit 上所有不同引腳的擴展與銜接。
特徵
- 邊緣連接器,便於使用micro:bit
- 全H橋控制兩個電機
- 控制伺服電機
- I 2 C端口用於擴展功能
- micro:bit板載電源和電池管理
Documents
=========================================================
SparkFun moto:bit
The SparkFun moto:bit is a fully loaded “carrier” board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional robotics platform. The moto:bit offers a simple, beginner-friendly robotics controller capable of operating a basic robotics chassis. Onboard each moto:bit are multiple I/O pins capable of hooking up servos, sensors and other circuits. At the flip of the switch you can get your micro:bit moving!
The moto:bit connects to the micro:bit via an edge connector at the top of the board, making setup easy. This creates a handy way to swap out micro:bits for programming, while still providing reliable connections to all of the different pins on the micro:bit. We have also included a basic barrel jack on the moto:bit that is capable of providing power to anything you connect to the carrier board.
Features
- Edge connector for easy use with the micro:bit
- Full H-Bridge for control of two motors
- Control servo motors
- I2C port for extending functionality
- Power and battery management onboard for the micro:bit
Documents
- Schematic
- Eagle Files
- Experiment Guide
- micro:bit Getting Started Guide
- About micro:bit Page
- micro:bit Apps
- GitHub
相關商品
-
Weather Shield 天氣感測擴展板 SparkFun原廠
0 滿分 5 分SparkFun Weather Shield是一款易於使用的 Arduino 擴展板,可讓您獲得氣壓,相對濕度,亮度和溫度。
NT$1,714NT$1,380 未稅加入購物車Quick View -
NANO UNO 多用途擴展板 相容Arduino
0 滿分 5 分UNO Nano Prototype Shield I/O Extension Board Module for Arduino
專門為Arduino NANO量身打造,焊上的兩排針腳,即可使用在Arduino duemilanove 2009 、UNO R3。該擴展板,解決了NANO在連接多款傳感器的時候佈線混亂的問題,成為你開發Arduino作品的利器.
NT$143NT$60 未稅加入購物車Quick View -
CAN-BUS Shield v2.0 通訊擴展板 適用於 Arduino Uno Leonardo MEGA2560 DFRobot原廠
0 滿分 5 分NT$762NT$680 未稅加入購物車Quick View -
XBee Sensor Shield 感測器擴展板 帶 XBee/ RS485 接口
0 滿分 5 分NT$305NT$286 未稅加入購物車Quick View -
UNO Proto Shield ProtoShield 原型擴展板 含麵包板
0 滿分 5 分ProtoShield原型擴展板上帶兩個LED和兩個按鈕電路,可以直接使用,全部引腳和電源均已引出,非常適合和Arduino配合構建電路原型。
NT$114NT$86 未稅加入購物車Quick View -
Seeed BLE Shield (HM11) 藍牙擴展板 相容 arduino seeeduino
0 滿分 5 分Seeed BLE Shield 是一款低功耗藍牙4.0傳輸模組。模塊採用的是TI CC2540 晶片,配置256Kb空間,支持AT指令。你可以將此模塊應用於遙控、遊戲手柄、數據無線採集、智慧家居等領域。同時作為Shield系列的一員,它能很方便的直插到開發板上使用。
NT$724NT$500 未稅加入購物車Quick View -
Data Logging shield 資料記錄器模組 支援Arduino 資料記錄擴展板
0 滿分 5 分注意:RTC電池座不附CR1220 3V鈕釦電池,若有需要請自行購買安裝。
NT$238NT$190 未稅加入購物車Quick View -
Grove Base Shield V2 for Arduino 感測器擴充板 seeed原廠
0 滿分 5 分NT$305NT$240 未稅加入購物車Quick View -
加入購物車Quick View
美國官方授權經銷 Arduino ETHERNET SHIELD 2 乙太網路擴展板 2代 不含POE模組 義大利製
0 滿分 5 分義大利原廠 Arduino 乙太網路擴展板 2代 不含POE模組
Arduino Ethernet Shield 2 connects your Arduino board to the internet.
Plug The Arduino Ethernet Shield 2 module onto your Arduino Board, connect it to your network with an RJ45 cable (not included) and follow a few simple steps to start controlling your world through the internet. The Shield has a Power over Ethernet (PoE) module designed to extract power from a conventional Ethernet cable.
加入購物車Quick View -
副廠 Ethernet Shield W5100 R3 網路擴展板 相容 Arduino 支持 Mega
0 滿分 5 分副廠 Ethernet Shield W5100 R3 網路擴展板 Micro SD 支持 Mega,
1. Ethernet W5100 rev 3 網絡擴展板,可以使 Arduino 成為簡單的 Web 伺服器或者透過網路存取 Arduino IO 介面等網路應用。
2. 直接使用 IDE 中的 Ethernet 函式庫便可實現一個簡單 Web 伺服器。
3. 板載 mini SD 卡(TF卡)擴充埠,功能強悍!
4. 採用了可堆疊的設計,可直接插到 Arduino 上,同時也可以堆疊在其他擴展板上。
5. 支援 UNO R3、Leonardo R3 與 MEGA2560 R3 開發板。NT$457NT$400 未稅加入購物車Quick View